Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
Gordon Bennett
Maître Pâtissier
Posts: 7422
Joined: Sun Jan 10, 2010 12:21 pm

Re: Monty the rather rusty 2A - 37FG31

Post by Gordon Bennett » Fri Jun 23, 2017 5:33 pm

Hi Andy,

A bit more done 8-)
andrewjsimpson1977 wrote: ↑
Fri Jun 23, 2017 5:04 pm
That's it from me for today - it is a wine and Chinese themed evening in Simpson Hall this evening (I know, that classic combo)
Erm, OK see the irony in the classic combo bit.

But why, how, when, where and with whom did you put together 'Wine & Chinese' :haddock:

Wouldn't happen ooop Norf mate.

Rgds,
Gordon

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Jun 23, 2017 5:49 pm

It was part of the induction ceremony when we became honorary southerners Gordon :D

Gordon Bennett
Maître Pâtissier
Posts: 7422
Joined: Sun Jan 10, 2010 12:21 pm

Re: Monty the rather rusty 2A - 37FG31

Post by Gordon Bennett » Fri Jun 23, 2017 6:23 pm

Bit confused now. After the Overlord Beer-Tent incident, I thought southerners only drank shandy :?

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Jun 23, 2017 6:42 pm

They do, they just call it lager.

Also their sausages are sub-standard, they don't understand the mechanics of good fish and chip production, and they insert 'Rs' in words where they are not welcome.

Unfortunately though, it's notably warmer here so the southerners have clinched it by a whisker 8-)

User avatar
Bob Fell
Cake Guru
Posts: 3044
Joined: Wed Sep 18, 2013 7:17 am
Location: Melton Mowbray

Re: Monty the rather rusty 2A - 37FG31

Post by Bob Fell » Fri Jun 23, 2017 6:51 pm

Gordon Bennett wrote: ↑
Fri Jun 23, 2017 6:23 pm
Bit confused now. After the Overlord Beer-Tent incident, I thought southerners only drank shandy :?
And rear gunners (old wartime phrase).

Sorry, regret I was not party to the said incident.

Regards
Bob
042Bobf


19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: Monty the rather rusty 2A - 37FG31

Post by chipbury » Sat Jun 24, 2017 6:28 am

I've been living south of the M4 for years now and the locals still get confused over dinner/tea times :o
2A - 39 FG 70

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 24, 2017 7:12 am

..made more confusing for the locals, in my case..because I enjoy ALL the teas: afternoon, cup of, the evening meal, cream. Had a cracking cream bun yesterday at the local garden centre. Yum. :D xy :dbday:

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 24, 2017 12:02 pm

I like to think of my new life as missionary work. As in being in the South, on a mission to re-educate in the ways on decent food, proper beer and hot curries :oops:

Gordon Bennett
Maître Pâtissier
Posts: 7422
Joined: Sun Jan 10, 2010 12:21 pm

Re: Monty the rather rusty 2A - 37FG31

Post by Gordon Bennett » Sat Jun 24, 2017 12:30 pm

andrewjsimpson1977 wrote: ↑
Sat Jun 24, 2017 12:02 pm
I like to think of my new life as missionary work. As in being in the South, on a mission to re-educate in the ways on decent food, proper beer and hot curries :oops:
Big job that Andy......

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 24, 2017 4:17 pm

..Well I do like a challenge!

Right so today I promised myself I would do two things:

1) clean up the casing of the steering box

And

2) finish repairing the tub floor

1 is currently in progress, as after a mild acid dip and a scrub, the casing is now in white spirit, to remove a few bits of underseal that some Dr Cackhands in the late 60s saw fit to spray all over it.

2 ... we'll I'm about 50% of my way through the welding. I've come in for a break, a drink and a battery charge as I've been using my portable drill with wire brush to clean off any oxidation before welding. It's slower, and therefore kinder to the aluminium than the equivalent grinder set-up.

Here is the section on the edge of the panel which had completely been eaten away. The brass backer is to act as a heat sink, and a convenient shaper for the liquid aluminium...
IMG_4537.JPG
IMG_4537.JPG (97.63 KiB) Viewed 1441 times
IMG_4538.JPG
IMG_4538.JPG (94.51 KiB) Viewed 1441 times
And here is the same section after basic filling in with the torch, and a light pass over with the flapwheel...
IMG_4539.JPG
IMG_4539.JPG (100.46 KiB) Viewed 1441 times
It still needs more filling, and the edge needs shaping, but I'll get to that later. I'm pleased though, that I've finally found some much more effective settings on the MIG.

I gave the panel a once over with etch primer before I came in. This is more of a confidence booster for me than anything else at the moment, as it has revealed only the bits still needing attention, while making the rest of the panel look much nicer and shiniererer.
IMG_4540.JPG
IMG_4540.JPG (125.16 KiB) Viewed 1441 times
I'll be back out in another hour or so to finish the job off. Then it will be a steering box and a tube of autosol in front of the telly to finish the day off :D

See you in a bit,

Andy

Post Reply