55HG98. Para Recce Rebuild.

Tell us about any of your Land Rover related projects here.
User avatar
the landy man
Cake Guru
Posts: 3080
Joined: Wed Sep 28, 2011 1:00 pm
Location: BOGNOR REGIS

Re: 55HG98. Para Recce Rebuild.

Post by the landy man » Thu Aug 08, 2013 8:11 pm

About bloody time you started your rebuild thread! :o :lol:
We are all waiting for this one to start!!
Don't forget I have access to some photos of a para recce built by my mate using the original parts he picked up when at Aldershot.
Shame I don't live closer to you,I would love to lend a hand,we could have it finished by the end of next month! :lol:
..ROD..
..ROD..
Bognor Regis,West Sussex


1972 S3 LIGHTWEIGHT 53 AM 74,RAF GS .Waddington strike command
1979 LIGHTWEIGHT 10 GX 11,GS .Black watch 1st battalion
1964 SERIES 2A..
Sankey narrow track,29 EN 84
Sankey narrow track project.
1967 BSA b40 WD 350cc.
1957 Triumph 6T Thunderbird.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 55HG98. Para Recce Rebuild.

Post by AR4412 » Thu Aug 08, 2013 8:22 pm

Hi Rod!

It's been a while coming hasn't it? It wasn't worth starting the thread until my 'You can start it now' deadline passed or I'd just keep everyone hanging around waiting.

I might take you up on your kind offer to pop down and stay over soon so I can visit your mate and look at his bits. Ooh-err!

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 55HG98. Para Recce Rebuild.

Post by AR4412 » Thu Aug 08, 2013 8:32 pm

Most of the time I've had available to work on the project this week have been taken up with the bonnet. All the rusty nuts on the remains of the spare wheel buffers were persuaded to come undone, unlike the washer jets who's securing nuts were siezed solid. These were just twisted until they snapped and new jets added to the shopping list.

I've knocked out a lot of small dents, but have a couple at the front left to do as the aluminium will need annealing and my gas torch has expired so need to buy a new one tomorrow.

I have a couple of repairs to make where spot welds have let go and repairs have been carried out with pop rivets. Whoever repaired the strengthening rib when it let go wasn't overly concerned with lining it up correctly when he drilled the holes. Bloody REME!

The bodged repair to the strengthening rib.
SAM_0867.JPG
SAM_0867.JPG (30.85 KiB) Viewed 2826 times
Repair to rear of bonnet.
SAM_0868.JPG
SAM_0868.JPG (29.63 KiB) Viewed 2826 times
These will be cunningly repaired next week when my new goodies arrive.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 55HG98. Para Recce Rebuild.

Post by AR4412 » Thu Aug 08, 2013 8:36 pm

This is what has taken all my time for the last couple of days.
SAM_0869.JPG
SAM_0869.JPG (35.18 KiB) Viewed 2826 times
SAM_0870.JPG
SAM_0870.JPG (42.23 KiB) Viewed 2826 times
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 55HG98. Para Recce Rebuild.

Post by AR4412 » Thu Aug 08, 2013 8:44 pm

It's taken me about eight hours to do this, and it still needs some dents sorting and two cracks welding.

My bloody arm is killing me! But its flat and ready for primer with any bare aluminium given a protective coat of etch primer for now. Luckily the underside hasn't had two ton of paint applied to it and will just need a light rub down before priming.
SAM_0871.JPG
SAM_0871.JPG (34.34 KiB) Viewed 2826 times
This is the stage I'm at now. When my arm starts talking to me again I will start rubbing down the wings and then work backwards.

Can't wait! :lol:

That's the thread up to speed for now, more updates will appear as work gets done.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
the landy man
Cake Guru
Posts: 3080
Joined: Wed Sep 28, 2011 1:00 pm
Location: BOGNOR REGIS

Re: 55HG98. Para Recce Rebuild.

Post by the landy man » Thu Aug 08, 2013 9:21 pm

AR4412 wrote:Hi

I might take you up on your kind offer to pop down and stay over soon so I can visit your mate and look at his bits. Ooh-err!

