Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sun May 17, 2020 7:52 pm

Hiya Andy!

Good to see you back on the project mate. And so relieved that the holes I measured came out in the right place on your bulkhead.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sun May 17, 2020 8:07 pm

Fred wrote: ↑
Sun May 17, 2020 6:37 pm
today I spent a very fruitless afternoon, trying to open Freda's Freelander tailgate. It's jammed shut. The electrics work, the window does its wind-down stuff, the other doors work on the central locking, but not the tailgate. And... the best bit of advice on a Freelander forum is that - to free the lock you need to open the door! Brilliant. I wish I'd thought of that.
Hiya Fred! :D ,

If the window drops down that inch it does when you go to open the tailgate then the switch and wiring should be okay, which leaves a failed solenoid or catch. You can just get the screws out of the bottom of the F1's doorcard with it shut to allow you to pull the doorcard off and get in there. Once the moisture/vapour seal is out of the way, or a hole cut in it, you can manually open the lock. Not had to do one for a good few years now.

The video in this link shows what's inside the rear door so that you can see what's there and aren't going in blind.

https://www.youtube.com/watch?v=3ImvQsayuJg

HTH.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Sun May 17, 2020 9:25 pm

Many thanks, Neil. I've had a look at the video and I'll have another go tomorrow - the difficulty, it seems to me is getting the bottom screws undone to release the doorcard.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun May 17, 2020 9:50 pm

Fred wrote: ↑
Sun May 17, 2020 9:25 pm
Many thanks, Neil. I've had a look at the video and I'll have another go tomorrow - the difficulty, it seems to me is getting the bottom screws undone to release the doorcard.
Ooh look at you showing off with your fancy door cards...

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Sun May 17, 2020 10:03 pm

andrewjsimpson1977 wrote: ↑
Sun May 17, 2020 9:50 pm
Fred wrote: ↑
Sun May 17, 2020 9:25 pm
Many thanks, Neil. I've had a look at the video and I'll have another go tomorrow - the difficulty, it seems to me is getting the bottom screws undone to release the doorcard.
Ooh look at you showing off with your fancy door cards...
And it's got an ECU!

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun May 17, 2020 10:20 pm

14587B2D-BBFC-4BB7-BD66-33E7A01404CA.jpeg
14587B2D-BBFC-4BB7-BD66-33E7A01404CA.jpeg (145.82 KiB) Viewed 1952 times

diffwhine
Posts: 389
Joined: Sun Feb 25, 2018 9:28 pm

Re: Monty the rather rusty 2A - 37FG31

Post by diffwhine » Mon May 18, 2020 5:41 pm

Is it a 3 door Freelander with the removable hardback? If it is, there is a possibility the microswitch has failed. The switch inhibits the rear door glass when the roof is off although I seem to remember that it defaults to the open position.
Chances are though that its the regulator which has died a death. Its cable operated and is very good at tying itself up in knots.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon May 18, 2020 8:09 pm

A bit more tinkerage today, though not much really to speak of. I started sanding the bulkhead back to bare metal, resolving surface issues and grinding welds as I went. I’ve got about a third of it back to bare metal, cleaned and degreased and coated in zinc rich primer. There’s a thunderstorm forecast for Thursday apparently, so I’d better get my skates on if I want to finish this task outside In the sunshine. Should be enough time to finish the repairs and get it all undercoated, fingers crossed.

74D528D6-452C-4064-8DB2-A506B212888E.jpeg
74D528D6-452C-4064-8DB2-A506B212888E.jpeg (1.61 MiB) Viewed 1918 times
FAE14FF6-2409-4640-A85F-7AC2EC9B548E.jpeg
FAE14FF6-2409-4640-A85F-7AC2EC9B548E.jpeg (1 MiB) Viewed 1918 times
0E5A32F4-684B-44D1-884F-9381582BB301.jpeg
0E5A32F4-684B-44D1-884F-9381582BB301.jpeg (1.13 MiB) Viewed 1918 times

Ignore the over spray on the bulkhead outrigger, it will be getting another coat of black before final assembly.


All the best,

Andy

landylees
Pastry Chef
Posts: 639
Joined: Mon Jan 29, 2018 8:43 pm
Location: Bishops Stortford

Re: Monty the rather rusty 2A - 37FG31

Post by landylees » Mon May 18, 2020 10:31 pm

You've certainly fired back up! I'd better get my skates on...
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Tue May 19, 2020 6:07 pm

landylees wrote: ↑
Mon May 18, 2020 10:31 pm
You've certainly fired back up! I'd better get my skates on...
Remain calm buddy, there’s plenty to be done yet. I did manage a bit of a fiddle on my lunch, as the fitting kit for the NATO hook arrived (minus the u-shaped adapter plate for the 2a version, which is now on order from Blanchards). A test fitting seems pointless, but it got me out of the house for ten minutes..

47795EC7-4BC3-4A1D-A080-ACE2FAC923B7.jpeg
47795EC7-4BC3-4A1D-A080-ACE2FAC923B7.jpeg (1.39 MiB) Viewed 1892 times

Tomorrow I’ll rescue the other rear bumperette from the old crossmember, and hopefully some more cleaning up of the bulkhead. If I’m feeling particularly brave I might even break out the welder.

All the best,

Andy

Post Reply