Monty the rather rusty 2A - 37FG31
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: Monty the rather rusty 2A - 37FG31
Welcome back, Andy. I put this here so you don't have to hunt for your thread and can crack on with the pictures! 
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
A most thoughtful hint Fred
I’ll be wheeling the old boy out into the sunshine later in the week, for a really good clean up and some tinkering. Scouts honour.
Re: Monty the rather rusty 2A - 37FG31
That is great news Andy.
No pressure...
Mac
No pressure...
Mac
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Haha almost sinister their Mac
So this evening I roughly assembled most of the bits and pushed the landy outside to admire the fine layer of dust that has accumulated on it since last I wielded spanner in anger. Ok it’s not as bad as I remember, but there’s clearly a lot of work to do.
Plan for this weekend is to tinker with what is done already: have a good clean up and assess of the immediate jobs, and do some lining up. It’s clear that the radiator panel needs its rubber pads fitting to lift the front so the wings line up with the bulkhead tabs properly. I also think from trying to line up the sills, that the bulkhead needs at least one washer adding each side on the main mounting bolts.
I have a brand new box of sanding discs, so this weekend I also want to start prepping the bodywork for paint - grand plans as always. We’ll soon see how life gets in the way I’m sure, but that’s the plan.
Good to be back,
Andy
Re: Monty the rather rusty 2A - 37FG31
Yeah! Andy's back!
Regards,
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: Monty the rather rusty 2A - 37FG31
At last!
All we need now is Neil to be beavering away on his para recce and all will be well in the world (notwithstanding the fact that we can't go to any Land Rover spares days for a good root round!
All we need now is Neil to be beavering away on his para recce and all will be well in the world (notwithstanding the fact that we can't go to any Land Rover spares days for a good root round!
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Cheers fellas, and I agree on the Neil point, although in his defence he’s reliant on the blasters being open.
I’ve been collecting bits from the bay of financial ruin over the last few weeks, and as such have replaced my bulkhead stiffening bar thingy (old one was a bit thin on the threaded end) and have some sundry brackets and whatnot arriving soon. I should be getting some evaporust delivered Saturday morning to treat the bulkhead before zinc primer, so fingers crossed I have what I need to crack on.
Now where did I put those little rubber squares..
Re: Monty the rather rusty 2A - 37FG31
Hi Andy
Good to see your 2a project is still moving forward. Is there any parts you are still missing?
Good to see your 2a project is still moving forward. Is there any parts you are still missing?
Thanks
Stu
55AM52 Ex RAF Land Rover Lightweight GS
Stu
55AM52 Ex RAF Land Rover Lightweight GS
Re: Monty the rather rusty 2A - 37FG31
Hopefully soon Fred. The only lightweight I get to work on at present is the back burner project one at work if I run out of customer work at the end of the day.
Hopefully they will re-open soon and I can re-book the chassis to be done.andrewjsimpson1977 wrote: ↑Wed May 13, 2020 7:59 pmand I agree on the Neil point, although in his defence he’s reliant on the blasters being open.
For now I have to make do with tinkering at work and following the projects on here. So keep the updates coming Andy!
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Hi Stu, hope you’re keeping well? I’m mainly missing:
Hood sticks and tilt
A decent vent panel (but may just get mine repaired)
A non rotten tex magna indicator stalk
Seats (but that’s in hand)
New door tops
Rear view mirror
...and a tonne of paint!