24V FFR Welding: electrical system prep

If you have encountered or solved a problem post here
Post Reply
ScarboroughSeadog
Posts: 7
Joined: Tue Mar 07, 2023 4:06 pm

24V FFR Welding: electrical system prep

Post by ScarboroughSeadog » Tue Feb 17, 2026 11:37 am

I need to replace the chassis outriggers under the footwells.

The seat box warning plate advises to disconnect the batteries (at + and - terminals presumably) and the generator before welding. I'm loath to disconnect the generator for various reasons, but if this is absolutely necessary then presumably it has to be done at the genny connection (not at the panel)?

Various advice is that so long as the weld clamp (earth) is right next to the part being welded, then disconnection is not required.

Grateful for advice on that point specifically (I won't be doing the welding, but the welder may not be familiar with the FFR set up)

Thanks

finnbear270
Posts: 26
Joined: Tue Feb 10, 2026 11:00 am

Re: 24V FFR Welding: electrical system prep

Post by finnbear270 » Tue Feb 17, 2026 12:23 pm

I am a retired welder, having had many years experience on all sorts of stuff, Incl from warships to lawnmowers, :lol: as to vehicles, the comment "get the earth clamp as close as you can", if not on the part being welded. I have never had a problem with this way of working, That said, I wouldn't be doing such on anything modern such as Beemers / Audi or similar. :)

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 24V FFR Welding: electrical system prep

Post by AR4412 » Tue Feb 17, 2026 2:08 pm

Just removing the battery negative lead will suffice, no need to unplug the generator to carry out any welding.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

ScarboroughSeadog
Posts: 7
Joined: Tue Mar 07, 2023 4:06 pm

Re: 24V FFR Welding: electrical system prep

Post by ScarboroughSeadog » Tue Feb 17, 2026 3:26 pm

Great stuff- thanks both.

sickpup
Posts: 48
Joined: Fri Jan 02, 2015 12:43 am

Re: 24V FFR Welding: electrical system prep

Post by sickpup » Fri Jul 31, 2026 10:10 am

AR4412 wrote: ↑
Tue Feb 17, 2026 2:08 pm
Just removing the battery negative lead will suffice, no need to unplug the generator to carry out any welding.

Regards,
Glad you said that. I forgot to disconnect the generator the last time I welded and was worried about that.
I hope you're right :oops:

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 24V FFR Welding: electrical system prep

Post by AR4412 » Fri Jul 31, 2026 7:50 pm

I haven't fried any alternators or generators yet. There's time yet mind you, I'm still relatively young.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

sickpup
Posts: 48
Joined: Fri Jan 02, 2015 12:43 am

Re: 24V FFR Welding: electrical system prep

Post by sickpup » Sun Aug 02, 2026 9:44 am

Thank you for that confident comment :lol:

Post Reply