Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Tue Jun 02, 2020 7:15 pm

AR4412 wrote: ↑
Tue Jun 02, 2020 6:38 pm
AR4412 wrote: ↑
Tue Jun 02, 2020 4:24 pm
The ignition barrel internals are also in the Series III 6 way switch. It's just the knob that is different. Pretty sure the electrics on the rear are the same, but can check mine tonight after work.
Just to be safe, I took the nob off my six way switch. The internals are there, and when turned to ignition on, the two central 'ignition' teminals are joined.

Regards,
Thanks Neil, that’s good to know in case Howard doesn’t have spare bits. Any sign of blasters reopening?

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Tue Jun 02, 2020 7:24 pm

Alas not mate. I drove into their yard yesterday whilst on a, ('ahem'), 'roadtest', and unfortunately they're still closed. :cry:

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Tue Jun 02, 2020 7:35 pm

AR4412 wrote: ↑
Tue Jun 02, 2020 7:24 pm
Alas not mate. I drove into their yard yesterday whilst on a, ('ahem'), 'roadtest', and unfortunately they're still closed. :cry:

Regards,
I shall write a strongly worded letter of complaint. Don’t they know there’s a, sorry make that THE Recce to build!?!

Grr

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Jun 05, 2020 10:34 am

So after hunting high and low I am missing one of these nut plates..

A6684E59-B6E7-4B3E-8EF1-E7AE76AF3EF2.jpeg
A6684E59-B6E7-4B3E-8EF1-E7AE76AF3EF2.jpeg (1.17 MiB) Viewed 1522 times

It sits behind the door striker bracket and allows the striker to bolt to it. I can’t find a part number in the IPC, and variously different worded searches on eBay and google have not returned a match. Does anyone know the part number? Even UNF square weld nuts seem to be the stuff of unicorns these days or I would make my own.

I’m sorting door related fittings out while settling in for a long day of work calls, and the missing piece is spoiling the show..

D92BEFB0-B674-45BF-BFEE-52ADCEB92E1F.jpeg
D92BEFB0-B674-45BF-BFEE-52ADCEB92E1F.jpeg (1.01 MiB) Viewed 1522 times

What’s more the new drivers door bottom arrived yesterday, and while it is generally a really nice quality, it was unfortunately damaged (a few dents) so I’m awaiting a replacement. I won’t criticise the supplier as they were very responsive and helpful - in fact I’ll give them a mention if the replacement arrives in good order.. but I was really looking forward to test fitting it this weekend. The trials and tribulations eh. To cap things off, after having ignored them for the last 5 years, I finally noticed yesterday that the interior handle is missing from the near side door lock. How did I miss that?! So another will be ordered, at which point I’ll make a decision on whether to use the entire new mechanism, or just nab the handle off it.

All the best for now, and thanks in advance if you can help with identifying the number for the nut plate.. the challenge is on!!

Andy

User avatar
Dougie2a
Posts: 56
Joined: Tue Sep 15, 2015 11:21 pm
Location: Midlothian

Re: Monty the rather rusty 2A - 37FG31

Post by Dougie2a » Fri Jun 05, 2020 12:19 pm

Hi Andy

Thought i had a spare for you, checked out the spare tub i have lying in my back garden and the nuts on that nut plate are hex in shape - its a series 3. Looked at my 2a and they are same as your looking for. So can't help you, sorry.

Dougie
35 FG 55

1968 2a Lightweight draining my bank balance since 1993


1962 2a 88" adding to the problem since 2020

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Jun 05, 2020 12:49 pm

Dougie2a wrote: ↑
Fri Jun 05, 2020 12:19 pm
Hi Andy

Thought i had a spare for you, checked out the spare tub i have lying in my back garden and the nuts on that nut plate are hex in shape - its a series 3. Looked at my 2a and they are same as your looking for. So can't help you, sorry.

Dougie
Thanks For looking Dougie, appreciate that nonetheless. Amusing that they decided to ‘modernise’ to hex nuts. Maybe they were just cheaper.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Fri Jun 05, 2020 7:00 pm

Hiya Andy! :D ,

The striker bracket nutplate is P/No 346241

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Jun 05, 2020 8:15 pm

AR4412 wrote: ↑
Fri Jun 05, 2020 7:00 pm
Hiya Andy! :D ,

The striker bracket nutplate is P/No 346241

Regards,
Hello matey - thanks for that. They all seem to be hex, but I guess that will do until the real one shows up. It’s got to be wherever I put the other striker plate (which I have since replaced).

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Fri Jun 05, 2020 9:02 pm

andrewjsimpson1977 wrote: ↑
Fri Jun 05, 2020 8:15 pm
They all seem to be hex, but I guess that will do until the real one shows up.
Some people are never happy, no matter how much you help them. :roll:

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Jun 05, 2020 10:46 pm

AR4412 wrote: ↑
Fri Jun 05, 2020 9:02 pm
andrewjsimpson1977 wrote: ↑
Fri Jun 05, 2020 8:15 pm
They all seem to be hex, but I guess that will do until the real one shows up.
Some people are never happy, no matter how much you help them. :roll:

Regards,
😂 No one will ever see them but I’m glad you took the bait mucka.

Post Reply