Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
User avatar
Sidders101
Bake Off Judge
Posts: 2406
Joined: Wed Apr 02, 2014 7:57 pm
Location: Winchester

Re: Monty the rather rusty 2A - 37FG31

Post by Sidders101 » Fri Aug 09, 2019 1:27 pm

Brother..in case you weren't aware.....some of us fit timber noggins/batons inside the 2 tailgate leaves before reassembly..this helps in preventing bowing/bending/sinking of the inner panel when loading/standing when tailgate is lowered.
Sidders


1974 Series 3 LWT 12v RHD 69-FM-24 , Royal Marines ("Intrepid")
1976 101 forward control gun tractor 12v RHD- 73-FL-43 ex 1,2 & 3 Para ("Kryten")
1979 Sankey NT Trailer 06-HF-86 78 Engr Reg (Herman)
1978 Trophy Frank Spencer impression (1st place)

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Aug 09, 2019 3:04 pm

Sidders101 wrote: ↑
Fri Aug 09, 2019 1:27 pm
Brother..in case you weren't aware.....some of us fit timber noggins/batons inside the 2 tailgate leaves before reassembly..this helps in preventing bowing/bending/sinking of the inner panel when loading/standing when tailgate is lowered.
I remember from your rebuild thread Sid me old heave-ho. My plan is to use top hat sections rather than timber, but the effect is the same hopefully. Tally ho squadron leader!

Andy

Macvfork
Pastry Chef
Posts: 717
Joined: Sun Aug 17, 2014 3:31 pm
Location: Heathfield, sussex

Re: Monty the rather rusty 2A - 37FG31

Post by Macvfork » Sun Aug 11, 2019 8:15 am

Morning Andy,
Top hat sections sound like a cunning plan. Will you glue it or rivet in place.
At least if water gets in it won’t get middle aged spread.

May I trouble you for a template of the drop down no plate doberry please?

Saw this one on the back of a later FG the other day.



Cheers
Mac
Attachments
E0055F6D-CF2E-4EE8-BC4F-015AB2D9D4C3.jpeg
E0055F6D-CF2E-4EE8-BC4F-015AB2D9D4C3.jpeg (1.58 MiB) Viewed 2365 times
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Aug 11, 2019 10:29 am

Hi Mac, I’m in London until later this afternoon but will draw it up for you when I get in.

I think there may already be one on here somewhere?

It’s the simplest of pieces - just a rectangular piece of ally and the two hinges / pins are the same as you’d find on a bulkhead vent cover.

You can glue them together, or maybe for authenticity pop down to your local fabricators and get them to put a couple of spot welds on each hinge.

Andy

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Aug 11, 2019 10:33 am

Macvfork wrote: ↑
Sun Aug 11, 2019 8:15 am
Morning Andy,
Top hat sections sound like a cunning plan. Will you glue it or rivet in place.
At least if water gets in it won’t get middle aged spread.

May I trouble you for a template of the drop down no plate doberry please?

Saw this one on the back of a later FG the other day.



Cheers
Mac
viewtopic.php?t=6471

Knew it was here somewhere.

Andy

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: Monty the rather rusty 2A - 37FG31

Post by chipbury » Sun Aug 11, 2019 11:41 am

andrewjsimpson1977 wrote: ↑
Fri Aug 09, 2019 12:14 pm
chipbury wrote: ↑
Fri Aug 09, 2019 8:58 am
Hi Andy,

Just catching up after six weeks away - some good progress when you see it in one go.

Personally I don't see the need to have a full plot - much overrated.

If you need any more taps/dies in particular sizes just let me know as I've got loads of spares available to deserving homes (same goes to anyone else reading :D ).

Cheers,

Chris
That’s very interesting Chris and very good of you to offer. I need a tap for the forward tub / seatbelt bracket mounting holes and a die for the thread on the bulkhead support bar on the passenger side. I’ll have a look tonight and PM you which ones in case you have them if that’s ok?
No problem Andy.
2A - 39 FG 70

Macvfork
Pastry Chef
Posts: 717
Joined: Sun Aug 17, 2014 3:31 pm
Location: Heathfield, sussex

Re: Monty the rather rusty 2A - 37FG31

Post by Macvfork » Sun Aug 11, 2019 2:11 pm

Knew it was here somewhere.

