Monty the rather rusty 2A - 37FG31
Re: Monty the rather rusty 2A - 37FG31
Hiya Andy!
Good to see you back on the project mate. And so relieved that the holes I measured came out in the right place on your bulkhead.
Regards,
Good to see you back on the project mate. And so relieved that the holes I measured came out in the right place on your bulkhead.
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
Re: Monty the rather rusty 2A - 37FG31
Hiya Fred!Fred wrote: ↑Sun May 17, 2020 6:37 pmtoday I spent a very fruitless afternoon, trying to open Freda's Freelander tailgate. It's jammed shut. The electrics work, the window does its wind-down stuff, the other doors work on the central locking, but not the tailgate. And... the best bit of advice on a Freelander forum is that - to free the lock you need to open the door! Brilliant. I wish I'd thought of that.
If the window drops down that inch it does when you go to open the tailgate then the switch and wiring should be okay, which leaves a failed solenoid or catch. You can just get the screws out of the bottom of the F1's doorcard with it shut to allow you to pull the doorcard off and get in there. Once the moisture/vapour seal is out of the way, or a hole cut in it, you can manually open the lock. Not had to do one for a good few years now.
The video in this link shows what's inside the rear door so that you can see what's there and aren't going in blind.
https://www.youtube.com/watch?v=3ImvQsayuJg
HTH.
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: Monty the rather rusty 2A - 37FG31
Many thanks, Neil. I've had a look at the video and I'll have another go tomorrow - the difficulty, it seems to me is getting the bottom screws undone to release the doorcard.
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: Monty the rather rusty 2A - 37FG31
And it's got an ECU!andrewjsimpson1977 wrote: ↑Sun May 17, 2020 9:50 pmOoh look at you showing off with your fancy door cards...
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Is it a 3 door Freelander with the removable hardback? If it is, there is a possibility the microswitch has failed. The switch inhibits the rear door glass when the roof is off although I seem to remember that it defaults to the open position.
Chances are though that its the regulator which has died a death. Its cable operated and is very good at tying itself up in knots.
Chances are though that its the regulator which has died a death. Its cable operated and is very good at tying itself up in knots.
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
A bit more tinkerage today, though not much really to speak of. I started sanding the bulkhead back to bare metal, resolving surface issues and grinding welds as I went. I’ve got about a third of it back to bare metal, cleaned and degreased and coated in zinc rich primer. There’s a thunderstorm forecast for Thursday apparently, so I’d better get my skates on if I want to finish this task outside In the sunshine. Should be enough time to finish the repairs and get it all undercoated, fingers crossed.
Ignore the over spray on the bulkhead outrigger, it will be getting another coat of black before final assembly.
All the best,
Andy
Ignore the over spray on the bulkhead outrigger, it will be getting another coat of black before final assembly.
All the best,
Andy
Re: Monty the rather rusty 2A - 37FG31
You've certainly fired back up! I'd better get my skates on...
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Remain calm buddy, there’s plenty to be done yet. I did manage a bit of a fiddle on my lunch, as the fitting kit for the NATO hook arrived (minus the u-shaped adapter plate for the 2a version, which is now on order from Blanchards). A test fitting seems pointless, but it got me out of the house for ten minutes..
Tomorrow I’ll rescue the other rear bumperette from the old crossmember, and hopefully some more cleaning up of the bulkhead. If I’m feeling particularly brave I might even break out the welder.
All the best,
Andy