lightweight v8 project

Tell us about any of your Land Rover related projects here.
Callum123
Posts: 322
Joined: Tue Feb 16, 2016 9:02 pm

Re: lightweight v8 project

Post by Callum123 » Thu Feb 02, 2017 10:58 pm

Starting too many jobs! Here's a little one I got finished
Attachments
IMG_0844.PNG
IMG_0844.PNG (2.57 MiB) Viewed 2267 times
IMG_0842.PNG
IMG_0842.PNG (2.6 MiB) Viewed 2267 times

User avatar
Bob Fell
Cake Guru
Posts: 3044
Joined: Wed Sep 18, 2013 7:17 am
Location: Melton Mowbray

Re: lightweight v8 project

Post by Bob Fell » Fri Feb 03, 2017 6:39 am

Hi Callum,
Some nice work going on there, keep the pics coming.

Regards
Bob
042Bobf


19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: lightweight v8 project

Post by andrewjsimpson1977 » Fri Feb 03, 2017 8:06 am

Nice clean up job Callum - effort getting things right now should mean you'll never have to do it again. It seems frustratingly slow sometimes this restoration business - I often spend hours in the garage, just to look at the results and think "is that it?!" But all these things add up to greatness in the end.

Keep up the good work,

Andy

Callum123
Posts: 322
Joined: Tue Feb 16, 2016 9:02 pm

Re: lightweight v8 project

Post by Callum123 » Fri Feb 03, 2017 10:18 pm

I need to start finishing things off I'm hoping to get loads done this weekend and pick up a new seat box! Does anyone know the best paint for the steering wheel cowl it seems the one I use doesn't dry smooth

Ridgy
Pastry Chef
Posts: 677
Joined: Fri Oct 03, 2014 12:35 pm
Location: Essex

Re: lightweight v8 project

Post by Ridgy » Sat Feb 04, 2017 10:05 am

Depends how bad yours is. I managed to get away without painting my steering cowl, got it looking ok with plastic bumper black.

The wiper motor cover was too scuffed and needed filling so i painted that with plastic primer then bog standard gloss rattle cans.

Are you getting a rough finish? What sort of temperature conditions do you have? Are you laying on the coats thick enough that the surface is wet all over? It needs that to get a gloss finish otherwise it goes on a bit "dusty" and will appear quite matt.
57 KB 58 1983 SIII GS Lightweight

Callum123
Posts: 322
Joined: Tue Feb 16, 2016 9:02 pm

Re: lightweight v8 project

Post by Callum123 » Mon Feb 06, 2017 9:06 pm

I'm not sure I think it's possibly to do with the temperature! It's just too cold to paint I think I'll spend my time in the coming weeks just cleaning up things ready for paint! Here's a picture of the seat box I got today and the change over tap I managed to get cleaned up!
IMG_0886.JPG
IMG_0886.JPG (2.12 MiB) Viewed 2216 times

Callum123
Posts: 322
Joined: Tue Feb 16, 2016 9:02 pm

Re: lightweight v8 project

Post by Callum123 » Mon Feb 06, 2017 9:16 pm

Some cleaning required
Attachments
IMG_0887.JPG
IMG_0887.JPG (2.17 MiB) Viewed 2214 times

Vlaanderen

Re: lightweight v8 project

Post by Vlaanderen » Mon Feb 06, 2017 9:39 pm

Hi Callum,

For the wiper motor cover and the steering column cowls "PlastiKote" is brilliant, available from B&Q.

Regards, Norman.

Dickyboy

Re: lightweight v8 project

Post by Dickyboy » Tue Feb 07, 2017 6:37 am

Nice work there Callum

Callum123
Posts: 322
Joined: Tue Feb 16, 2016 9:02 pm

Re: lightweight v8 project

Post by Callum123 » Tue Feb 07, 2017 8:27 am

Thanks Lads I'll give that plastikote ago and let you know has anyone els been doing a painting in this cold weather??

Post Reply