Search found 70 matches
- Sat Oct 24, 2026 2:07 pm
- Forum: Problems
- Topic: Both heater and wipers/washer not working
- Replies: 4
- Views: 717
Re: Both heater and wipers/washer not working
Hi Andrew, Have a look at the wiring diagrams on the website linked below. They cover most versions and you may be able to work out where your problem lies. I assume yours is a S3 as you have a heater and refer to fuses on the column. If you can confirm what year and 12v or 24v we may be able to hel...
- Sun Sep 27, 2026 1:42 pm
- Forum: Problems
- Topic: no smiths heater
- Replies: 2
- Views: 2600
Re: no smiths heater
The Chinese diesel heaters don't have a 'Tilt' switch. However, they are not recommended to be used while driving. I suppose the position of the air inlet and exhaust outlet could be affected by the draft of passing air which could cause problems in the combustion chamber. They are very good heaters...
- Fri Sep 18, 2026 6:16 pm
- Forum: General Land Rover information
- Topic: newb question
- Replies: 2
- Views: 2073
Re: newb question
IIRC all standard S3 parts. All easily available and not too expensive.
Hope the seller has priced it accordingly for you considering it will need work, or it is an obvious barganing point.
Hope the seller has priced it accordingly for you considering it will need work, or it is an obvious barganing point.
- Wed Aug 05, 2026 9:33 am
- Forum: General Land Rover information
- Topic: Ignition timing adjustment
- Replies: 3
- Views: 12154
Re: Ignition timing adjustment
Look down the front of the engine at the crankshaft pulley. You should see a metal plate with 3 pointers just above. There is a notch in the pulley rim which is TDC of the No. 1 cylinder. Rotate the engine with the starting handle until the notch is in line with the 3rd pointer (furthest right) and ...
- Tue Aug 04, 2026 11:54 am
- Forum: General Land Rover information
- Topic: refernce 345581
- Replies: 4
- Views: 11186
- Mon Aug 03, 2026 5:51 pm
- Forum: General Land Rover information
- Topic: refernce 345581
- Replies: 4
- Views: 11186
Re: refernce 345581
Vacuum cleaner hose has been used by some I have heard. Failing that check out different size pond pump hoses or those at caravan spare suppliers.
All much cheaper and I am sure you will find something that will do the job and still look original.
All much cheaper and I am sure you will find something that will do the job and still look original.
- Fri Jul 03, 2026 8:47 am
- Forum: Parts and accessories FOR SALE
- Topic: NATO hitches x 2
- Replies: 0
- Views: 14815
NATO hitches x 2
Not me but a friend who sold his lightweight last year and found these in his garage. He has put them up on EBay: -
NATO hitches
He is open to offers.
Ian
NATO hitches
He is open to offers.
Ian
- Fri Jun 12, 2026 12:23 pm
- Forum: Introductions
- Topic: Afternoon All!
- Replies: 3
- Views: 8664
Re: Afternoon All!
Welcome to the forum Sandy. Those Pug engines are very good and will give you quite a few more MPG. You will probably need ear defenders though !
This forum can be a bit quiet, but posting up any help you need will always get a reply from the knowledgeable.
Ian
This forum can be a bit quiet, but posting up any help you need will always get a reply from the knowledgeable.
Ian
- Thu May 07, 2026 9:55 pm
- Forum: Your Land Rover Projects
- Topic: 10 or 11 tooth?
- Replies: 3
- Views: 9976
- Wed May 06, 2026 9:26 am
- Forum: Your Land Rover Projects
- Topic: 10 or 11 tooth?
- Replies: 3
- Views: 9976
Re: 10 or 11 tooth?
I can't answer your question definately, but as you haven't yet had a more knowledgable reply I will chuck my tuppenceworth in: - I would assume that there will be a difference in diameter and tooth spacing between the two. Chances are; that means it won't mesh properly with the teeth on the ring-ge...