Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Aug 03, 2019 8:57 pm

Gear sticks..haunting memories of a few days ago, when I proudly fitted my newly repaired original, only to snap it in half when testing the change into reverse. Absolute &@*tards. I admit fully to lobbing the remaining piece in my hand across the garage in a sulk. It seems my weld held, but the fatigued metal next to it didn’t. So.. after a couple of days brooding over life being hard (work is busy and Sara has been unwell again this week), I took the spare stick, bent it a little to match the original, and rebuild the assembly and bolted it into the truck. Again.

What to do about the push-fit top of the stick though? I found a die of the correct 1/2 inch BSF size on the bay of redemption, and within a couple of days it had arrived.

It doesn’t, of bloody course, fit my die holder..here it is being blagged together with a nut jammed in because, well because screw you, life..

39C99B22-329A-4545-8BDD-BD523A39E414.jpeg
39C99B22-329A-4545-8BDD-BD523A39E414.jpeg (533.89 KiB) Viewed 2388 times

There are few things in this world as satisfying as cutting a shiny new thread. Or I need to get out more, whatever..

B5600546-AFC4-443A-9996-991AD13A9342.jpeg
B5600546-AFC4-443A-9996-991AD13A9342.jpeg (1.06 MiB) Viewed 2388 times

Old vs new, a good match and shiny shiny..

7CCCFE99-A8CB-4261-9628-8EAE0A5F07DF.jpeg
7CCCFE99-A8CB-4261-9628-8EAE0A5F07DF.jpeg (666.07 KiB) Viewed 2388 times

So, on to the tailgate pieces, which were straightened up with a tickle of the hammer of justice..

4757517A-10F9-4783-A2A5-77EA1538C265.jpeg
4757517A-10F9-4783-A2A5-77EA1538C265.jpeg (1.03 MiB) Viewed 2388 times
Last edited by andrewjsimpson1977 on Sat Aug 03, 2019 9:50 pm, edited 1 time in total.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Aug 03, 2019 9:16 pm

They look like this now:

5C110AF3-FF9B-41DC-8828-D0225103F45E.jpeg
5C110AF3-FF9B-41DC-8828-D0225103F45E.jpeg (966.49 KiB) Viewed 2386 times

I did find a crack in one of the inner pieces, which will need welding up...

0198AFEB-6562-4A57-8192-B3541A140AEC.jpeg
0198AFEB-6562-4A57-8192-B3541A140AEC.jpeg (627.07 KiB) Viewed 2386 times

Oh yeah, and I did promise to start the bulkhead this week didn’t I? Well with various things getting in the way, I only really got as far as welding in the replacement driver’s side dash repair piece:

3E37FD31-ABEA-4411-AD52-9C621F118F27.jpeg
3E37FD31-ABEA-4411-AD52-9C621F118F27.jpeg (1020.84 KiB) Viewed 2386 times
775037A2-DD71-4D70-80A5-2821889D36FD.jpeg
775037A2-DD71-4D70-80A5-2821889D36FD.jpeg (1.04 MiB) Viewed 2386 times

.. but it’s a start, and with a fully working welder, I should be able to do a little each day over the next week or so. I’d say it should be ready for paint in ten days, give or take.

All the best,

Andy

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Mon Aug 05, 2019 6:25 pm

Hiya Andy! :D ,

Good to see you're making a start on the bulkhead. Was sorry to read that the good lady has been unwell. :(

I look forward to some more update pics soon mate.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon Aug 05, 2019 8:01 pm

AR4412 wrote: ↑
Mon Aug 05, 2019 6:25 pm
Hiya Andy! :D ,

Good to see you're making a start on the bulkhead. Was sorry to read that the good lady has been unwell. :(

I look forward to some more update pics soon mate.

Regards,
Thanks Neil - it’s all par for the course these days mate, nothing out of the ordinary, and she’s on the mend now.

