Seat belts

Any Land Rover related info can be posted here.
User avatar
StuWright
Master Baker
Posts: 1740
Joined: Wed Feb 24, 2016 11:10 pm
Location: Southampton

Seat belts

Post by StuWright » Sat Oct 01, 2016 11:39 pm

Ok for the moment I am going to stick to fitting the original seat belts and look at inertia if we ever get hold of the correct LR frames.

Before stripping I had a load of make shift reinforcing plates with o rings and climbing shackles. Not good and certainly not safe. I have looked on the parts disc but was unable to see any part numbers.

Does anyone know what I should have seatbelt wise in a 1972 GS and is there a list of fittings so I can just go buy them? Due to time I can't wait around for bits to come up on ebay as I need to work these out in the next week. Thanks in advance for any replies. ;)
Thanks

Stu

55AM52 Ex RAF Land Rover Lightweight GS

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Seat belts

Post by removeduser185 » Sun Oct 02, 2016 12:19 am

Replied in my email

Fred

User avatar
StuWright
Master Baker
Posts: 1740
Joined: Wed Feb 24, 2016 11:10 pm
Location: Southampton

Re: Seat belts

Post by StuWright » Sun Oct 02, 2016 8:27 am

Thanks Fred. :D
Thanks

Stu

55AM52 Ex RAF Land Rover Lightweight GS

User avatar
andracav
Posts: 44
Joined: Tue Sep 18, 2012 4:41 pm
Location: Bergamo-Italy

Re: Seat belts

Post by andracav » Tue Oct 04, 2016 4:35 pm

I need same informations, please ;)
Thanks
Regards
Andrea
@ndracav

30FK91

User avatar
Sidders101
Bake Off Judge
Posts: 2406
Joined: Wed Apr 02, 2014 7:57 pm
Location: Winchester

Re: Seat belts

Post by Sidders101 » Tue Oct 04, 2016 4:42 pm

Britax clunk click beautiful brushed chrome classic lumps of machined perfection.....a pain to use but correct for year..expensive to buy...hard to find....reproductions common but still not cheap....personally I'm not fussy about belts..as long as they've got British standard numbers on them they will do...I use static belts...3 point anchor..so easy to fit and can tuck away for display...lap belt for centre.
I can't remember when the inertia belt rear bulkhead framework was introduced in the LWT...so over to you lot.
Sidders


1974 Series 3 LWT 12v RHD 69-FM-24 , Royal Marines ("Intrepid")
1976 101 forward control gun tractor 12v RHD- 73-FL-43 ex 1,2 & 3 Para ("Kryten")
1979 Sankey NT Trailer 06-HF-86 78 Engr Reg (Herman)
1978 Trophy Frank Spencer impression (1st place)

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Seat belts

Post by removeduser185 » Tue Oct 04, 2016 6:51 pm

andracav wrote:I need same informations, please ;)
Thanks
Regards
Andrea
As Sidders has said, up until around 1980 the Lightweight had static belts. I understand that Britax were the original suppliers. At first, the straps were just that - only straps, later, as with all cars, the short strap was replaced with a stalk to enable them to be done up with one hand. Whether there was ever a lap belt fitted as standard for the centre passenger I don't know, but, I presume there was later on to keep in step with British and European law. Again, as Sidders says, original seatbelts are all but unobtainable, except repro ones through specialist classic car arts suppliers. And they are very expensive.

Fred

User avatar
StuWright
Master Baker
Posts: 1740
Joined: Wed Feb 24, 2016 11:10 pm
Location: Southampton

Re: Seat belts

Post by StuWright » Tue Oct 04, 2016 8:59 pm

Fred wrote:
andracav wrote:I need same informations, please ;)
Thanks
Regards
Andrea
As Sidders has said, up until around 1980 the Lightweight had static belts. I understand that Britax were the original suppliers. At first, the straps were just that - only straps, later, as with all cars, the short strap was replaced with a stalk to enable them to be done up with one hand. Whether there was ever a lap belt fitted as standard for the centre passenger I don't know, but, I presume there was later on to keep in step with British and European law. Again, as Sidders says, original seatbelts are all but unobtainable, except repro ones through specialist classic car arts suppliers. And they are very expensive.

Fred
Anyone know where I could get repro ones from before I go down the Exmoor trim route?
Thanks

Stu

55AM52 Ex RAF Land Rover Lightweight GS

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Seat belts

Post by removeduser185 » Tue Oct 04, 2016 9:26 pm

http://www.johnrichardssurplus.co.uk/me ... 041_14.jpg This is what you are looking for. He's out of stock with the light grey ones, though has dark and they're a bit expensive. But knowing what you're after you can google images and chase up anything which looks close. Holdens and other classic car specialists may also be source.

Fred

User avatar
andracav
Posts: 44
Joined: Tue Sep 18, 2012 4:41 pm
Location: Bergamo-Italy

Re: Seat belts

Post by andracav » Wed Oct 05, 2016 10:22 am

Thanks to all answers!
Andrea
@ndracav

30FK91

Jiml
Pastry Chef
Posts: 644
Joined: Sat Jul 18, 2015 1:56 pm
Location: Burnley Lancashire
Contact:

Re: Seat belts

Post by Jiml » Wed Oct 05, 2016 12:14 pm

Failing all of the above a visit to a scrap yard might possibly yield results, I have access to an old series ambulance and there were still lap seat belts fitted, not sure of condition but I can go take a look if you like.
52HG42 my current love interest

Post Reply