Airportable 24V electrical cut-off isolator lever.

Any Land Rover related info can be posted here.
Post Reply
DocZip
Posts: 3
Joined: Wed Sep 16, 2026 2:59 pm

Airportable 24V electrical cut-off isolator lever.

Post by DocZip » Wed Sep 23, 2026 11:54 am

Greetings from Suffolk.
I recently purchased a rather nice 1980 Series III 24V half-ton airportable and recently managed to find a reprint of the military user manual.
However, mine has a battery cut-off switch, located just beneath and in front of the passenger seat, which has a lever that can be turned either on or off and removed when set to the off position. No mention of this feature is made in the user guide and I have been unable to find any reference to it on-line.
Does anyone have any useful information and where I might be able to purchase a spare such lever, just in case...
Also, mine lacks the twin ammeters usually located to the left of the instrument panel, as well as the rotary lights switch. No bumperettes either.
With thanks in advance.
Dr. Zip.

Ridgy
Pastry Chef
Posts: 677
Joined: Fri Oct 03, 2014 12:35 pm
Location: Essex

Re: Airportable 24V electrical cut-off isolator lever.

Post by Ridgy » Wed Sep 23, 2026 7:50 pm

Hi, welcome to the forum and to the world of lightweight ownership.

I'm not an FFR expert but could be something a previous owner has fitted.....this sort of thing? Pictures are always handy if you can upload them. https://www.vehiclewiringproducts.co.uk ... -isolators

What year is yours? I think i might be right in saying that very late ones didn't have bumperettes.....mine didn't when I bought it but to me it looked wrong without them.

Cheers

Steve
57 KB 58 1983 SIII GS Lightweight

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Airportable 24V electrical cut-off isolator lever.

Post by AR4412 » Wed Sep 23, 2026 8:02 pm

Hi, and welcome to the forum.

Feel free to add some pics of your truck if you wish to. We like piccies we do. And cake.

The battery cut off switch is probably a P.O. addition as they weren't fitted in service. You don't say what type of switch is fitted, of an all metal or plastic construction, or whether the key is a metal or a plastic one. But, replacement keys are available. Google is you friend here, just find one to match your existing one.

You don't give the vehicles military VRN, but if it is a 1980 vehicle it would have a single ammeter in the shunt box mounted between the seats, as opposed to the twin ammeters in the dash that the earlier vehicles had.

Replacement six way lighting switches are available, but they're not cheap and tend to be of the later design from the 90/110, with different connectors on the back. Old style Series ones can be found second hand, but might not be in the best of condition. Check the condition of the wiring behind the dash before purchasing a switch that you might not be able to plumb in.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

DocZip
Posts: 3
Joined: Wed Sep 16, 2026 2:59 pm

Re: Airportable 24V electrical cut-off isolator lever.

Post by DocZip » Thu Sep 24, 2026 11:07 am

I thank you for your welcome and replies, much appreciated.
1980 S.3: 53HG78.
The battery cut-off isolator switch is a metal lever, around 3" long, with a right-angle bend and a bayonet latch fitting in to the switch itself, to permit removal.
I have not seen another such vehicle with one.
Indeed, there is an electrical shunt box located between the seats, with a single ammeter and what I assume is a test button.
With best wishes,
Dr. Zip.

User avatar
fv1620
Bake Off Judge
Posts: 2268
Joined: Thu Oct 06, 2011 2:16 pm
Location: GB-CMN (formerly UK91)
Contact:

Re: Airportable 24V electrical cut-off isolator lever.

Post by fv1620 » Thu Sep 24, 2026 11:26 am

DZ you won't have twin ammeters on the dash as you have a later installation with a single ammeter (& therefore single shunt).

The button is just to turn on illumination for the ammeter. Incidentally this ammeter merely shows the rate of charge for the radio batteries. It does not measure discharge from the radio batteries as it is only wired into the alternator feed to the batteries, so it is not centre zero reading unlike the earlier ammeters used on the dash.

Always make certain that if you have no radio batteries attached that you insulate the battery cable terminals from each other and earth. Otherwise you will blow the large fuse in the shunt box.
Clive Elliott

Collecting military technical publications, researching into military vehicle electrical systems, licensed radio amateur since 1964 using microwave bands for tropospheric scatter.

DocZip
Posts: 3
Joined: Wed Sep 16, 2026 2:59 pm

Re: Airportable 24V electrical cut-off isolator lever.

Post by DocZip » Fri Sep 25, 2026 11:48 am

The beast, "Winny":-
006.JPG
006.JPG (384.05 KiB) Viewed 5788 times
005.JPG
005.JPG (228.91 KiB) Viewed 5788 times

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Airportable 24V electrical cut-off isolator lever.

Post by AR4412 » Sat Sep 26, 2026 10:37 am

Thats a nice straight looking truck. Thanks for sharing the pics of it.

Built under the same contract as mine. So in theory, it should be the exactly the same from the factory.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

Post Reply