I had the drag link straightened today by the lovely folk at A&N Engineering in Toddington. Will pop a ‘fascinating’ pic up later of it in the press :lol:

Andy

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon Aug 05, 2019 10:04 pm

So after umming and ahhing over whether to buy a drag link with a steering damper bracket (which I would need to cut off) or to spend 8 million pounds on an original spec one... I decided to ask around in the village and all roads pointed to a business I have driven past twice a day at least for the last four years, and never knew was there. Down the lane from where I live, and tucked away behind an unassuming bungalow, the road opened up into a yard strewn with machinery and lumps of metal. Promising!

A young lad came out and I handed him the bent drag link, and was met with the encouraging words “can do it now if you can wait mate?”. Brilliant! Yes! Faith in humanity restored!

He asked how straight I needed it, and I laughed and made some sarky comment about 1960s Land Rover manufacturing standards. He set to work, marking reference points In pen on the tubing before pressing it back into alignment. The guy, once he’d started was like a bloodhound on the scent - he wasn’t happy until it was die-straight, and even then seemed unhappy with the tolerances.

What’s more, as he’d done it on his lunch he wouldn’t take any money for it. I pressed the bit of cash I had in my pockets into his hand and explained he’d saved me spending triple that on a new (and probably wrong) one. I said “get yourself a beer” and he said they didn’t let him drink on the job sadly, so it would go to the coffee and cake / biccies fund.

On the wind I heard many of my MLC comrades saying “Ahhh, good lad”


Have a butchers at this beastie:

08214A3A-84B5-48D5-943D-3181DA36AE3E.jpeg
08214A3A-84B5-48D5-943D-3181DA36AE3E.jpeg (1.08 MiB) Viewed 2323 times

I’d probably sell one of the children to get that into the workshop :lol:

So it turns out they are happy to do TIG welding on bits of Land Rover, and regularly get people bringing project parts in. So I’ll be taking the couple of cracked panels over there in the coming weeks before paint.

As for the drag link, the rod ends are now on order, and the new clamps have already arrived. A little bit of me cheered up today.

All the best me harties,

Andy

Ridgy
Pastry Chef
Posts: 677
Joined: Fri Oct 03, 2014 12:35 pm
Location: Essex

Re: Monty the rather rusty 2A - 37FG31

Post by Ridgy » Tue Aug 06, 2019 6:13 pm

Sounds like you've happened across a top banana there mate!
57 KB 58 1983 SIII GS Lightweight

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Wed Aug 07, 2019 11:54 pm

Ridgy wrote: ↑
Tue Aug 06, 2019 6:13 pm
Sounds like you've happened across a top banana there mate!
:lol: see what you did there Steve

Well this evening I ripped the bulkhead apart (again). Just not happy with the repairs to the dash fascia panel bit, I er... chopped it off (yes, all of it, and yes..again). So now I have a temporary goalpost for Henry and a plan to make a whole new fascia panel from scratch.

I’ve kept the dash box though, and the little bracket mount thingy for the voltage regulator. So not a complete write-off :lol:

I think I’ve finally lost what little of the plot remained.

Andy

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Thu Aug 08, 2019 7:46 am

:shock:

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: Monty the rather rusty 2A - 37FG31

Post by chipbury » Fri Aug 09, 2019 8:58 am

Hi Andy,

Just catching up after six weeks away - some good progress when you see it in one go.

Personally I don't see the need to have a full plot - much overrated.

If you need any more taps/dies in particular sizes just let me know as I've got loads of spares available to deserving homes (same goes to anyone else reading :D ).

Cheers,

Chris
2A - 39 FG 70

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Aug 09, 2019 12:14 pm

chipbury wrote: ↑
Fri Aug 09, 2019 8:58 am
Hi Andy,

Just catching up after six weeks away - some good progress when you see it in one go.

Personally I don't see the need to have a full plot - much overrated.

If you need any more taps/dies in particular sizes just let me know as I've got loads of spares available to deserving homes (same goes to anyone else reading :D ).

Cheers,

Chris
That’s very interesting Chris and very good of you to offer. I need a tap for the forward tub / seatbelt bracket mounting holes and a die for the thread on the bulkhead support bar on the passenger side. I’ll have a look tonight and PM you which ones in case you have them if that’s ok?

Post Reply