Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Jun 12, 2020 8:50 pm

landylees wrote: ↑
Fri Jun 12, 2020 8:14 pm
andrewjsimpson1977 wrote: ↑
Fri Jun 12, 2020 7:58 pm
Seeing as Howard ‘the hard taskmaster’ Lees is in foreman mode.. here’s today’s minimum contribution...


B971A193-E061-468F-8AAA-7F1316B725DD.jpeg


Painted in anti-rust primer, then high zinc topcoat. If they don’t outlive me, there is no justice in this world.

Andy
I just like pictures! (as well as checking that you are not catching up).

My wife laughed at the photo of the parts dangling from the light and said "is he separated or divorced?". The irony was not lost on me since 10 minutes earlier I had been told to move the Lightweight bonnet off the dining room table and back into the garage. It has since crept back onto the dining room table since this room is rarely used and there is more free space in there than in the garage.
The worrying thing about the womenfolk is their power to see the future :lol:

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 13, 2020 7:32 pm

Well today Howard and I proved we are typical IT project managers and failed to agree on something simple like where to get our galv parts blasted. To be fair to Howard I was being ultra northern about the price. It did however prompt me to sort all the galvy bits out and make some repairs in case a drop off at blasters becomes imminent.

I still have some grinding to do in the morning on the drivers side front bumperette, but other than that it’s all ready to go.

D802E6AA-08BA-4EA7-808C-B3CBDD6BFD77.jpeg
D802E6AA-08BA-4EA7-808C-B3CBDD6BFD77.jpeg (2.38 MiB) Viewed 2127 times

39EF2902-EBF7-4462-826E-CAD6A68447D6.jpeg
39EF2902-EBF7-4462-826E-CAD6A68447D6.jpeg (2.47 MiB) Viewed 2127 times

Just need to drag the rear bench seat frames out of the..

9F971B9F-3964-4AF0-8175-0014058492E4.jpeg
9F971B9F-3964-4AF0-8175-0014058492E4.jpeg (2.44 MiB) Viewed 2127 times

..wait...what’s that..?!?

259B9693-697C-42CA-BD7C-3767C48B44BB.jpeg
259B9693-697C-42CA-BD7C-3767C48B44BB.jpeg (1.83 MiB) Viewed 2127 times

..RUN FOR YOUR LIVES!!! Women and Andys first!
Last edited by andrewjsimpson1977 on Sat Jun 13, 2020 7:42 pm, edited 1 time in total.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 13, 2020 7:42 pm

I’m assuming that’s some sort of mutant alien species here to spread its Covid-19 further around the human race. Well I’m on to you spider! A few swift and very manly kicks of the frame across the yard (you had to be there, I was impressive) and it scuttled back off to its lair / my spare shed full of crap (note to self: burn the shed). Then Neil messaged me assuring me that it would return to get me in the night, because y’know..he’s a mate like that.


Next I unbolted the upper tub sides, and removed the rear number plate bracket and three of the tailgate pieces (one will be replaced) so they could be paint strippered..

16D39883-900A-47B0-83B9-4CDD265715C1.jpeg
16D39883-900A-47B0-83B9-4CDD265715C1.jpeg (1.67 MiB) Viewed 2125 times
56F6DBBD-9E26-4754-9844-FD1C797A4BA1.jpeg
56F6DBBD-9E26-4754-9844-FD1C797A4BA1.jpeg (2.08 MiB) Viewed 2125 times

..and while that they sat slathered in toxic goo, I finished cleaning up the under-arch tool box body and got it into primer..

DE6D61C7-56C9-42B4-927F-A70B29AFA09B.jpeg
DE6D61C7-56C9-42B4-927F-A70B29AFA09B.jpeg (1.04 MiB) Viewed 2125 times

..it was then hung up with its friends in the place that is traditional..


D1E490BC-74AB-4259-84E0-29940B654AD0.jpeg
D1E490BC-74AB-4259-84E0-29940B654AD0.jpeg (828.27 KiB) Viewed 2125 times

That’s it for today. Tomorrow more paint stripping ahead of taking the upper tub sides and tailgate to have cracks welded and one new tailgate panel folded up.

