E10 Petrol

Any Land Rover related info can be posted here.
Post Reply
57Kb17
Posts: 49
Joined: Fri Dec 11, 2015 10:35 pm

E10 Petrol

Post by 57Kb17 » Wed Sep 01, 2021 10:18 am

Hi, has anyone any thoughts about this E10 fuel that is now arriving at filling stations and how it might effect our lightweights. All the best Adrian.

G0TBI
Posts: 73
Joined: Thu Feb 27, 2020 11:18 am

Re: E10 Petrol

Post by G0TBI » Wed Sep 01, 2021 12:14 pm

Looking with interest on this one as I put some in at sainsbury's Dunchurch two days ago whilst attending Firepower show, great time BTW


Stuart
53HG64

Ludo
Posts: 27
Joined: Sat Jul 10, 2021 3:43 pm

Re: E10 Petrol

Post by Ludo » Wed Sep 01, 2021 12:19 pm

57Kb17 wrote: ↑
Wed Sep 01, 2021 10:18 am
Hi, has anyone any thoughts about this E10 fuel that is now arriving at filling stations and how it might effect our lightweights. All the best Adrian.
I've been discussing this one with a few lwt groups on Facebook - the general consensus is most people will switch to super unleaded while that is still available.

A lot of people also raised that the half ton is designed to operate on dreadful quality fuel in war torn countries, so you'd hope E10 wouldn't be the thing to defeat it :lol:

Me personally, my half ton is still configured to run on leaded fuel, so I have to dose my tank with additive every time - rightly or wrongly, I'm hoping that will offer some level of protection, even if I do start running on E10....

mrick
Posts: 57
Joined: Fri Jun 08, 2018 9:48 pm

Re: E10 Petrol

Post by mrick » Fri Sep 03, 2021 9:15 am

But will the additive that "unleaded" petrol Lightweights require be compatible with "Super Unleaded" (while it's still available...)?

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: E10 Petrol

Post by AR4412 » Fri Sep 03, 2021 10:24 am

I do hope so as I've been using it since LRP was withdrawn from sale. I've been using it with regular 95, and 99 Super Unleaded, & my motors don't appear to have suffered from its use.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

airportableffr
Posts: 104
Joined: Tue Apr 24, 2018 9:56 am

Re: E10 Petrol

Post by airportableffr » Fri Sep 03, 2021 10:54 pm

I believe that while the engine will run on E10 the problem is it is more corrosive than previous fuels. It can damage older rubber such as seals and hoses, and other materials. This could lead to them failing at some point but before that there is a risk of them breaking down and bits ending up blocking the carburetor jets. Off the top of my head that would be the fuel lines, fuel pump diaphram, carb seals. Perhaps classic car parts suppliers will produce E10 resistant parts as you get in newer cars?

I

simonm
Posts: 26
Joined: Sun Jan 14, 2018 7:02 pm
Location: France

Re: E10 Petrol

Post by simonm » Mon Sep 06, 2021 5:51 pm

There was a good article in Land Rover Owner, Oct issue about effects of E10 on Land Rovers

To sumerise:

1, E10 is 10% Ethanol. (Normal Petrol has min 5%)
Ethanol is hydroscopic, which means if you leave it in your fuel tank it will rust it. As I LW owner chances are your fuel tank is already rusted, so its been treated with a tank liner should be ok

Fuel pipes need to be new R6 or R9 Spec.
Seals like cork degrade quickly, can be replaced easily.
Plastic items as well

Carbs you can get new seals and floats from burlen.co.uk (i have not checked)

Otherwise should not be a problem. In France E10 has been available for a long time and now we have E85 which is 85% Ethanol. But is 50% of the price of Normal unleaded.

anyway check our LRO

All the best Simon
Lightweight GS series 3. 1976 - ex Saudi National Guard
Defender 90 2005
Defender 130 Pulse Ambulance 1998.
Sankey Wide Track 1985 Ex Royal Artillery

CagedAirPotable
Posts: 5
Joined: Fri Jul 03, 2020 8:57 pm
Location: Lincs PE23

Re: E10 Petrol

Post by CagedAirPotable » Thu Sep 17, 2026 1:21 pm

As a forum 'relative newbie', but with experience as an aerospace engineer and chemistry, on the subject of E10:

The Ethanol in 'E' fuels acts as a quite different type of solvent to Petroleum, which makes the task of finding materials that are resistant to both of these components quite difficult.

Perfluorocarbon (FFKM) is the only known material resistant to high levels of either Ethanol or Petroleum. However, my own research finds that the FFKM items available today are extremely expensive, often can only be ordered in large batches and doesn't bring the price down sufficiently to render them a popular cost effective choice for our motors.

Fluorocarbon (FKM) materials often with a brand name such as 'Viton' (made by DuPont) are available as o-ring and in sheet form and will withstand the 10% Ethanol content in E10 Petrol with reasonable life expectancy. There are many more sizes of FKM o-ring available than for FFKM and at reasonable cost without bulk ordering.
Typical example: https://ebay.io/m/xjvRJR

Ethanol will attack cork seals such as that used in the fuel tank change-over tap in Land Rovers with twin fuel tanks. Mine has just succumbed after 46 years in service with only the last 5 handling E10 Petrol.
Concurrently I observed that my Zenith floats 'sank', aged 45 yrs with just four years handling E10. Whilst this is not a conclusion that E10 was the cause, it is nonetheless my own suspicion.

I have a question based on the above for forum members:
Does anyone know if the Zenith Carb used in the series 3 Land Rover petrol models ever possessed a brass float, or indeed are otherwise available?

Has anyone else yet fallen foul of Fuel tank change-over tap leakage whist running with E10? I may have a solution in the near future based on the amount of interest.

Post Reply