Page 22 of 23

Re: Rattler's 2a civvy restoration project

Posted: Fri Nov 01, 2019 2:48 pm
by Fossibear
Good success :)

Re: Rattler's 2a civvy restoration project

Posted: Sat Nov 02, 2019 12:32 am
by Cornish Rattler
Fossibear wrote:
Fri Nov 01, 2019 2:48 pm
Good success :)
Cheer's mate :D

Re: Rattler's 2a civvy restoration project

Posted: Sat Nov 02, 2019 9:40 am
by AR4412
Fingers crossed for the MOT Graham.

Regards,

Re: Rattler's 2a civvy restoration project

Posted: Sat Nov 02, 2019 3:19 pm
by Sidders101
Hi Graham..just a bit of info that might help you (or not) The handbrake lever.....looks to me like its a tad too low in the slot..if it hits the bottom of the slot you need to loosen the 2x 9/16ths bolts/nuts that holds the H/B bracket onto the chassis..there is a fair bit of movement to be had in the vertical which will bring the whole lever assembly upwards thus stopping the lever from fouling the slot in the seat base & also prelonging the life expectancy of the (now less) pulled rubber gaiter.

Re: Rattler's 2a civvy restoration project

Posted: Sat Nov 02, 2019 5:37 pm
by Cornish Rattler
Sidders101 wrote:
Sat Nov 02, 2019 3:19 pm
Hi Graham..just a bit of info that might help you (or not) The handbrake lever.....looks to me like its a tad too low in the slot..if it hits the bottom of the slot you need to loosen the 2x 9/16ths bolts/nuts that holds the H/B bracket onto the chassis..there is a fair bit of movement to be had in the vertical which will bring the whole lever assembly upwards thus stopping the lever from fouling the slot in the seat base & also prelonging the life expectancy of the (now less) pulled rubber gaiter.
Spot on with that yes it is resting on the gator when in the off position so will have a look at that ;)

Re: Rattler's 2a civvy restoration project

Posted: Sat Nov 02, 2019 5:38 pm
by Cornish Rattler
Yippee it passed :D X! :D X! :D X! :D X!

Re: Rattler's 2a civvy restoration project

Posted: Sat Nov 02, 2019 7:09 pm
by removeduser185
Cornish Rattler wrote:
Sat Nov 02, 2019 5:38 pm
Yippee it passed :D X! :D X! :D X! :D X!
Congratulations! Well done!

Re: Rattler's 2a civvy restoration project

Posted: Sat Nov 02, 2019 7:40 pm
by Fossibear
Congratulations :D

Steve

Re: Rattler's 2a civvy restoration project

Posted: Sat Nov 02, 2019 7:57 pm
by AR4412
:D X!

Congratulations.

Regards,

Re: Rattler's 2a civvy restoration project

Posted: Sat Nov 02, 2019 11:21 pm
by Sidders101
Great result for all your hard work.