Beer time,

Andy

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sat Jun 13, 2020 8:00 pm

That's not a spider mate. That's a monkey nut with legs.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 13, 2020 8:25 pm

AR4412 wrote: ↑
Sat Jun 13, 2020 8:00 pm
That's not a spider mate. That's a monkey nut with legs.

Regards,
It looked a bit handy Neil.. and I’m pretty sure it had a knife. I was tempted just to throw the bench on the bonfire but then again I wasn’t convinced that 8 legged monstrosity would burn.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 14, 2020 5:41 pm

Today was about stripping down the body parts for ally welding and painting..


The tub was off to have its floor glued, bolted and riveted down for what will hopefully be the next 52 years..

E5238A68-8E2A-4763-BB47-B61D461AB826.jpeg
E5238A68-8E2A-4763-BB47-B61D461AB826.jpeg (1.39 MiB) Viewed 2078 times
ADAEFDD9-C278-4893-99A2-DE8D936F444C.jpeg
ADAEFDD9-C278-4893-99A2-DE8D936F444C.jpeg (1.63 MiB) Viewed 2078 times

FC092680-D9C2-4423-9347-869C2F54C9AB.jpeg
FC092680-D9C2-4423-9347-869C2F54C9AB.jpeg (1.22 MiB) Viewed 2078 times

17F1CFA0-207A-424B-BC22-0BE386BAC80F.jpeg
17F1CFA0-207A-424B-BC22-0BE386BAC80F.jpeg (1.25 MiB) Viewed 2078 times

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 14, 2020 5:44 pm

The dash fascia was also tiger sealed. Next week begins the big sand down before paint.

I’m going to go enjoy this lovely evening we seem to be having out of the blue.. so good day to you!

Andy

landylees
Pastry Chef
Posts: 639
Joined: Mon Jan 29, 2018 8:43 pm
Location: Bishops Stortford

Re: Monty the rather rusty 2A - 37FG31

Post by landylees » Sun Jun 14, 2020 11:21 pm

You're certainly getting there. Don't forget the holes on the left tub side for the upper tub fixings and maybe a wiring grommet where the wiring loom comes out of the chassis?
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon Jun 15, 2020 10:46 am

landylees wrote: ↑
Sun Jun 14, 2020 11:21 pm
You're certainly getting there. Don't forget the holes on the left tub side for the upper tub fixings and maybe a wiring grommet where the wiring loom comes out of the chassis?
I have the grommets - the holes for the tub side for the fixing s yes that’s on the list, along with the ones for the tie downs on the side face of the replacement u-channel. I’ve used some of the tie downs to clamp the floor down while the tiger seal goes off.. this week I’m going to finish the bulkhead repairs s on your suggestion I want it in green paint and wearing its loom.

This week will give me chance to go over the chassis and fit any remaining clips, touch in the chassis paint when it has peeled in a couple of spots, and generally tidy things up.

I don’t really understand the wiring and pipe clips layout yet - as mine was just a mess of previous bodges when I got it, so a few questions:

1) The two holes (one either side) in the seat box end panels - do they hold clips for the fuel tank wiring?

2) The fuel lines layout - do you have a photo of yours while the body is off? I need to know where the double and single clips go.

3) There was a wiring clip at the base of my battery plinth, on the rear inside leg about 2 inches up from the bottom. It’s too small I think to be for a battery cable - is it for the horn leads? No corresponding hole exists yet on my Richards chassis, but as the original tools to be a legitimate stamped hole, I’ll replicate it if I can figure out what it’s for.

All the best,

Andy

Thanks in advance,

Andy

landylees
Pastry Chef
Posts: 639
Joined: Mon Jan 29, 2018 8:43 pm
Location: Bishops Stortford

Re: Monty the rather rusty 2A - 37FG31

Post by landylees » Mon Jun 15, 2020 11:27 am

Mine was also a bit of a bodge having had a V8 in it and generally being mis-treated.

1) the two holes in the seat box side are for rubbers to stop the doors hitting the seat box sides - very posh!
2) I will take a picture of mine but can't guarantee they are correct - I loosely modelled off my S3 FFR
3) when I had mine the solenoid was screwed to one of the legs, but I have since relocated to the correct place on the bulkhead. I have no other reference points for this as on my FFR the batteries are in the rear wheel arches
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]

Post Reply