23HF14

Tell us about any of your Land Rover related projects here.
User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: 23HF14

Post by removeduser185 » Fri May 12, 2017 5:58 pm

andrewjsimpson1977 wrote: ↑
Fri May 12, 2017 6:21 am
Lovely pics Fred, and great progress. No need to worry about it still being at the expensive wheelbarrow stage - I'm just jealous that you have wheels on yours at all! And axle straps to boot! Striding ahead of the game.

Neil - I'll pm you but would be able to drop diff with you Sunday if it's any help.

This post has spurred me on to get my own front axle stripped this weekend. If we all keep encouraging each other along like this - we'll have a decent collection to show off at the 50th.

Andy
I don't think I'd have even started without this forum - I was watching Chipbury's and AR4412's restorations, in particular, long before I joined.

Fred

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: 23HF14

Post by removeduser185 » Sat May 13, 2017 11:03 pm

Had a useful few hours in the garage today. Left in charge of the puppy, so dragged his mat out in front of the garage doors, sat him down and got to work while he slept in the sun.

First off, another useful, though small, milestone - got the front springs fitted.
Front springs fitted 13 May 17 small.jpg
Front springs fitted 13 May 17 small.jpg (458.69 KiB) Viewed 1868 times
Then stripped down the rest of the front axle and was really thrilled to find the diff is very good - barely any backlash, teeth like someone from Dallas and no leaks. I will clean it up, paint the outside and stick it on the rear axle out of the way. Steering swivels have clearly been replaced in recent years - not a mark on them and nicely protected by the leather gaiters. The bearings are excellent as well. All the bolts securing the swivels to the axle casing came undone easily - I was having a good day!

Tie rod, not so brilliant - I'll have to go careful removing the TREs as they are rusted solid in the ends. I'm letting them soak overnight in WD40.

And the brake cylinders - my goodness, of the 4 I have now stripped, only one was working properly the others were seized and the colour of the brake fluid... appalling. Still, I have new ones to replace them. Then, a bit of cleaning up of bits in the de-ruster and general workshop fiddling.
Front brake cylinder 2 small.jpg
Front brake cylinder 2 small.jpg (573.69 KiB) Viewed 1868 times
Now, can anyone tell me two things? First, where is the hole for the front axle breather pipe in No2 Cross-member? I can't find it anywhere in the old chassis (I suspect the pipe was loose), but it should be big enough to take a grommet. Secondly, what is the grommet for which is shown in the IPC as being on the breather pipe? It is the same kind of grommet as holds the rear brake pipes on each corner of the spring plate (but less the P-clip). It is not for inserting in the chassis and, I can't see any use for it at all as the pipes don't rub anything anyway as they are attached to the brake line (fixed and flexible). I'd be pleased to know.

Fred

Macvfork
Pastry Chef
Posts: 717
Joined: Sun Aug 17, 2014 3:31 pm
Location: Heathfield, sussex

Re: 23HF14

Post by Macvfork » Sun May 14, 2017 6:11 am

Hi Fred,
Looks like you have had a great day there. Finding you have yourself a great front axle must have been a huge relief and a feeling I can only imagine.
With regard to your query on axle breather pipe and No2 crossmember I can only report that my 73ish project GS had the tube going into the rear face of the NS junction of the cross member in front of the axle. Is that called No2?
Pipe passed through a short grommet much like those in the bulkhead for electric cables.
Have a dig about as mine vanished under a load of hardened under seal.
Hopefully of help.
Mac
Attachments
IMG_4160.JPG
IMG_4160.JPG (3.14 MiB) Viewed 1863 times
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: 23HF14

Post by chipbury » Sun May 14, 2017 6:51 am

That's looking good Fred. You're not far off the rolling chassis stage which is a big milestone in the project.
2A - 39 FG 70

Dickyboy

Re: 23HF14

Post by Dickyboy » Sun May 14, 2017 8:41 am

chipbury wrote: ↑
Sun May 14, 2017 6:51 am
That's looking good Fred. You're not far off the rolling chassis stage which is a big milestone in the project.
I'll second that ,I can remember the feeling when you can roll it around ,keep up the good work

User avatar
Sidders101
Bake Off Judge
Posts: 2406
Joined: Wed Apr 02, 2014 7:57 pm
Location: Winchester

Re: 23HF14

Post by Sidders101 » Sun May 14, 2017 9:30 am

Nice one Fred...you're over the worst and passed the point of no return..the only way is up..gimme a buzz if you need any hard to find bits I have stowed away.
Sidders


1974 Series 3 LWT 12v RHD 69-FM-24 , Royal Marines ("Intrepid")
1976 101 forward control gun tractor 12v RHD- 73-FL-43 ex 1,2 & 3 Para ("Kryten")
1979 Sankey NT Trailer 06-HF-86 78 Engr Reg (Herman)
1978 Trophy Frank Spencer impression (1st place)

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 23HF14

Post by AR4412 » Sun May 14, 2017 10:23 am

Hiya Fred! :D

Good news on the front axle condition mate. :D That makes up for the rear axle problems.

The breather pipe on my front axle was clipped to the rear face of Number 2 crossmember with a double clip shared by the brake pipe. One mine it went from there to a grommet in No2 at the rear ,on the underside between the rear bolt hole for the redundant relay mounting flange and the main chassis rail, where it entered the chassis.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: 23HF14

Post by removeduser185 » Sun May 14, 2017 5:57 pm

Many thanks, to all for the advice. Must go and have a look at my old chassis.

Best

Fred

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 23HF14

Post by AR4412 » Sun May 14, 2017 7:42 pm

Hiya Fred! :D

Andy dropped round today for a quick brew and a natter, great to meet you by the way mate 8-) , so your diff is now safely stored in my garage and one step closer to you.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: 23HF14

Post by andrewjsimpson1977 » Sun May 14, 2017 7:52 pm

Happy to help prove that the forum relay really does work - and very happy to share a brew and a natter Neil. Dangerous info that you live near my favourite Bedford chippy :lol:

Don't think my front axle shows any sign of a breather pipe so I'm interested to learn what you find Fred.

All the best,

Andy

Post Reply