23HF14

Tell us about any of your Land Rover related projects here.
User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 23HF14

Post by AR4412 » Thu Apr 27, 2017 7:22 pm

Hiya Fred! :D

No problem in taking the diff down to Overlord, I will just need to arrange with Andy to get hold of it.

Good to hear you've made progress, not so good to hear that the drill bit melted into the stud and has wrecked the exhaust manifold. :(

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: 23HF14

Post by removeduser185 » Thu May 11, 2017 6:22 pm

I have been a bit quiet of late, the arrival of a new puppy not having helped my ability to get into the garage at will. So, it is time for an update. The most significant development is seeing the new chassis on its rear wheels.
On rear wheels for first time  oblique NS view.jpg
On rear wheels for first time oblique NS view.jpg (501.38 KiB) Viewed 1831 times
I know I would like to have seen it on all four, by now, but life gets in the way.

Of course, I haven’t added the hubs as I am waiting for the new diff which is still with Andy and the Forum Freighters via Overlord Neil and Clive! But, the rest of the rear axle is there now. I was going to add the rear bumperettes and the tow hook until I cut my head on an outrigger as I emerged from torquing the U Bolts - I then realised that the fewer protrusions, the better.

But, while the stripping down of the front axle continues, other bits and pieces get done in parallel. I had a hell of a job separating the inlet and exhaust manifolds and managed to break a stud extractor in the hole when removing broken stud, so ruining the exhaust manifold as I couldn’t get it out. Luckily, the exhaust manifold is considerably cheaper than the inlet! But the edge of the inlet manifold was also damaged a bit, but that was an easy repair with metal-based high-temperature filler. So that has been done.
Inlet manifold being repaired on edge.jpg
Inlet manifold being repaired on edge.jpg (486.22 KiB) Viewed 1831 times
As has a load of cleaning, de-greasing, de-rusting and painting. New TREs are being fiddled with to make sure they fit comfortably in the old tie rods.
Fiddling with tie rods May 17.jpg
Fiddling with tie rods May 17.jpg (471.74 KiB) Viewed 1831 times
You may also notice one of the rear bumperettes. They were in a poor state and I can't get them re-galved, so I have tried out the cold galv paint - looks reasonable and would be perfect, I think were I to paint it all, but i intend to leave the galv bare as much as possible, so I have to make up my mind what to do - at the moment the front side is bare with just the support brackets sprayed - the compromise.

So, the next major job is to finish the front axle and get that fitted,
Front axle being stripped.jpg
Front axle being stripped.jpg (488.74 KiB) Viewed 1831 times
with cleaned and painted wheels and then I want to spray the bulkhead, fit it temporarily to the chassis while I fit it up with axle boxes, loom and so on. I will then remove it and store it while I sort firstly, the rear tub as that will act as the datum for everything else, then the drive train and engine and fit them with the bulkhead off and out of the way. In the meantime there will be brake lines to do, fuel tanks and lines to fit and other smaller jobs. It WILL be ready for the 50th next year! Meanwhile, the garage gets no tidier!

Fred

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 23HF14

Post by AR4412 » Thu May 11, 2017 7:44 pm

Fred wrote: ↑
Thu May 11, 2017 6:22 pm
I haven’t added the hubs as I am waiting for the new diff which is still with Andy and the Forum Freighters via Overlord Neil and Clive! But, the rest of the rear axle is there now. I was going to add the rear bumperettes and the tow hook until I cut my head on an outrigger as I emerged from torquing the U Bolts - I then realised that the fewer protrusions, the better.
Hiya Fred! :D

I hope you haven't taken too big a chunk out of your head mate.

I'd best get my thumb out of my backside and contact Andy to arrange getting the diff off of him. The trouble is that every time I remove my thumb, my admin hits the floor.

Good too see you've got the back end on the ground and some other bits have received attention despite being distracted by a puppy. I always get distracted and find it hard to concetrate on work when puppies are nearby.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

Gordon Bennett
Maître Pâtissier
Posts: 7422
Joined: Sun Jan 10, 2010 12:21 pm

Re: 23HF14

Post by Gordon Bennett » Thu May 11, 2017 7:52 pm

Hi Fred,

Great to see the project starting to take shape.

