lightweight v8 project
Re: lightweight v8 project
Starting too many jobs! Here's a little one I got finished
- Attachments
-
- IMG_0844.PNG (2.57 MiB) Viewed 2269 times
-
- IMG_0842.PNG (2.6 MiB) Viewed 2269 times
Re: lightweight v8 project
Hi Callum,
Some nice work going on there, keep the pics coming.
Regards
Bob
Some nice work going on there, keep the pics coming.
Regards
Bob
042Bobf
19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.
19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: lightweight v8 project
Nice clean up job Callum - effort getting things right now should mean you'll never have to do it again. It seems frustratingly slow sometimes this restoration business - I often spend hours in the garage, just to look at the results and think "is that it?!" But all these things add up to greatness in the end.
Keep up the good work,
Andy
Keep up the good work,
Andy
Re: lightweight v8 project
I need to start finishing things off I'm hoping to get loads done this weekend and pick up a new seat box! Does anyone know the best paint for the steering wheel cowl it seems the one I use doesn't dry smooth
Re: lightweight v8 project
Depends how bad yours is. I managed to get away without painting my steering cowl, got it looking ok with plastic bumper black.
The wiper motor cover was too scuffed and needed filling so i painted that with plastic primer then bog standard gloss rattle cans.
Are you getting a rough finish? What sort of temperature conditions do you have? Are you laying on the coats thick enough that the surface is wet all over? It needs that to get a gloss finish otherwise it goes on a bit "dusty" and will appear quite matt.
The wiper motor cover was too scuffed and needed filling so i painted that with plastic primer then bog standard gloss rattle cans.
Are you getting a rough finish? What sort of temperature conditions do you have? Are you laying on the coats thick enough that the surface is wet all over? It needs that to get a gloss finish otherwise it goes on a bit "dusty" and will appear quite matt.
57 KB 58 1983 SIII GS Lightweight
Re: lightweight v8 project
I'm not sure I think it's possibly to do with the temperature! It's just too cold to paint I think I'll spend my time in the coming weeks just cleaning up things ready for paint! Here's a picture of the seat box I got today and the change over tap I managed to get cleaned up!
Re: lightweight v8 project
Some cleaning required
- Attachments
-
- IMG_0887.JPG (2.17 MiB) Viewed 2216 times
-
Vlaanderen
Re: lightweight v8 project
Hi Callum,
For the wiper motor cover and the steering column cowls "PlastiKote" is brilliant, available from B&Q.
Regards, Norman.
For the wiper motor cover and the steering column cowls "PlastiKote" is brilliant, available from B&Q.
Regards, Norman.
Re: lightweight v8 project
Thanks Lads I'll give that plastikote ago and let you know has anyone els been doing a painting in this cold weather??