The worrying thing about the womenfolk is their power to see the futurelandylees wrote: ↑Fri Jun 12, 2020 8:14 pmI just like pictures! (as well as checking that you are not catching up).andrewjsimpson1977 wrote: ↑Fri Jun 12, 2020 7:58 pmSeeing as Howard ‘the hard taskmaster’ Lees is in foreman mode.. here’s today’s minimum contribution...
B971A193-E061-468F-8AAA-7F1316B725DD.jpeg
Painted in anti-rust primer, then high zinc topcoat. If they don’t outlive me, there is no justice in this world.
Andy
My wife laughed at the photo of the parts dangling from the light and said "is he separated or divorced?". The irony was not lost on me since 10 minutes earlier I had been told to move the Lightweight bonnet off the dining room table and back into the garage. It has since crept back onto the dining room table since this room is rarely used and there is more free space in there than in the garage.
Monty the rather rusty 2A - 37FG31
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Well today Howard and I proved we are typical IT project managers and failed to agree on something simple like where to get our galv parts blasted. To be fair to Howard I was being ultra northern about the price. It did however prompt me to sort all the galvy bits out and make some repairs in case a drop off at blasters becomes imminent.
I still have some grinding to do in the morning on the drivers side front bumperette, but other than that it’s all ready to go.
Just need to drag the rear bench seat frames out of the..
..wait...what’s that..?!?
..RUN FOR YOUR LIVES!!! Women and Andys first!
I still have some grinding to do in the morning on the drivers side front bumperette, but other than that it’s all ready to go.
Just need to drag the rear bench seat frames out of the..
..wait...what’s that..?!?
..RUN FOR YOUR LIVES!!! Women and Andys first!
Last edited by andrewjsimpson1977 on Sat Jun 13, 2020 7:42 pm, edited 1 time in total.
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
I’m assuming that’s some sort of mutant alien species here to spread its Covid-19 further around the human race. Well I’m on to you spider! A few swift and very manly kicks of the frame across the yard (you had to be there, I was impressive) and it scuttled back off to its lair / my spare shed full of crap (note to self: burn the shed). Then Neil messaged me assuring me that it would return to get me in the night, because y’know..he’s a mate like that.
Next I unbolted the upper tub sides, and removed the rear number plate bracket and three of the tailgate pieces (one will be replaced) so they could be paint strippered..
..and while that they sat slathered in toxic goo, I finished cleaning up the under-arch tool box body and got it into primer..
..it was then hung up with its friends in the place that is traditional..
That’s it for today. Tomorrow more paint stripping ahead of taking the upper tub sides and tailgate to have cracks welded and one new tailgate panel folded up.
Beer time,
Andy
Next I unbolted the upper tub sides, and removed the rear number plate bracket and three of the tailgate pieces (one will be replaced) so they could be paint strippered..
..and while that they sat slathered in toxic goo, I finished cleaning up the under-arch tool box body and got it into primer..
..it was then hung up with its friends in the place that is traditional..
That’s it for today. Tomorrow more paint stripping ahead of taking the upper tub sides and tailgate to have cracks welded and one new tailgate panel folded up.
Beer time,
Andy
Re: Monty the rather rusty 2A - 37FG31
That's not a spider mate. That's a monkey nut with legs.
Regards,
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Today was about stripping down the body parts for ally welding and painting..
The tub was off to have its floor glued, bolted and riveted down for what will hopefully be the next 52 years..
The tub was off to have its floor glued, bolted and riveted down for what will hopefully be the next 52 years..
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
The dash fascia was also tiger sealed. Next week begins the big sand down before paint.
I’m going to go enjoy this lovely evening we seem to be having out of the blue.. so good day to you!
Andy
I’m going to go enjoy this lovely evening we seem to be having out of the blue.. so good day to you!
Andy
Re: Monty the rather rusty 2A - 37FG31
You're certainly getting there. Don't forget the holes on the left tub side for the upper tub fixings and maybe a wiring grommet where the wiring loom comes out of the chassis?
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
I have the grommets - the holes for the tub side for the fixing s yes that’s on the list, along with the ones for the tie downs on the side face of the replacement u-channel. I’ve used some of the tie downs to clamp the floor down while the tiger seal goes off.. this week I’m going to finish the bulkhead repairs s on your suggestion I want it in green paint and wearing its loom.
This week will give me chance to go over the chassis and fit any remaining clips, touch in the chassis paint when it has peeled in a couple of spots, and generally tidy things up.
I don’t really understand the wiring and pipe clips layout yet - as mine was just a mess of previous bodges when I got it, so a few questions:
1) The two holes (one either side) in the seat box end panels - do they hold clips for the fuel tank wiring?
2) The fuel lines layout - do you have a photo of yours while the body is off? I need to know where the double and single clips go.
3) There was a wiring clip at the base of my battery plinth, on the rear inside leg about 2 inches up from the bottom. It’s too small I think to be for a battery cable - is it for the horn leads? No corresponding hole exists yet on my Richards chassis, but as the original tools to be a legitimate stamped hole, I’ll replicate it if I can figure out what it’s for.
All the best,
Andy
Thanks in advance,
Andy
Re: Monty the rather rusty 2A - 37FG31
Mine was also a bit of a bodge having had a V8 in it and generally being mis-treated.
1) the two holes in the seat box side are for rubbers to stop the doors hitting the seat box sides - very posh!
2) I will take a picture of mine but can't guarantee they are correct - I loosely modelled off my S3 FFR
3) when I had mine the solenoid was screwed to one of the legs, but I have since relocated to the correct place on the bulkhead. I have no other reference points for this as on my FFR the batteries are in the rear wheel arches
1) the two holes in the seat box side are for rubbers to stop the doors hitting the seat box sides - very posh!
2) I will take a picture of mine but can't guarantee they are correct - I loosely modelled off my S3 FFR
3) when I had mine the solenoid was screwed to one of the legs, but I have since relocated to the correct place on the bulkhead. I have no other reference points for this as on my FFR the batteries are in the rear wheel arches
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]