D'oh!
Regards,
D'oh!
Thats a pretty good summary of my life right there!gunner59 wrote: ↑Mon Jul 15, 2019 11:09 amI feel your pain and angst from waiting for the welder to arrive, I've had similar pangs waiting interminably it seems for that all important part to arrive from the mother country. And the absence of which means I have to start a different task which then in turn then gets put on hold as soon as the missing part arrives. Ho, hum. Onwards, upwards and even sideways (at times).
It was bone dry, due I think to the seals having perished to raggedy pale imitations of their former selves. I tried adding some oil, but by then the original bushings were pretty rough, so it still wouldn't turn without a lot of force. Rebuilding was the only way in my case, but I would definitely recommend adding some oil first and seeing if you have more luck. If you don't need to take the spring and shaft out that's a win. You can fit new seals into the end caps without disturbing the main body, and there's no risk of the shaft, bushings and spring coming out unless you decide to knock them out with a hammer. Just remember to remove the steel outer pieces of the old seals. A lesser man would have struggled for half an hour or so to fit new seals to holes that were 'too small'. Not saying I know anyone who did that or anything..Jon S wrote: ↑Mon Jul 15, 2019 11:12 amHi Andy
Just out of interest, was the steering relay leaking and was there any oil in it before you took it apart? They look very fiddly to re-assemble, so was thinking of not stripping mine when the time comes, if no leaks and oil within, just painting it.
Regards