My "other" project - the shepherd's hut

Tell us about any of your non-Land Rover projects here. These may be military or non-military, motorbikes, cars, lorries, planes etc. It's interesting to see what others have in their collections and what they are working on besides their Land Rover(s).
User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: My "other" project - the shepherd's hut

Post by removeduser185 » Sun Sep 29, 2019 5:36 pm

As promised, some photos. My goodness, it has been wet. All the streams around here are cascading down the hills, the river is fast, wide and brown with mud and the reservoir is running over the spillway. Add to that very high gusts of wind. Autumnal equinox weather!
Hut as at 28 Sep 19 12.JPG
Hut as at 28 Sep 19 12.JPG (552.28 KiB) Viewed 8995 times
Hut as at 28 Sep 19 2.JPG
Hut as at 28 Sep 19 2.JPG (493.73 KiB) Viewed 8995 times
This is how it is looking now I have glazed one of the windows and fitted the wriggly tin onto three sides. I still need to make doors and steps, as you can see!

Inside, I have painted most of the cladding and done the architrave round the windows and I am still waiting for the putty to dry before I clean the glass:
Hut as at 28 Sep 19 10.JPG
Hut as at 28 Sep 19 10.JPG (479.49 KiB) Viewed 8995 times
Hut as at 28 Sep 19 9.JPG
Hut as at 28 Sep 19 9.JPG (469.92 KiB) Viewed 8995 times
On the outside, there will be right-angle corner pieces to cover the wall joins. And, yes, I know some of the techbolts aren't level, but, doing this on your own means you are holding the sheet in place with one hand while using the driver with the other and trying not to let anything slip so judging exactly where the bolt should go in is tricky!

Fossibear
Posts: 430
Joined: Sun Nov 18, 2018 1:20 pm
Location: Nordkirchen / Germany

Re: My "other" project - the shepherd's hut

Post by Fossibear » Sun Sep 29, 2019 7:23 pm

Very nice how it gets ready more and more -
Not at least: next winter will come ;)

I like it, Steve
It's supposed to look like that, it's crochet...

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: My "other" project - the shepherd's hut

Post by removeduser185 » Sat Oct 05, 2019 8:58 pm

A busy time of it, despite the weather which has been dreadful. It has rained pretty much all day every day for a fortnight now. I wish I were building an ark instead! So, I haven't been able to finish the outside until today when it stayed dry all morning - long enough for me to finish the wriggly tin cladding - apart from the edge pieces which I have ordered but which I shan't collect until Monday. I also got the window glazed at the end over the bed and started fiddling with the stove - in preparation for cutting a hole in the roof for the chimney.

During the week I got the floor laid and the bed in place as well as most of the skirting and dado rails which have now been painted.

So it now looks like this:
This is the bed frame -
Bed in place 4 Oct 19.JPG
Bed in place 4 Oct 19.JPG (90.08 KiB) Viewed 8935 times
The last bit of cladding and the window glazed -
End window glazed 5 Oct 19.JPG
End window glazed 5 Oct 19.JPG (122.53 KiB) Viewed 8935 times
This is what the stove will look like. The flue is very thick because, in a wooden building the flue has to be insulated so it is what is known as twinwall, which has a layer of insulation wrapped round the inner flue itself. In fact there's a piece of chimney to the left of the stove so you can see the insulation.
Stove in place with chimney loosely in place 5 Oct 19.JPG
Stove in place with chimney loosely in place 5 Oct 19.JPG (79.21 KiB) Viewed 8935 times
As you can see, I still have the door and the steps to make.
Working on the hut in the rain 5 Oct 19.JPG
Working on the hut in the rain 5 Oct 19.JPG (124.05 KiB) Viewed 8935 times
In fact, it wasn't raining at this point, so I had taken everything out of the hut to lay the floor, but not the sheets to cover everything up quickly if (when) it comes on to rain.

Otherwise, most of what is left is the detailing. So, we're getting there, but, tomorrow I have a nice trio to Newbury!

Fossibear
Posts: 430
Joined: Sun Nov 18, 2018 1:20 pm
Location: Nordkirchen / Germany

Re: My "other" project - the shepherd's hut

Post by Fossibear » Sun Oct 06, 2019 8:00 am

Hi Fred,

are you shure that the oven is „big enough“ to warm up the hut if you have the flue insulated?

But again: very very nice project :)

Steve
It's supposed to look like that, it's crochet...

