Monty the rather rusty 2A - 37FG31
Re: Monty the rather rusty 2A - 37FG31
Crusty, but totally original and complete, you lucky devil. You won't appreciate it now, but you'll see when it comes to reassembly, and the expensive body panels seem to be really straight, so an extra bonus. It'll save you so much time and head scratching. As the others have said, find a new bulkhead top rail. Easier to find these days when compared to a Series III item.
The 193 should be the lot number for when it was auctioned off. My suggestion would be to jump onto the HMVF forum, and seek out Wally Dugan, the former curator of the much missed Museum of Army Transport. He seems to have most of the sales catalogues from 1919 to the 70s, so by my reckoning, he should be able to tell you when it was sold off, where, and for how much. With any luck, you'll end up with a scan of the actual sales catalogue, to go alongside the B card, which you can get from the RLC Museum.
Good luck with the restoration, it's a lot of heartache, swearing and skinned knuckles, but will be worth it in the end.
The 193 should be the lot number for when it was auctioned off. My suggestion would be to jump onto the HMVF forum, and seek out Wally Dugan, the former curator of the much missed Museum of Army Transport. He seems to have most of the sales catalogues from 1919 to the 70s, so by my reckoning, he should be able to tell you when it was sold off, where, and for how much. With any luck, you'll end up with a scan of the actual sales catalogue, to go alongside the B card, which you can get from the RLC Museum.
Good luck with the restoration, it's a lot of heartache, swearing and skinned knuckles, but will be worth it in the end.
1984 RAF 109 GS 63KC41 RAF Catterick
1975 RAF Ltwt 75AM54 RAF Luqa and Wyton
1962 Army 88 GS 09EK34 DERR
1975 RAF Ltwt 75AM54 RAF Luqa and Wyton
1962 Army 88 GS 09EK34 DERR
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Thanks for the input Chipbury / Bob / Neil / Barmy,
Re: the vent panel - disappointing as i had hoped to save it. Will probably do a you recommend when the time comes, but in the meantime I may hack out the rot and see what can be done with the old one as a bit of a side project.
Having had another go today (i'll post some more pics in a bit) - I have reached the conclusion that the chassis is definitely ker-nackered. The front looked ok to me, until i tapped the bottom of the front PTO hole earlier with a spanner, and half the bottom of it fell off. Grr.
Barmy - I'll try to track dow Wally thanks for the heads up.
A few more questions:
1) Does anyone know how to straighten that bumper? I don't have access to a press, so the next most appropriate tool i own is a sledgehammer.
2) The front glass indicator / side light lenses (finned-type 'sputnik' ones) screwed off easily, but the back ones are jammed on tight. Any neat tricks for getting these off without them smashing and cutting me to ribbons?
3) I managed to slip with a spanner and gouge into the fins on the radiator. Annoyed! Looking at it though, there is damage to the fins elsewhere, so it would have needed doing anyway. I know radiators can be re-cored, but what about the fins on the outside? Any ideas what the cost of a full radiator overall would be?
4) I am in two minds as to whether this rebuild will be really true to original - particularly with regard to brakes. This was triggered by a note i got from Les who makes the new footwells - he asked me if I wanted to change the pedal hole size up to accommodate the larger pedal for the servo brakes of the later series 3 spec. I read elsewhere (on here I think that someone took this approach at first, but blanked up the larger hole - allowing them to upgrade to servo brakes later. I really like this idea, but having never driven one without servo brakes (or with for that matter), can anyone vouch for how much difference there is? I plan to use this lightweight as an occasional fun car, but would like the option of going on longer journeys (maybe even to the continent) eventually. Would servo brakes be a must for this?
All the best,
Andy
Re: the vent panel - disappointing as i had hoped to save it. Will probably do a you recommend when the time comes, but in the meantime I may hack out the rot and see what can be done with the old one as a bit of a side project.
Having had another go today (i'll post some more pics in a bit) - I have reached the conclusion that the chassis is definitely ker-nackered. The front looked ok to me, until i tapped the bottom of the front PTO hole earlier with a spanner, and half the bottom of it fell off. Grr.
Barmy - I'll try to track dow Wally thanks for the heads up.
A few more questions:
1) Does anyone know how to straighten that bumper? I don't have access to a press, so the next most appropriate tool i own is a sledgehammer.
2) The front glass indicator / side light lenses (finned-type 'sputnik' ones) screwed off easily, but the back ones are jammed on tight. Any neat tricks for getting these off without them smashing and cutting me to ribbons?
3) I managed to slip with a spanner and gouge into the fins on the radiator. Annoyed! Looking at it though, there is damage to the fins elsewhere, so it would have needed doing anyway. I know radiators can be re-cored, but what about the fins on the outside? Any ideas what the cost of a full radiator overall would be?
