Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sun Jun 07, 2020 3:22 pm

Are the two top centre of the pic, the ones that hold the steering box stiffener bracket to the footwell?

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sun Jun 07, 2020 3:32 pm

The two in the centre might be a bit large for the stiffener, hard to tell from the pic. The others look like the captive plates used to fit civi seat runners.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 07, 2020 3:44 pm

AR4412 wrote: ↑
Sun Jun 07, 2020 3:32 pm
The two in the centre might be a bit large for the stiffener, hard to tell from the pic. The others look like the captive plates used to fit civi seat runners.

Regards,
You’ve helped me get there with some of them.. you’re right the centre top are too large bolts and too far apart to be for the stiffener. In fact the left hand ones fit that place perfectly. I had though until now that it was just nuts and bolts in that spot- makes so much more sense as captive bolts, given what a pain in the harris it was to reach around the footwell to hold a spanner on the nut while I socketed the other end. D’oh!

Slightly confused as to why I have five of them, but then some may have arrived in a previous job lot of parts I suppose - and may be unrelated to the lightweight.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sun Jun 07, 2020 4:23 pm

I had a look through my list of parts I have bought, and I had made an annotation next to 330908 Boltplate, Stiffener, of 395064 and MRC5509. When I looked in the civi parts list they come up as used for both the stiffener and the front seat rails, with MRC5509 being the metric version.

I can't think of anywhere on the lightweight that uses a captive stud plate apart from on the steering box stiffener bracket.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 07, 2020 4:58 pm

AR4412 wrote: ↑
Sun Jun 07, 2020 4:23 pm
I had a look through my list of parts I have bought, and I had made an annotation next to 330908 Boltplate, Stiffener, of 395064 and MRC5509. When I looked in the civi parts list they come up as used for both the stiffener and the front seat rails, with MRC5509 being the metric version.

I can't think of anywhere on the lightweight that uses a captive stud plate apart from on the steering box stiffener bracket.

Regards,
So that’s it then - I must have just acquired them along the way at some point. Thanks Neil. At least I learned about the seat back and stiffener ones - and have also realised that I need to get two more of the upper tub mounting ones, as my old dog ears have the hole patten for them - the replacement panels just had the central bolt holes but not the holes for the two rivets. Good job I never throw anything away!

Thanks again everyone - really helpful.

All the best,

Andy

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon Jun 08, 2020 7:08 pm

The replacement door bottom arrived today. The fit is good, although the bulkhead needs to be pushed forward a fraction at the top, and the hinges could do with a bit of an adjust..

EE51B881-969B-41C4-9672-4EF88B5FC8E8.jpeg
EE51B881-969B-41C4-9672-4EF88B5FC8E8.jpeg (1.55 MiB) Viewed 2131 times
7E9F30F4-5219-4330-A6C1-C062C8936726.jpeg
7E9F30F4-5219-4330-A6C1-C062C8936726.jpeg (1.57 MiB) Viewed 2131 times
E728127E-29C8-4665-AF23-4BA5E4C7DC5A.jpeg
E728127E-29C8-4665-AF23-4BA5E4C7DC5A.jpeg (1.23 MiB) Viewed 2131 times
FA72A7EC-3CA6-457A-B34F-52558C47D8F9.jpeg
FA72A7EC-3CA6-457A-B34F-52558C47D8F9.jpeg (1.34 MiB) Viewed 2131 times
No one seems to have any near side doors at the moment, so maybe I’ll re-skin the old frame.. I have it clamped up in the garage awaiting a repair section being welded in. Will see what the weather is like tomorrow.

I also found the one remaining square tube bracket seatbelt mount thingy, and with the help of my trusty blowtorch, managed to remove the old eye bolt. The bolt is fubared, but the bracket just needed a couple of gouges welding up, and a soak in the derusting cauldron. I’ll give it a decent coat of zinc primer in the morning and will try to remember to order it a friend for the other side.

All the best,

Andy

All the best,

Andy

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Mon Jun 08, 2020 7:45 pm

Hiya Andy! :D ,

Another piece of the puzzle slots into place mate. 8-)

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Mon Jun 08, 2020 10:29 pm

andrewjsimpson1977 wrote: ↑
Mon Jun 08, 2020 7:08 pm
square tube bracket seatbelt mount thingy, and with the help of my trusty blowtorch, managed to remove the old eye bolt. The bolt is fubared, but the bracket just needed a couple of gouges welding up, and a soak in the derusting cauldron. will try to remember to order it a friend for the other side.
I made my own out of a piece of 1" square tube. I still have some left if you want to make one. You just need to weld in the lump of metal the eye-bolt is screwed into and that's easy enough. Will you be using your eye-bolts for the seatbelts? With the Series 3, the eye-bolts are there, but later seatbelts don't need them - they simply screw direct into the hole as there are no "D" shackles. So, if you need a pair, I can let you have mine.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Tue Jun 09, 2020 6:54 am

Fred wrote: ↑
Mon Jun 08, 2020 10:29 pm
andrewjsimpson1977 wrote: ↑
Mon Jun 08, 2020 7:08 pm
square tube bracket seatbelt mount thingy, and with the help of my trusty blowtorch, managed to remove the old eye bolt. The bolt is fubared, but the bracket just needed a couple of gouges welding up, and a soak in the derusting cauldron. will try to remember to order it a friend for the other side.
I made my own out of a piece of 1" square tube. I still have some left if you want to make one. You just need to weld in the lump of metal the eye-bolt is screwed into and that's easy enough. Will you be using your eye-bolts for the seatbelts? With the Series 3, the eye-bolts are there, but later seatbelts don't need them - they simply screw direct into the hole as there are no "D" shackles. So, if you need a pair, I can let you have mine.
If you really don’t need them I would be grateful for them Fred - I currently have one, and am bidding on two more at the moment. Would be nice to get somewhere near a full set.

Andy

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Tue Jun 09, 2020 8:54 am

..also like the square tube idea Fred - and agree it should be easy to zap one together. I’ve found my welding has improved a lot on smaller / finer parts by simply dropping down to 0.8 wire from the usual 0.9 - turns out (and it now seems obvious in hindsight) the thicker wire carries more current to the point of arc, and as such more heat and more blow-throughs.

Post Reply