Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
Ltwtbarmy
Posts: 119
Joined: Fri Dec 13, 2013 5:32 pm

Re: Monty the rather rusty 2A - 37FG31

Post by Ltwtbarmy » Sun Sep 06, 2015 1:01 pm

Crusty, but totally original and complete, you lucky devil. You won't appreciate it now, but you'll see when it comes to reassembly, and the expensive body panels seem to be really straight, so an extra bonus. It'll save you so much time and head scratching. As the others have said, find a new bulkhead top rail. Easier to find these days when compared to a Series III item.

The 193 should be the lot number for when it was auctioned off. My suggestion would be to jump onto the HMVF forum, and seek out Wally Dugan, the former curator of the much missed Museum of Army Transport. He seems to have most of the sales catalogues from 1919 to the 70s, so by my reckoning, he should be able to tell you when it was sold off, where, and for how much. With any luck, you'll end up with a scan of the actual sales catalogue, to go alongside the B card, which you can get from the RLC Museum.

Good luck with the restoration, it's a lot of heartache, swearing and skinned knuckles, but will be worth it in the end.
1984 RAF 109 GS 63KC41 RAF Catterick
1975 RAF Ltwt 75AM54 RAF Luqa and Wyton
1962 Army 88 GS 09EK34 DERR

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Sep 06, 2015 3:12 pm

Thanks for the input Chipbury / Bob / Neil / Barmy,

Re: the vent panel - disappointing as i had hoped to save it. Will probably do a you recommend when the time comes, but in the meantime I may hack out the rot and see what can be done with the old one as a bit of a side project.

Having had another go today (i'll post some more pics in a bit) - I have reached the conclusion that the chassis is definitely ker-nackered. The front looked ok to me, until i tapped the bottom of the front PTO hole earlier with a spanner, and half the bottom of it fell off. Grr.

Barmy - I'll try to track dow Wally thanks for the heads up.

A few more questions:

1) Does anyone know how to straighten that bumper? I don't have access to a press, so the next most appropriate tool i own is a sledgehammer.

2) The front glass indicator / side light lenses (finned-type 'sputnik' ones) screwed off easily, but the back ones are jammed on tight. Any neat tricks for getting these off without them smashing and cutting me to ribbons?

3) I managed to slip with a spanner and gouge into the fins on the radiator. Annoyed! Looking at it though, there is damage to the fins elsewhere, so it would have needed doing anyway. I know radiators can be re-cored, but what about the fins on the outside? Any ideas what the cost of a full radiator overall would be?

4) I am in two minds as to whether this rebuild will be really true to original - particularly with regard to brakes. This was triggered by a note i got from Les who makes the new footwells - he asked me if I wanted to change the pedal hole size up to accommodate the larger pedal for the servo brakes of the later series 3 spec. I read elsewhere (on here I think that someone took this approach at first, but blanked up the larger hole - allowing them to upgrade to servo brakes later. I really like this idea, but having never driven one without servo brakes (or with for that matter), can anyone vouch for how much difference there is? I plan to use this lightweight as an occasional fun car, but would like the option of going on longer journeys (maybe even to the continent) eventually. Would servo brakes be a must for this?

All the best,

Andy
Last edited by andrewjsimpson1977 on Sun Sep 06, 2015 3:31 pm, edited 1 time in total.

Vlaanderen

Re: Monty the rather rusty 2A - 37FG31

Post by Vlaanderen » Sun Sep 06, 2015 3:25 pm

Hi Andy,

"2) The front glass indicator / side light lenses (finned-type 'sputnik' ones) screwed off easily, but the back ones are jammed on tight. Any neat tricks for getting these off without them smashing and cutting me to ribbons?".

Kettle of hot water poured on the metal lens casing, use a cloth to undo the lens, but not the wifes best tea towel :D .

Regards, Norman.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Sep 06, 2015 3:34 pm

Nice - thanks Norm.

I'm still waiting for her to find the 'self portrait in oil and gunge' artwork I left on one of her white towels earlier. It was reminiscent of the Turin Shroud - i had to stop and admire it briefly before hurriedly rushing it into the laundry pile.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Sep 06, 2015 3:42 pm

Alright today's haul:

Wing and rad panel off (not separated from each other though - drill battery died (again) so i couldn't kill the last two bolts holding them together. Instead I decided to cut the loom and oil cooler pipes (both shot anyway) and lift the two bits out as one. Also got a lot of the remaining tub bolts out, and noted that there is no convoy light (I don't think the rear crossmember is the original - the wiring is there but not the light).

Another part on the shopping list!

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Sep 06, 2015 3:45 pm

Front end pics
Attachments
thumb_img_2569_1024.jpg
thumb_img_2569_1024.jpg (72.81 KiB) Viewed 3365 times
thumb_img_2565_1024.jpg
thumb_img_2565_1024.jpg (78.63 KiB) Viewed 3365 times
thumb_img_2563_1024.jpg
thumb_img_2563_1024.jpg (66.97 KiB) Viewed 3365 times

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Sep 06, 2015 3:47 pm

More bits..
Attachments
thumb_img_2574_1024.jpg
thumb_img_2574_1024.jpg (68.23 KiB) Viewed 3364 times
thumb_img_2567_1024.jpg
thumb_img_2567_1024.jpg (53.75 KiB) Viewed 3364 times
thumb_img_2578_1024.jpg
thumb_img_2578_1024.jpg (54.17 KiB) Viewed 3364 times

Vlaanderen

Re: Monty the rather rusty 2A - 37FG31

Post by Vlaanderen » Sun Sep 06, 2015 5:04 pm

andrewjsimpson1977 wrote:Nice - thanks Norm.

I'm still waiting for her to find the 'self portrait in oil and gunge' artwork I left on one of her white towels earlier. It was reminiscent of the Turin Shroud - i had to stop and admire it briefly before hurriedly rushing it into the laundry pile.

:lol: :lol: :lol: :lol:

Hi Andy,

That's the spirit!!, love it. As for the front bumper all I can recommend is Uri Geller.

Regards, Norman.

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: Monty the rather rusty 2A - 37FG31

Post by chipbury » Sun Sep 06, 2015 6:34 pm

My mate had a dodgy bumper (although nit quite as dog legged as yours :) ) which he tied a strong rope to, wrapped it around a stout tree then reversed gently and it looks very good now!
2A - 39 FG 70

Gordon Bennett
Maître Pâtissier
Posts: 7422
Joined: Sun Jan 10, 2010 12:21 pm

Re: Monty the rather rusty 2A - 37FG31

Post by Gordon Bennett » Sun Sep 06, 2015 6:35 pm

Hi Andy,

Great pics, keep em coming.

Thanks for sharing.

Rgds,
Gordon

Post Reply