19HF27

Tell us about any of your Land Rover related projects here.
User avatar
Bob Fell
Cake Guru
Posts: 3044
Joined: Wed Sep 18, 2013 7:17 am
Location: Melton Mowbray

Re: 19HF27

Post by Bob Fell » Sat Apr 04, 2020 4:09 pm

And finally fitted the O/S mirror to complete that little project.
I make no apology for the gratuitous mirror pics as I'm over the moon with the result :D ;
009.JPG
009.JPG (152.53 KiB) Viewed 2407 times
010.JPG
010.JPG (152.32 KiB) Viewed 2407 times
011.JPG
011.JPG (162.21 KiB) Viewed 2407 times
Regards
Bob
042Bobf


19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.

landylees
Pastry Chef
Posts: 639
Joined: Mon Jan 29, 2018 8:43 pm
Location: Bishops Stortford

Re: 19HF27

Post by landylees » Sat Apr 04, 2020 11:21 pm

Looks great!
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]

User avatar
Bob Fell
Cake Guru
Posts: 3044
Joined: Wed Sep 18, 2013 7:17 am
Location: Melton Mowbray

Re: 19HF27

Post by Bob Fell » Mon Apr 06, 2020 5:45 pm

Today started unbolting the tub top panels, the nut plates have been removing themselves as the rivets are rotted off.
What I have found and didn't know is that the nut plates are cranked and the gaps were filled with a white, hard putty which initially through me into a panic thinking it was the dreaded corrosion of doom, but no, once cleaned up there was no corrosion at all :D. With regards to the putty, I've come across this before with evidence it was used as a sealant on the Sankey hub ends and also one of the drive end plates when I replaced the rear hub oil seals. I believe it maybe boss white? The first pic shows traces of it on one of the plate;
006.jpg
006.jpg (3.81 MiB) Viewed 2373 times
Anyway, the two plates I have removed have cleaned up a treat;
007.jpg
007.jpg (167.68 KiB) Viewed 2373 times
More tomorrow.
Bob
042Bobf


19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.

User avatar
Bob Fell
Cake Guru
Posts: 3044
Joined: Wed Sep 18, 2013 7:17 am
Location: Melton Mowbray

Re: 19HF27

Post by Bob Fell » Tue Apr 07, 2020 7:00 pm

Lots done today with the lovely weather;
002.jpg
002.jpg (3.68 MiB) Viewed 2338 times
003.jpg
003.jpg (3.24 MiB) Viewed 2338 times
Well that's a couple of gratuitous pics out the way, here's the end result of today's work;
005.jpg
005.jpg (2.54 MiB) Viewed 2338 times
006.jpg
006.jpg (2.97 MiB) Viewed 2338 times
Every thing went well, the black is etch primer from Fascinating Finishes military range, brilliant stuff as it goes these days but not to the standard of yellow chromate aka
Alodine of the old days.
042Bobf


19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.

User avatar
Bob Fell
Cake Guru
Posts: 3044
Joined: Wed Sep 18, 2013 7:17 am
Location: Melton Mowbray

Re: 19HF27

Post by Bob Fell » Tue Apr 07, 2020 7:15 pm

Following on;
007.jpg
007.jpg (2.99 MiB) Viewed 2336 times
008.jpg
008.jpg (2.63 MiB) Viewed 2336 times
Now, advice required, as said there is some minor surface aluminum rot which I have cleaned of as best as you can in what can only be the most inaccessible area of all on these vehicles;
009.jpg
009.jpg (3.37 MiB) Viewed 2336 times

What is the best treatment/paint from here before refitting the nut plates? I'm thinking of using HIPS as a gasket possibly between the nut plates and tub. Any advice welcome.
Cheers
Bob
042Bobf


19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.

landylees
Pastry Chef
Posts: 639
Joined: Mon Jan 29, 2018 8:43 pm
Location: Bishops Stortford

Re: 19HF27

Post by landylees » Tue Apr 07, 2020 9:06 pm

I'm putting mine back together with Duralac inbetween the different metals.

https://www.amazon.co.uk/Duralac-Anti-C ... B00LB6EUEO
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: 19HF27

Post by removeduser185 » Tue Apr 07, 2020 9:09 pm

I used a coat of the resin you use with fibreglass. It seems to be tough and suitably insulating.

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: 19HF27

Post by Loulou » Wed Apr 08, 2020 6:24 am

Waa!

A very beautiful LWT AND its radio module.
All my respectful congratulations dear Bob for the job accomplished; It's amazing !

Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

User avatar
Bob Fell
Cake Guru
Posts: 3044
Joined: Wed Sep 18, 2013 7:17 am
Location: Melton Mowbray

Re: 19HF27

Post by Bob Fell » Wed Apr 08, 2020 10:33 am

Thanks all for the advice, I'm thinking Duralac is the way to go.
Now, I'm after an air riveter, can any one recommend any particular make/model they have found reliable???
There are shed loads out there and I wouldn't touch a cheap one so I would appreciate experiences before I wade in.
I've used a Draper before and that was excellent but unfortunately not available to me anymore.

Regards
Bob
042Bobf


19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: 19HF27

Post by Loulou » Wed Apr 08, 2020 3:01 pm

I repainted the nut plates with bi-component polyurethane paint, the tub also.
Then a flexible polyurethane sealant between the two during assembly and finally a nice layer of grease (semi-trailer sole of quarries) on top.

For the rivet pliers, I tested an air-compressed model once: it is brutal (in my opinion) and I scratched the paint when the nail broke while sliding.
I now use this manual pliers with large levers (better control) and it is perfect with waterproof aluminum + aluminum rivets.
The head is a little big and sometimes difficult to put in place.
pop-manu.png
pop-manu.png (267.06 KiB) Viewed 2281 times
Hoping to have helped

Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

Post Reply