engine serial number

Any Land Rover related info can be posted here.
Post Reply
myhalfyFFR
Posts: 25
Joined: Mon Jun 03, 2024 2:58 pm

engine serial number

Post by myhalfyFFR » Wed Aug 20, 2025 11:35 am

Good morning everyone, I have just finished completely overhauling a petrol LR engine, pistons, cylinder liners, valves, clutch, and I have noted the serial number - S 25104260 G – I kindly ask if anyone knows on which LR it was mounted, perhaps on civilian LR, given that my lightweight starts with 237xxxxx.
Thanks
Mauro

User avatar
AR4412
Maître Pâtissier
Posts: 8917
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: engine serial number

Post by AR4412 » Wed Aug 20, 2025 12:01 pm

Hi Mauro,

A 251 engine is a 7:1 petrol engine from a Series IIA. The S prefix denotes that it was a 'Service Exchange ' engine.

Kind regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

myhalfyFFR
Posts: 25
Joined: Mon Jun 03, 2024 2:58 pm

Re: engine serial number

Post by myhalfyFFR » Thu Aug 21, 2025 1:26 pm

Thanks, Neil,
The 251 7:1 engine is designed to use low-octane gasoline, but can I use higher-octane gasoline?
In Italy, there's only one type of unleaded gasoline with an octane rating of 95, which works without any problems for my Halfy engine, which is a 237 8:1. But can this gasoline cause damage to the 251 engine?
Best regards,
Mauro

User avatar
AR4412
Maître Pâtissier
Posts: 8917
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: engine serial number

Post by AR4412 » Thu Aug 21, 2025 3:13 pm

The 7:1 engine will happily run on higher octane fuel, the same as the 8:1 engine. The only thing you may need to do is play with the ignition timing to find it's sweet spot. Was it fitted with hardened valve seats during the rebuild so that it can run happily on unleaded fuel?

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

myhalfyFFR
Posts: 25
Joined: Mon Jun 03, 2024 2:58 pm

Re: engine serial number

Post by myhalfyFFR » Thu Aug 21, 2025 4:05 pm

Thanks, Neil,
The valve seats, valve guides, and valves were supplied and installed by a resurfacing shop, and they now only use products suitable for unleaded gasoline. The shop also resurfaced the cylinder liners, and I did everything else myself: pistons, main bearings, connecting rod bearings, and valve drive shaft. Now I practically have a new engine.
I'm attaching a photo.
Thank you very much.
Best regards,
Mauro
Attachments
engine 2.jpg
engine 2.jpg (65.94 KiB) Viewed 6421 times
engine 1.jpg
engine 1.jpg (66.74 KiB) Viewed 6421 times

User avatar
AR4412
Maître Pâtissier
Posts: 8917
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: engine serial number

Post by AR4412 » Thu Aug 21, 2025 4:08 pm

Ooh. Shiny! We like shiny we do. Shiny, and cake. Mustn't forget the cake.

That's a nice looking engine.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

Post Reply