4) I am in two minds as to whether this rebuild will be really true to original - particularly with regard to brakes. This was triggered by a note i got from Les who makes the new footwells - he asked me if I wanted to change the pedal hole size up to accommodate the larger pedal for the servo brakes of the later series 3 spec. I read elsewhere (on here I think that someone took this approach at first, but blanked up the larger hole - allowing them to upgrade to servo brakes later. I really like this idea, but having never driven one without servo brakes (or with for that matter), can anyone vouch for how much difference there is? I plan to use this lightweight as an occasional fun car, but would like the option of going on longer journeys (maybe even to the continent) eventually. Would servo brakes be a must for this?
All the best,
Andy
Last edited by andrewjsimpson1977 on Sun Sep 06, 2015 3:31 pm, edited 1 time in total.
-
Vlaanderen
Re: Monty the rather rusty 2A - 37FG31
Hi Andy,
"2) The front glass indicator / side light lenses (finned-type 'sputnik' ones) screwed off easily, but the back ones are jammed on tight. Any neat tricks for getting these off without them smashing and cutting me to ribbons?".
Kettle of hot water poured on the metal lens casing, use a cloth to undo the lens, but not the wifes best tea towel
.
Regards, Norman.
"2) The front glass indicator / side light lenses (finned-type 'sputnik' ones) screwed off easily, but the back ones are jammed on tight. Any neat tricks for getting these off without them smashing and cutting me to ribbons?".
Kettle of hot water poured on the metal lens casing, use a cloth to undo the lens, but not the wifes best tea towel
Regards, Norman.
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Nice - thanks Norm.
I'm still waiting for her to find the 'self portrait in oil and gunge' artwork I left on one of her white towels earlier. It was reminiscent of the Turin Shroud - i had to stop and admire it briefly before hurriedly rushing it into the laundry pile.
I'm still waiting for her to find the 'self portrait in oil and gunge' artwork I left on one of her white towels earlier. It was reminiscent of the Turin Shroud - i had to stop and admire it briefly before hurriedly rushing it into the laundry pile.
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Alright today's haul:
Wing and rad panel off (not separated from each other though - drill battery died (again) so i couldn't kill the last two bolts holding them together. Instead I decided to cut the loom and oil cooler pipes (both shot anyway) and lift the two bits out as one. Also got a lot of the remaining tub bolts out, and noted that there is no convoy light (I don't think the rear crossmember is the original - the wiring is there but not the light).
Another part on the shopping list!
Wing and rad panel off (not separated from each other though - drill battery died (again) so i couldn't kill the last two bolts holding them together. Instead I decided to cut the loom and oil cooler pipes (both shot anyway) and lift the two bits out as one. Also got a lot of the remaining tub bolts out, and noted that there is no convoy light (I don't think the rear crossmember is the original - the wiring is there but not the light).
Another part on the shopping list!
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Front end pics
- Attachments
-
- thumb_img_2569_1024.jpg (72.81 KiB) Viewed 3362 times
-
- thumb_img_2565_1024.jpg (78.63 KiB) Viewed 3362 times
-
- thumb_img_2563_1024.jpg (66.97 KiB) Viewed 3362 times
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
More bits..
- Attachments
-
- thumb_img_2574_1024.jpg (68.23 KiB) Viewed 3361 times
-
- thumb_img_2567_1024.jpg (53.75 KiB) Viewed 3361 times
-
- thumb_img_2578_1024.jpg (54.17 KiB) Viewed 3361 times
-
Vlaanderen
Re: Monty the rather rusty 2A - 37FG31
andrewjsimpson1977 wrote:Nice - thanks Norm.
I'm still waiting for her to find the 'self portrait in oil and gunge' artwork I left on one of her white towels earlier. It was reminiscent of the Turin Shroud - i had to stop and admire it briefly before hurriedly rushing it into the laundry pile.
Hi Andy,
That's the spirit!!, love it. As for the front bumper all I can recommend is Uri Geller.
Regards, Norman.
Re: Monty the rather rusty 2A - 37FG31
My mate had a dodgy bumper (although nit quite as dog legged as yours
) which he tied a strong rope to, wrapped it around a stout tree then reversed gently and it looks very good now!
2A - 39 FG 70
-
Gordon Bennett
- Maître Pâtissier
- Posts: 7422
- Joined: Sun Jan 10, 2010 12:21 pm
Re: Monty the rather rusty 2A - 37FG31
Hi Andy,
Great pics, keep em coming.
Thanks for sharing.
Rgds,
Gordon
Great pics, keep em coming.
Thanks for sharing.
Rgds,
Gordon