Lovely to see progress - want to see more...
55HG98. Para Recce Rebuild.
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: 55HG98. Para Recce Rebuild.
Bugger the red lead - when are you going to start getting some green on your Land Rover???
Lovely to see progress - want to see more...
Lovely to see progress - want to see more...
Re: 55HG98. Para Recce Rebuild.
Hiya Fred!
,
I'm not entirely sure when I'll be able to break out the green paint. But, I think I'm still on target to have the vehicle done for the 75th Anniversary meet.
These pics of todays progress are for you mate. I'd forgotten what a time consuming joy XPM is to paint. Can't wait to do the next coat. At least all the other stowage bits are made from easy to paint flat metal.
Thanks must be given to my local council for the workstand, it's an ideal height for painting bonnet baskets.
Regards,
I'm not entirely sure when I'll be able to break out the green paint. But, I think I'm still on target to have the vehicle done for the 75th Anniversary meet.
These pics of todays progress are for you mate. I'd forgotten what a time consuming joy XPM is to paint. Can't wait to do the next coat. At least all the other stowage bits are made from easy to paint flat metal.
Thanks must be given to my local council for the workstand, it's an ideal height for painting bonnet baskets.
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
Re: 55HG98. Para Recce Rebuild.
as long as you use the 240- liter- bucket
Nice to see, that you’re continuing!
Regards, Steve
Nice to see, that you’re continuing!
Regards, Steve
It's supposed to look like that, it's crochet...
Re: 55HG98. Para Recce Rebuild.
I wasn't able to do any project work last weekend, but got a little bit more done today. Finished painting the side panniers so that they can be stored back in the garage once more, without surface rusting occuring.
Still need to do the jerrycan holders, but that will be a job for another day.
Regards,
Still need to do the jerrycan holders, but that will be a job for another day.
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
Re: 55HG98. Para Recce Rebuild.
Today's main effort though, was to carry out some repairs to cracks in the bonnet that I'd tried to repair with lumiweld, but wasn't happy with the results achieved.
This is the extent of the cracking to the left hand side of the bonnet. And this is the crack in the right side. After cutting out the cracks with the Dremel, a wee bit of welding, a rub down to smooth it off, and a coat of primer, the left side now looks like this, And the right side like this. The bonnet looks bent in the pic of the left side, but it's more a trick of the camera and the paint, as there is just a slight curve to it.
I think I might have actually finished repairing the aluminium bits now. But, I said that before, and then a storm blew the tub around the garden.
Regards,
This is the extent of the cracking to the left hand side of the bonnet. And this is the crack in the right side. After cutting out the cracks with the Dremel, a wee bit of welding, a rub down to smooth it off, and a coat of primer, the left side now looks like this, And the right side like this. The bonnet looks bent in the pic of the left side, but it's more a trick of the camera and the paint, as there is just a slight curve to it.
I think I might have actually finished repairing the aluminium bits now. But, I said that before, and then a storm blew the tub around the garden.
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: 55HG98. Para Recce Rebuild.
So what's next?
Is the chassis back yet?
Any engine work being carried out?
We want more!
Is the chassis back yet?
Any engine work being carried out?
We want more!
Re: 55HG98. Para Recce Rebuild.
Good evening,
Today I read the 255 pages of this adventure… Bravo!
I am impressed by your perseverance and the quality of your work; I allow myself to send you my congratulations and my encouragement for the continuation of your project.
Once again, bravo and good luck.
Regards
Looloo
Today I read the 255 pages of this adventure… Bravo!
I am impressed by your perseverance and the quality of your work; I allow myself to send you my congratulations and my encouragement for the continuation of your project.
Once again, bravo and good luck.
Regards
Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)
Re: 55HG98. Para Recce Rebuild.
Blimey Looloo, you're brave reading through this in one sitting. Most of it is drivel and banter between friends, but I will admit to there being a bit of project work included here and there, and I thank you for your kind words.
Hopefully I will be able to get on with the project in the near future as it has been a while since anything meaningful happened. I blame life and circumstances.
,
I meant to reply when I first read your post, and promptly forgot.
Stupid boy!
The chassis has been a question of timing and logistics, which I have so far failed to get aligned since lockdown thwarted the plans in March. I will leave doing anything with the chassis until next year now. As the engine was running nicely when I bought the vehicle I decided that it would be about the only thing I didn't strip down to individual parts. I will be taking the sump of in due course for a good clean out and look into the block, but otherwise it will just be a clean up and a bit of fettling before it gets put back together and dropped back onto the chassis.
With luck I might be able to devote a bit more time to the project in 2021. I'm not saying it will be like the days of old with a whole Sunday devoted to it each week, but I hope to be a bit more active. I couldn't really be less active, could I?
Regards,
Hopefully I will be able to get on with the project in the near future as it has been a while since anything meaningful happened. I blame life and circumstances.
Hiya Fred!
I meant to reply when I first read your post, and promptly forgot.
The chassis has been a question of timing and logistics, which I have so far failed to get aligned since lockdown thwarted the plans in March. I will leave doing anything with the chassis until next year now. As the engine was running nicely when I bought the vehicle I decided that it would be about the only thing I didn't strip down to individual parts. I will be taking the sump of in due course for a good clean out and look into the block, but otherwise it will just be a clean up and a bit of fettling before it gets put back together and dropped back onto the chassis.
With luck I might be able to devote a bit more time to the project in 2021. I'm not saying it will be like the days of old with a whole Sunday devoted to it each week, but I hope to be a bit more active. I couldn't really be less active, could I?
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
Re: 55HG98. Para Recce Rebuild.
In a word, possibly. I have missed our Sunday welding porn issued by you Neil, and I agree with fred, it would be lovely to see some green paint splashed aboutWith luck I might be able to devote a bit more time to the project in 2021. I'm not saying it will be like the days of old with a whole Sunday devoted to it each week, but I hope to be a bit more active. I couldn't really be less active, could I?
Regards
Richard
Discovery Sport
15FM83 ex 15 Para and 7 PO's
Richard
Discovery Sport
15FM83 ex 15 Para and 7 PO's
Re: 55HG98. Para Recce Rebuild.
Learn, re-learn or refresh my English in a fun way with the added bonus of LWT tips: The world is beautiful, the people are nice!
Have a nice week end.
LL

Have a nice week end.
LL
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)