No problem in taking the diff down to Overlord, I will just need to arrange with Andy to get hold of it.
Good to hear you've made progress, not so good to hear that the drill bit melted into the stud and has wrecked the exhaust manifold.
Regards,
Hiya Fred!Fred wrote: ↑Thu May 11, 2017 6:22 pmI haven’t added the hubs as I am waiting for the new diff which is still with Andy and the Forum Freighters via Overlord Neil and Clive! But, the rest of the rear axle is there now. I was going to add the rear bumperettes and the tow hook until I cut my head on an outrigger as I emerged from torquing the U Bolts - I then realised that the fewer protrusions, the better.
Yes, thank you, I bought a new one. . Fortunately the inlet manifold is serviceable. I had to tap a new hole for the heat shield bolt as there was one broken off in the hole fr that, but that was pretty straightforward. Actually, I have been looking back through the photos of the strip down and am amazed just how much which originally looked hopeless has been refurbished successfully. There is still a long way to go, but re-building should be quicker than the stripdown as most things have been cleaned already. A lot will require further coats of paint, certainly, but I'll get there. Many thanks to you all on the forum for the inspiration and advice. I must say, I was taken with the 1 tonnes on the other thread - especially the second one which was pretty original. But I am assured by Frederica that my next project will be a shepherd's hut! I'll endeavour to get some Land Rover bits into it, though!Gordon Bennett wrote: ↑Thu May 11, 2017 7:52 pmHi Fred,
Great to see the project starting to take shape.
Have you managed to find a replacement exhaust manifold?
Rgds,
Gordon
That's a good question. I don't know. The vehicle has been in private hands now for nearly 20 years, so anything can have happened in that time. The only thing I can guarantee is original will be the chassis (and now I have swapped that) as everything else is replaceable. The tyres I know aren't correct as they are modern 7.50x16 Michelins. And they certainly don't look right - they alter the entire look of the vehicle, I think which is a shame. I would like to replace them with 6.50x16 STA Traxion Vintage tyres, but they would set me back £874 for a set and, with the Michelins being nearly new, that is hard to justify, just at the moment. I think I'd even rather 6.00x16s like civilian SWB Land Rovers, but, they're not much easier to find.Corporal Punishment wrote: ↑Fri May 12, 2017 6:44 amHi Fred. Do you mind if I ask what wheel and tyre combination you are using? They look like defender wheels? Ed.