Afternoon all,
New to the forum here but have used it a lot in the past for various bits of help, so thank you! I have a 1973 Series 3 Lightweight.
The front crossmember next to the steering box was plated (quite badly) by a previous owner and has started rotting out again, to the point where the front chassis legs/leaf spring mounts are also being effected by chassis rot. The rest of the chassis is in great condition as I've managed to preserve that.
I was going to replace the front chassis with below, however was wondering if it'd be the same fit. I know I'd need to cut and remount the oil cooler mounts onto the new piece, but would it essentially be the same between the civilian/military models? I know there are other parts of the chassis which are quite different (rear crossmember, gearbox tie-rod, etc) but was unsure about the front end as it's less talked about.
https://www.ebay.co.uk/itm/304378698623 ... media=COPY
Thanks for any help!
Charles
Series 3 Military and Civilian differences
-
rollingrestoration
- Posts: 2
- Joined: Mon Aug 21, 2023 1:51 pm
Re: Series 3 Military and Civilian differences
Good morning,
The latest version of the chassis (inspired by the "Dutch" contract) has triangular reinforcements between the various crosspieces and the side members.
My chassis comes from Richard and for the front, we guess these reinforcements here: https://richardschassis.co.uk/88-d-h-air-portable/
Regards
Looloo
The latest version of the chassis (inspired by the "Dutch" contract) has triangular reinforcements between the various crosspieces and the side members.
My chassis comes from Richard and for the front, we guess these reinforcements here: https://richardschassis.co.uk/88-d-h-air-portable/
Regards
Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)
-
rollingrestoration
- Posts: 2
- Joined: Mon Aug 21, 2023 1:51 pm
Re: Series 3 Military and Civilian differences
Cool, thank you. Looking at pictures it looks like the front is similar and my current chassis has a removable heavy duty bumper, instead of the welded version from Richards, so should work. Guess its a 'buy and try' item and hope it fits!