Berthas lightweight rebuild

[Rubregis]

One question as defo I'll be trying to lift the engine out as i couldn't do it ladt weekend is i know i need to take the bellhousing off what size bolts do i need to mount the engine on the engine stand? Many thanks for your information

[diffwhine]

The threads are 5/16" UNF (same thread as prop shaft bolts). They need to be a hard bolt, not some cheap fixing. I find that body mounting bolts from Discovery 1 or Range Rover Classic work well although you will need to space them out so as not to over tighten them into the block. The depth is critical.
I assume you mean the flywheel and flywheel housing off rather than the bell housing? The bell housing should be coming out as part of the gearbox.

[Rubregis]

Cheers I've used bumper bolts correct size which I got from Jake Wright's I'll soon be putting the head back on so that I can replace the rear oil seal . sorry for the late reply I find this forum sometimes difficult to use