Monty the rather rusty 2A - 37FG31
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Floor mounting tabs bent over:
Then spent ten minutes or so bending it over my knee, stopping to compare every now and then with the original:
..here’s a comparison with the real thing. The right hand curve needs work, as it starts too early - but otherwise it’s a pretty good match for the original. I should be able to finish it off tomorrow and get the panels clamped together. The acid test is when it mates up with the heater panel and the gearbox tunnel vanity end plate.
Off to walk the dog now so that’s it for today,
All the best,
Andy
Then spent ten minutes or so bending it over my knee, stopping to compare every now and then with the original:
..here’s a comparison with the real thing. The right hand curve needs work, as it starts too early - but otherwise it’s a pretty good match for the original. I should be able to finish it off tomorrow and get the panels clamped together. The acid test is when it mates up with the heater panel and the gearbox tunnel vanity end plate.
Off to walk the dog now so that’s it for today,
All the best,
Andy
Re: Monty the rather rusty 2A - 37FG31
Hiya Andy!
,
Nice fabrication work going on there mate.
Regards,
Nice fabrication work going on there mate.
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: Monty the rather rusty 2A - 37FG31
That's brilliant, mate. Really impressive and I can't wait to see it finished.
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: Monty the rather rusty 2A - 37FG31
Yep, so am I!andrewjsimpson1977 wrote: ↑Sun Sep 15, 2019 10:35 pm
Fred - looking forward to perusing the stalls with you at Newbury![]()
Re: Monty the rather rusty 2A - 37FG31
i'm planning on being there tooFred wrote: ↑Sun Sep 15, 2019 11:16 pmYep, so am I!andrewjsimpson1977 wrote: ↑Sun Sep 15, 2019 10:35 pm
Fred - looking forward to perusing the stalls with you at Newbury![]()
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Anything you’re short of mate that I might have? Shout out as I’m bringing a couple of bits for Fred and Richard anyway so it’s no hassle.
Re: Monty the rather rusty 2A - 37FG31
Has 1 item for Andy for Newbury, and aim to bring along the other freebie bits we got, if nobody wants them, I am sure they will sell and I can donate to the club funds
Regards
Richard
Discovery Sport
15FM83 ex 15 Para and 7 PO's
Richard
Discovery Sport
15FM83 ex 15 Para and 7 PO's
- Sidders101
- Bake Off Judge
- Posts: 2406
- Joined: Wed Apr 02, 2014 7:57 pm
- Location: Winchester
Re: Monty the rather rusty 2A - 37FG31
I will be there in the usual place offering a chair and MAYBE a cuppa...there will be shelter if its raining...very welcome to leave bits safely whilst hunting.
Sidders
1974 Series 3 LWT 12v RHD 69-FM-24 , Royal Marines ("Intrepid")
1976 101 forward control gun tractor 12v RHD- 73-FL-43 ex 1,2 & 3 Para ("Kryten")
1979 Sankey NT Trailer 06-HF-86 78 Engr Reg (Herman)
1978 Trophy Frank Spencer impression (1st place)
1974 Series 3 LWT 12v RHD 69-FM-24 , Royal Marines ("Intrepid")
1976 101 forward control gun tractor 12v RHD- 73-FL-43 ex 1,2 & 3 Para ("Kryten")
1979 Sankey NT Trailer 06-HF-86 78 Engr Reg (Herman)
1978 Trophy Frank Spencer impression (1st place)
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Nice one Sid, looking forward to a brew and a natter.Sidders101 wrote: ↑Sun Sep 22, 2019 8:20 amI will be there in the usual place offering a chair and MAYBE a cuppa...there will be shelter if its raining...very welcome to leave bits safely whilst hunting.
So this week I’ve been pretty busy with work, and the weekend has been mostly spending time with the kids, but I did get in a little tinkering in here and there..
Lifted the tub back up to tap the new bolt holes to line up with the 2a-spec seat belt brackets:
I also offered up the passenger side sill. There is a blob of weld on the underside of the hinge panel stopping it from mating flush - this will get ground off when the bulkhead bits are welded together. As with the other side, adding the sill panel seems to vastly improve the whole look of the side of the truck:
I also started cutting out the two remaining recesses from the dashboard, but managed to chew up a couple of cutting discs and soon ran out completely. Annoying. Decided instead to test hang the various bits to see what needs fettling:
The new discs for the dremel should be here tomorrow, so hopefully I’ll find some time in the evening to finish the recesses and maybe cut out the hole for the steering column. Plan for next weekend is to finish any remaining tweaking of the constituent parts and maybe even get Tony in for welding duties.
That’s it for now,
Andy