Regards,
Always welcome Neil.just let me know.
..ROD..
..ROD..
Bognor Regis,West Sussex


1972 S3 LIGHTWEIGHT 53 AM 74,RAF GS .Waddington strike command
1979 LIGHTWEIGHT 10 GX 11,GS .Black watch 1st battalion
1964 SERIES 2A..
Sankey narrow track,29 EN 84
Sankey narrow track project.
1967 BSA b40 WD 350cc.
1957 Triumph 6T Thunderbird.

User avatar
the landy man
Cake Guru
Posts: 3080
Joined: Wed Sep 28, 2011 1:00 pm
Location: BOGNOR REGIS

Re: 55HG98. Para Recce Rebuild.

Post by the landy man » Thu Aug 08, 2013 9:28 pm

Invest in a random orbital sander Neil,less elbow/arm ache and more finger tingle! :o
Well worth looking into if you intend to prep the bodywork by hand.
..ROD..
..ROD..
Bognor Regis,West Sussex


1972 S3 LIGHTWEIGHT 53 AM 74,RAF GS .Waddington strike command
1979 LIGHTWEIGHT 10 GX 11,GS .Black watch 1st battalion
1964 SERIES 2A..
Sankey narrow track,29 EN 84
Sankey narrow track project.
1967 BSA b40 WD 350cc.
1957 Triumph 6T Thunderbird.

User avatar
Tinweasel
Maître Pâtissier
Posts: 5280
Joined: Fri Mar 05, 2010 8:23 pm

Re: 55HG98. Para Recce Rebuild.

Post by Tinweasel » Thu Aug 08, 2013 9:40 pm

the landy man wrote:Invest in a random orbital sander Neil,less elbow/arm ache and more finger tingle! :o
Well worth looking into if you intend to prep the bodywork by hand.
..ROD..
I will second that, they do a fantastic job of cleaning off and smoothing down paint work, well worth having one to hand
Image

Rudolf Hess was the editor of mine Kampf, so was he the first grammar nazi?

Tring, Hertfordshire

User avatar
the landy man
Cake Guru
Posts: 3080
Joined: Wed Sep 28, 2011 1:00 pm
Location: BOGNOR REGIS

Re: 55HG98. Para Recce Rebuild.

Post by the landy man » Thu Aug 08, 2013 10:42 pm

My bonnet after 2-3 hours work with sander.
A wire wheel in a drill removed any paint left in the spot welds!

Image

Easier than doing it all by hand or paint stripper.

..ROD..
..ROD..
Bognor Regis,West Sussex


1972 S3 LIGHTWEIGHT 53 AM 74,RAF GS .Waddington strike command
1979 LIGHTWEIGHT 10 GX 11,GS .Black watch 1st battalion
1964 SERIES 2A..
Sankey narrow track,29 EN 84
Sankey narrow track project.
1967 BSA b40 WD 350cc.
1957 Triumph 6T Thunderbird.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 55HG98. Para Recce Rebuild.

Post by AR4412 » Fri Aug 09, 2013 10:04 am

the landy man wrote:Invest in a random orbital sander Neil,less elbow/arm ache and more finger tingle! :o
Well worth looking into if you intend to prep the bodywork by hand.
..ROD..
I do need to invest in one of those. It wasn't all manual labour, I used a sanding disc adaptor in a drill to cut through the layers of paint, and the time taken includes that spent to remove the clutter from the bonnet and doing some panel beating. It was getting through the shear thickness of the paint down to the bottom layers that took some time. It was a good few milimeters thick in places and as hard as nails, I didn't want to go down the paint stripper route even though I've got nearly 10 litres of Ardrox in the garage as I didn't want to miss any evidence of past history as the layers came off. It was the last two hours flattening off with a sanding block and going round the panel edges with a sheet of paper on its own that made the arm ache.

Off out later to pick up a new blowtorch so might come back with a new sander too.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

Post Reply