Have you managed to find a replacement exhaust manifold?

Rgds,
Gordon

Gordon Bennett
Maître Pâtissier
Posts: 7422
Joined: Sun Jan 10, 2010 12:21 pm

Re: 23HF14

Post by Gordon Bennett » Thu May 11, 2017 7:54 pm

AR4412 wrote: ↑
Thu May 11, 2017 7:44 pm
. I always get distracted and find it hard to concetrate on work when puppies are nearby.
Hi Neil,

Plural, hmmm. Know what you mean there ;)

Rgds,
Gordon

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: 23HF14

Post by removeduser185 » Thu May 11, 2017 9:27 pm

Gordon Bennett wrote: ↑
Thu May 11, 2017 7:52 pm
Hi Fred,

Great to see the project starting to take shape.

Have you managed to find a replacement exhaust manifold?

Rgds,
Gordon
Yes, thank you, I bought a new one.
Half shafts and exhaust manifolds.jpg
Half shafts and exhaust manifolds.jpg (419.1 KiB) Viewed 1809 times
. Fortunately the inlet manifold is serviceable. I had to tap a new hole for the heat shield bolt as there was one broken off in the hole fr that, but that was pretty straightforward. Actually, I have been looking back through the photos of the strip down and am amazed just how much which originally looked hopeless has been refurbished successfully. There is still a long way to go, but re-building should be quicker than the stripdown as most things have been cleaned already. A lot will require further coats of paint, certainly, but I'll get there. Many thanks to you all on the forum for the inspiration and advice. I must say, I was taken with the 1 tonnes on the other thread - especially the second one which was pretty original. But I am assured by Frederica that my next project will be a shepherd's hut! I'll endeavour to get some Land Rover bits into it, though!

Fred

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: 23HF14

Post by chipbury » Fri May 12, 2017 5:38 am

Morning Fred,

It's nice when you start to put things on the chassis and it starts looking like a proper vehicle again.
2A - 39 FG 70

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: 23HF14

Post by andrewjsimpson1977 » Fri May 12, 2017 6:21 am

Lovely pics Fred, and great progress. No need to worry about it still being at the expensive wheelbarrow stage - I'm just jealous that you have wheels on yours at all! And axle straps to boot! Striding ahead of the game.

Neil - I'll pm you but would be able to drop diff with you Sunday if it's any help.

This post has spurred me on to get my own front axle stripped this weekend. If we all keep encouraging each other along like this - we'll have a decent collection to show off at the 50th.

Andy

Corporal Punishment
Posts: 40
Joined: Wed Jul 29, 2015 9:42 am
Location: Kidderminster

Re: 23HF14

Post by Corporal Punishment » Fri May 12, 2017 6:44 am

Hi Fred. Do you mind if I ask what wheel and tyre combination you are using? They look like defender wheels? Ed.

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: 23HF14

Post by removeduser185 » Fri May 12, 2017 5:56 pm

Corporal Punishment wrote: ↑
Fri May 12, 2017 6:44 am
Hi Fred. Do you mind if I ask what wheel and tyre combination you are using? They look like defender wheels? Ed.
That's a good question. I don't know. The vehicle has been in private hands now for nearly 20 years, so anything can have happened in that time. The only thing I can guarantee is original will be the chassis (and now I have swapped that) as everything else is replaceable. The tyres I know aren't correct as they are modern 7.50x16 Michelins. And they certainly don't look right - they alter the entire look of the vehicle, I think which is a shame. I would like to replace them with 6.50x16 STA Traxion Vintage tyres, but they would set me back £874 for a set and, with the Michelins being nearly new, that is hard to justify, just at the moment. I think I'd even rather 6.00x16s like civilian SWB Land Rovers, but, they're not much easier to find.

As for the rims, certainly they are ex-military because they have FV numbers stamped to their front faces, but that doesn't mean much - they could have come off any military Land Rover (OK - except the 1 Tonne!) I don''t think they are a set, because the two I have stripped down so far had different layers of paint on them!

Fred

Post Reply