Andy
[/quote]

That’s brilliant service for you. Thank you
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon Aug 12, 2019 4:33 pm

A few photos from the bulkhead massacre (look away if you are of a squeamish disposition):


Dash box top (well, lack of) is more visible now it’s removed..

FFA974C4-8197-49B8-B9E7-47E86AFBF179.jpeg
FFA974C4-8197-49B8-B9E7-47E86AFBF179.jpeg (807.74 KiB) Viewed 2309 times

De-rusting took a few scrubs and dips (in fact this is only halfway through - it’s still in the tank)..

A98471D5-E758-4D8D-A0A2-E74ED4BC3217.jpeg
A98471D5-E758-4D8D-A0A2-E74ED4BC3217.jpeg (1.39 MiB) Viewed 2309 times
CB63E654-F715-4BC8-ABA8-DD86A5C3976B.jpeg
CB63E654-F715-4BC8-ABA8-DD86A5C3976B.jpeg (922.14 KiB) Viewed 2309 times

Stripping everything down did at least give me better access to the inside of the goalpost, as in doing so I found a couple more repairs were needed. It’s now bolted up to the chassis to prevent warping / misalignment until the other bits are spot welded on. How do you like the new ‘maxi vent’ bulkhead?

9A5212EF-385E-4BDB-AA05-199868E6D438.jpeg
9A5212EF-385E-4BDB-AA05-199868E6D438.jpeg (853.58 KiB) Viewed 2309 times
I filled the remaining holes in the goalpost, but have run out of MIG wire again, so the new dash box tops and the final repair to replace the missing lower mounting tab for the leg vanity panel will have to wait ‘til later in the week.

Hopefully the dremel and steel sheet will arrive over the next couple of days so I can cut out and ‘press’ the new dash fascia.

All the best,

Andy

landylees
Pastry Chef
Posts: 639
Joined: Mon Jan 29, 2018 8:43 pm
Location: Bishops Stortford

Re: Monty the rather rusty 2A - 37FG31

Post by landylees » Mon Aug 12, 2019 10:11 pm

andrewjsimpson1977 wrote: ↑
Mon Aug 12, 2019 4:33 pm
A few photos from the bulkhead massacre (look away if you are of a squeamish disposition):


Dash box top (well, lack of) is more visible now it’s removed..


FFA974C4-8197-49B8-B9E7-47E86AFBF179.jpeg


De-rusting took a few scrubs and dips (in fact this is only halfway through - it’s still in the tank)..


A98471D5-E758-4D8D-A0A2-E74ED4BC3217.jpeg


CB63E654-F715-4BC8-ABA8-DD86A5C3976B.jpeg


Stripping everything down did at least give me better access to the inside of the goalpost, as in doing so I found a couple more repairs were needed. It’s now bolted up to the chassis to prevent warping / misalignment until the other bits are spot welded on. How do you like the new ‘maxi vent’ bulkhead?


9A5212EF-385E-4BDB-AA05-199868E6D438.jpeg

I filled the remaining holes in the goalpost, but have run out of MIG wire again, so the new dash box tops and the final repair to replace the missing lower mounting tab for the leg vanity panel will have to wait ‘til later in the week.

Hopefully the dremel and steel sheet will arrive over the next couple of days so I can cut out and ‘press’ the new dash fascia.

All the best,

Andy
Wow....I was slightly worried that you had cut too much off but then I realised you had left the rain channel so ok after all!

Here was I worried about my rear tub, looking forward to seeing this come back together!
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon Aug 12, 2019 10:24 pm

landylees wrote: ↑
Mon Aug 12, 2019 10:11 pm

Wow....I was slightly worried that you had cut too much off but then I realised you had left the rain channel so ok after all!

Here was I worried about my rear tub, looking forward to seeing this come back together!
Haha yes I tried to find a reason to cut it off but apart from a small weld that had broken free and a tiny pinhole there was nothing wrong with it.

I sort of need it there as the new top sections of the dash box need to attach to it. I have to say, that although there has been a lot of metalwork needed with this project, the feeling of achievement has been massive at various stages, and I think for the next one I would probably start with an equally rotten example all over again.

I did say you were going to win this one!

Andy

Post Reply