Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Thu Oct 17, 2019 5:22 pm

Your secret’s safe with me Neil :D

So today in a frantic rush between calls, I removed the offending heater panel, and made up a new one. I even remade the curved section, which turned out better than the last one so winner. Please don’t message telling me the mounting flange for the gearbox tunnel vanity panel is too wide - I’ve since cut it down 8-)

0B9CD7AC-B18D-45B7-A771-4222C2AB7AAC.jpeg
0B9CD7AC-B18D-45B7-A771-4222C2AB7AAC.jpeg (828.01 KiB) Viewed 3671 times
3F61CAF8-D324-4039-B4BB-1427883F44FC.jpeg
3F61CAF8-D324-4039-B4BB-1427883F44FC.jpeg (940.43 KiB) Viewed 3671 times

Here it is spotted in place, and more importantly with both floor mounting tabs level with the bottoms of the footwells:

BE0A62F3-B34B-460A-99F0-8DE3B0D26EE2.jpeg
BE0A62F3-B34B-460A-99F0-8DE3B0D26EE2.jpeg (949 KiB) Viewed 3671 times

There are, as always - plenty of finishing jobs to do. There are a few areas where the spot welder wouldn’t reach - but I can get in there with the MIG over the weekend and sort them out. Also, the new heater panel needs cutting in on one side, but that’s a job for when some new 1mm discs arrive.
55AC2AB2-FD15-4F2A-8E80-78842C0CBB38.jpeg
55AC2AB2-FD15-4F2A-8E80-78842C0CBB38.jpeg (1.12 MiB) Viewed 3671 times

Anyway, that’s all from me today as I’m off to return Howard’s welder, and perhaps more importantly - sample some Hertfordshire beer :!

All the best,

Andy

that man
Posts: 95
Joined: Thu Mar 22, 2018 8:13 pm
Location: Cheshire WA7

Re: Monty the rather rusty 2A - 37FG31

Post by that man » Thu Oct 17, 2019 6:11 pm

Truly impressive sir enjoy your well earned beer or two.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Thu Oct 17, 2019 8:56 pm

I ‘left my wallet in the car’ so Howard’s treat tonight :D

landylees
Pastry Chef
Posts: 639
Joined: Mon Jan 29, 2018 8:43 pm
Location: Bishops Stortford

Re: Monty the rather rusty 2A - 37FG31

Post by landylees » Thu Oct 17, 2019 9:54 pm

He only fessed up as he knew I was going to post. As a thank you for borrowing my welder I bought him two beers?? And one of them was a shandy....the old "I left my wallet"..."somewhere else" trick!
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Thu Oct 17, 2019 10:45 pm

landylees wrote: ↑
Thu Oct 17, 2019 9:54 pm
He only fessed up as he knew I was going to post. As a thank you for borrowing my welder I bought him two beers?? And one of them was a shandy....the old "I left my wallet"..."somewhere else" trick!
As a fellow Cheshireman, you are surely familiar with the notion of not wanting to offend one’s host by spoiling them with gifts? I didn’t get a word of thanks for the two negative beers I unbought you. There are just no manners any more :lol:

landylees
Pastry Chef
Posts: 639
Joined: Mon Jan 29, 2018 8:43 pm
Location: Bishops Stortford

Re: Monty the rather rusty 2A - 37FG31

Post by landylees » Thu Oct 17, 2019 11:08 pm

andrewjsimpson1977 wrote: ↑
Thu Oct 17, 2019 10:45 pm
landylees wrote: ↑
Thu Oct 17, 2019 9:54 pm
He only fessed up as he knew I was going to post. As a thank you for borrowing my welder I bought him two beers?? And one of them was a shandy....the old "I left my wallet"..."somewhere else" trick!
As a fellow Cheshireman, you are surely familiar with the notion of not wanting to offend one’s host by spoiling them with gifts? I didn’t get a word of thanks for the two negative beers I unbought you. There are just no manners any more :lol:
ok thank you for the bonnet hinges ;-)
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Oct 18, 2019 3:28 pm

..and thank you for the olives :D

Speaking of which - I had a little tinker on my lunch break.. here’s a dry fit of the replacement pipe after some re-bending and cutting to length.

F7A8CF4F-A55F-400A-8E7F-3907F561F611.jpeg
F7A8CF4F-A55F-400A-8E7F-3907F561F611.jpeg (782 KiB) Viewed 3616 times
I decided to use the bracket after all, even though my wing had been punched for both sets of holes (with and without bracket). As Howard and I were talking about yesterday - the replacement looms have a branch on the passenger side for the headlights - so the bracket will help to route the cables nicely.

And I wanted to use the bracket I bought :)

The pipe ends need soldering, but I’ll tackle that next week when Sara and the kids are away. A whole week to work in the evenings - no idea what I’m going to do with it yet but I’m sure I’ll think of something.

All the best,

Andy

landylees
Pastry Chef
Posts: 639
Joined: Mon Jan 29, 2018 8:43 pm
Location: Bishops Stortford

Re: Monty the rather rusty 2A - 37FG31

Post by landylees » Sat Oct 19, 2019 10:35 pm

thanks for the nuts that turned up today - I tried bending my stainless steel oil pipe and really struggled with the hand bender - what are you using ? Yours looks good, mine less so...
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Oct 20, 2019 3:48 pm

landylees wrote: ↑
Sat Oct 19, 2019 10:35 pm
thanks for the nuts that turned up today - I tried bending my stainless steel oil pipe and really struggled with the hand bender - what are you using ? Yours looks good, mine less so...
They arrived quick! Mine looked rubbish using the bender, and the bender handles bent. The one you see was done by brute force using my fair hands - although a little trick I accidentally stumbled across was to take the groove wheel off my knackered pile bender, and push the pipe into the groove where you want the apex.

You’ll find the wheel has varying tightness against the pipe if you spin it around, so just get it to where it holds itself against the pipe. Then lie the pipe on a wall or lock it on something sturdy (a vice or workmate maybe?) with the wheel underneath the pipe, and push down on the free end of the pipe to bend it around the wheel.

It doesn’t give you tight bends like the original would have been, but a nice gradual arc which hopefully means good flow at least.

Hope that helps,

Andy

Macvfork
Pastry Chef
Posts: 717
Joined: Sun Aug 17, 2014 3:31 pm
Location: Heathfield, sussex

Re: Monty the rather rusty 2A - 37FG31

Post by Macvfork » Wed Nov 06, 2019 7:05 pm

Looking good....
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.

Post Reply