23HF14

Tell us about any of your Land Rover related projects here.
User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: 23HF14

Post by removeduser185 » Sun Apr 23, 2017 8:32 am

Many thanks for that Clive, as Mac says, that's a useful reminder. But, yes, it is a new tab washer, folded both ways and, actually, it is flush with the nut - it is the shadow playing tricks. I had a bit of a job with it, actually, getting the end float right. Every time I got the end float correct on the inner nut, I put the adjusting nut on and it tightened the whole thing. But, I got there in the end. The tab washer idea isn't brilliant, though as, of course, once in place, you can't see the flats of the inner nut so have to guestimate and hope that tightening it off-centre won't move the nut - very little movement is needed to upset the end float. I am also bothered by the stub-axle to axle-casing bolts being secure. I read recently about a Range ROver driver whose bolts had come undone and his axle was held on by a single remaining bolt!

Anyway off the National Botanical Gardens now for the antiques fair. See you there?

Best

Fred

User avatar
fv1620
Bake Off Judge
Posts: 2268
Joined: Thu Oct 06, 2011 2:16 pm
Location: GB-CMN (formerly UK91)
Contact:

Re: 23HF14

Post by fv1620 » Sun Apr 23, 2017 8:49 am

Fred wrote: ↑
Sun Apr 23, 2017 8:32 am
But, yes, it is a new tab washer, folded both ways and, actually, it is flush with the nut - it is the shadow playing tricks.
Yes & few glasses of cider & posting late at night. When I looked this morning it looked much better! The hazards of late night posting, sorry.

I'm putting the rear of the Wolf back together today & Tina has gone horsing although she belongs to that garden. I know, you want to be on Bargain Hunt that is being filmed there I believe & remember "No talking to the Reds" which seems good advice!
Clive Elliott

Collecting military technical publications, researching into military vehicle electrical systems, licensed radio amateur since 1964 using microwave bands for tropospheric scatter.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: 23HF14

Post by andrewjsimpson1977 » Tue Apr 25, 2017 6:50 pm

A little something to hopefully put a smile on Fred's face..
IMG_2778.JPG
IMG_2778.JPG (75.05 KiB) Viewed 2115 times
IMG_2779.JPG
IMG_2779.JPG (50.46 KiB) Viewed 2115 times
The second photo shows the tag and recon date (I think)

Also got a nice few photos of a Land Rover field ambulance when I went to get the diff - it's one of the ones off EMLRA (Jack Hollingsworth). I won't post them here in the public area, but will put them up elsewhere later.

Andy

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 23HF14

Post by AR4412 » Tue Apr 25, 2017 7:15 pm

andrewjsimpson1977 wrote: ↑
Tue Apr 25, 2017 6:50 pm
A little something to hopefully put a smile on Fred's face..
It brought a smile to my face, even though it's not mine and I don't need it. I think I may have unresolved diff issues from my childhood.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: 23HF14

Post by andrewjsimpson1977 » Tue Apr 25, 2017 7:23 pm

:lol:

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: 23HF14

Post by removeduser185 » Wed Apr 26, 2017 12:12 am

It is indeed a sight to behold! I'm very pleased and it was a good price. So, the next step will be to see how far west it can get using the "Forum Freighters". If anyone is coming this way (I'll be very surprised), and are likely to be seeing Andy, please bring it along with you.

Had a short time in the garage today. Trouble is, my garage is close to the front gate and, being in a village, lots of people stop and chat, so I lost an hour looking at someone's holiday snaps this morning. Still, it meant I was in drinking tea when the cold front came across with its sleet! But, later, I did a bit more cleaning off, de-rusting and prepared the second wheel for painting. Getting there!

Best to all and a BIG thank you to Andy for collecting the diff. You're a star!

Fred

njc21
Posts: 35
Joined: Wed Oct 14, 2015 3:08 pm
Location: Bedford

Re: 23HF14

Post by njc21 » Wed Apr 26, 2017 1:21 pm

Hi Fred,

Where are you? I'm not far from Andy and i'm heading to Tenby at the end of May so i could drop it off somewhere on route if that helps?

Regards,

Neil

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: 23HF14

Post by andrewjsimpson1977 » Wed Apr 26, 2017 1:27 pm

Aha! Bedford Neil #2 enters the fray!

Champion offer to help there matey - I had forgotten you were local - would be happy to drop the diff off with you if your proposal works for Fred.

...Fred?

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 23HF14

Post by AR4412 » Wed Apr 26, 2017 7:21 pm

If onward movement can be arranged from the Overlord show, Clive?, I am willing to take it down there.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: 23HF14

Post by removeduser185 » Thu Apr 27, 2017 7:06 pm

Very many thanks to you, too, Neil. I have had a word with Clive and, yes, he'd be happy to take it off you and bear it back to the Principality. - With only slightly less ceremony than the return of the Stone of Scone to Scotland!

Can't wait to get it - I'm not tightening my U bolts until it is fitted as I don't think the axle casing will lie as level in the springs without it.

But, a little more achieved over the past few days.

I finally managed to separate the inlet and exhaust manifold. Took a really long time and I was really pleased that everything came apart OK in the end, though the studs were a bit thin. So, my neighbour comes round and lends me his stud remover - so what happens, yep, one stub snaps off!

No problem, I use a 3.5mm drill down the centre of the stud, perfect. Go to widen the hole with a 4mm one and, for some bizarre reason, smoke emerges and the end of the (clearly cheap) drill bit melts off into the end of the stud. So that's that then, 'cos when it hardened there was no way I could drill it out. New exhaust manifold required. Annoying as I had been so careful.

But, I now have two wheels painted and the two rear brake pipes fitted so, as work continues on the front axle, I shall also fit the fuel tanks and other bits at the back of the chassis. And a large order in with Paddocks and Craddocks for the front seals and bits and pieces I need, including TREs and, best of all, a new exhaust system - pleased to be fitting that as it is a bit of a milestone as the old one was blown. I have ordered a mild steel one, simply because the engine tone will be as original and, actually, at £35 I can afford to replace it again a few times if I need to. - And it is what was on there originally. I know some will regard that as heresy given that SS ones are so easily fitted and last forever. But then I have few "blue box bits as well which wouldn't meet with universal approval!

Fred

Post Reply