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: My "other" project - the shepherd's hut

Post by removeduser185 » Mon Oct 07, 2019 5:14 pm

Fossibear wrote: ↑
Sun Oct 06, 2019 8:00 am
Hi Fred,

are you shure that the oven is „big enough“ to warm up the hut if you have the flue insulated?

But again: very very nice project :)

Steve
I certainly hope so. According to the calculation based on volume of space to be heated it should need a stove capable of 1.5kW. This one is 5kW! It's probably bigger than it looks!

Ridgy
Pastry Chef
Posts: 677
Joined: Fri Oct 03, 2014 12:35 pm
Location: Essex

Re: My "other" project - the shepherd's hut

Post by Ridgy » Mon Oct 07, 2019 6:19 pm

Glad you're getting on a bit Fred, despite the Welsh weather. If it's any consolation, it's not much drier in "semi arid" East Anglia. Which I could live with if it weren't for the fact I currently have a garage with no cladding and an extension with half a roof!

Cheers

Steve
57 KB 58 1983 SIII GS Lightweight

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: My "other" project - the shepherd's hut

Post by removeduser185 » Mon Oct 07, 2019 7:51 pm

Ridgy wrote: ↑
Mon Oct 07, 2019 6:19 pm
you're getting on a bit Fred,
Steve
'ere, I'm only 62!

But thank you! Trying to do any kind of project anywhere in Britain this autumn is a bit fraught - either too wet or too windy or, in Wales, usually both! Nice that it stayed dry at Newbury, though.

Fossibear
Posts: 430
Joined: Sun Nov 18, 2018 1:20 pm
Location: Nordkirchen / Germany

Re: My "other" project - the shepherd's hut

Post by Fossibear » Mon Oct 07, 2019 8:37 pm

Ok Fred, if it really has 5 kw, then it should really be big enough :)
It looked so small to me

Whishing warm hours in your Hut,
Steve
It's supposed to look like that, it's crochet...

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: My "other" project - the shepherd's hut

Post by removeduser185 » Tue Oct 08, 2019 11:54 pm

Not raining first thing, so I excused myself from dog-walking in order to make the hole in the roof for the chimney. So what happened? It pissed down - just after I'd made the first cut. So there I was, at the top of a ladder with a mains-powered Dremel in my hand and the rain running down my neck. It got so bad I had to stop, so I hastily covered the hole with masking tape and went off to the garage to finish painting the fascia and barge boards. So it dried up - as long as I stayed in the garage. Every time I emerged... it pissed down again. Eventually, though, I succeeded and this was the result:
The first lighting of the stove 8 Oct 19.JPG
The first lighting of the stove 8 Oct 19.JPG (69.31 KiB) Viewed 8858 times
smoke rises from the chimney 8 Oct 19.JPG
smoke rises from the chimney 8 Oct 19.JPG (170 KiB) Viewed 8858 times
Doggo and stove 8 Oct 19.JPG
Doggo and stove 8 Oct 19.JPG (77.88 KiB) Viewed 8858 times
Puffing billy 8 Oct 19.JPG
Puffing billy 8 Oct 19.JPG (139.22 KiB) Viewed 8858 times
With that done things began to dry up a bit and, after lunch, I was able to put the edge pieces on the sides of the outside cladding to finish the wriggly tin. You can see one of them resting on the ground, but in the right place, in the photo of the hut above.I was amazed - I got these made up for me - 4 of them each of 3"x7'6" right angle in PVC-covered galv - a fiver!

Then I painted the overhangs under the eaves and allowed the stove to warm through and cure the cement. No leaks and the hut was as warm as toast despite it being a very small fire and the hut having no doors! So, all being well, tomorrow I will fit the barge boards and fascia which will finish the outside. Then there is the rest of the wall and ceiling which had been left off until the chimney was in place, the doors and steps.

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: My "other" project - the shepherd's hut

Post by removeduser185 » Wed Oct 16, 2019 10:29 pm

What have I been up to lately? Well, the bed is in and the soft furnishings are starting to arrive - the curtains, blinds, bedding and so on.
SAM_3081.JPG
SAM_3081.JPG (456.72 KiB) Viewed 8766 times
I have made a set of steps
SAM_3077.JPG
SAM_3077.JPG (487.2 KiB) Viewed 8766 times
and started the door frames
SAM_3083.JPG
SAM_3083.JPG (471.96 KiB) Viewed 8766 times
and done a bit of tidying inside, finishing the roof, touching up the paint and so on.
SAM_3079.JPG
SAM_3079.JPG (462.02 KiB) Viewed 8766 times

Post Reply