Will loosely bolt it up hand tight, and remove when it's time to fit the seat box - as I can see it being a pain in the rear to get the box over otherwise.
Right.. today's update:
We decided to take the kids to Silverstone today as it's the British GT and F3 weekend. Had fun for a few hours and then home in time to prep for tomorrow afternoon's work.
After rescuing the dried up gunk tank full of the salt that used to be acid - adding some water and a quick stir turned it back to super strong acid solution in no time.
Into the acid has gone:
1) wheel rim
2) both bulkhead brackets
3) handbrake mechanism (I removed the lower bracket swivel fixing it from the old chassis to go in with the rest of the handbrake lever)
4) 2 x rear brake drums
5) a whole or host of pins, bolts, hub end caps, drive members, nuts and bracketry
In addition the steering box went into white spirit
There are no photos - I'm sure you lot probably draw the line at pictures of grey gunk with metal stuff poking out of it.
How fully tomorrow I can turn some of this stuff into shiny-shiny.
Oh and PS: my dead grinder came back to life!! Hooray!
Have a great evening,
Andy