Which Distributor & Ballast Resistor
Which Distributor & Ballast Resistor
Evening, I am just trying to figure out which type of distributor I have on my 1979 12v and if it has a ballast resistor, as I can’t find one and only one of the positive terminals is connected on the coil. Thinking of buying the Lumenition optical units with their coil. Any help much appreciated. Regards Mark
- Attachments
-
- IMG_0578.png (2.34 MiB) Viewed 8460 times
-
- IMG_5448.jpeg (126.96 KiB) Viewed 8460 times
09GT01 s111 1979 12v Ex - 30 Sig Regt / 21 Sig Regt / 31 Sig Regt (v) / 39 Sig Regt (v)
Mark
Mark
Re: Which Distributor & Ballast Resistor
Thats a Ducellier distributor. Most easily identified by the capacitor on the outside.
You won't have a ballast resistor as the standard coil has resistance built in.
If you buy a lumenition unit together with Lumenition coil, then I would think they should be compatible.
HTH
Ian
You won't have a ballast resistor as the standard coil has resistance built in.
If you buy a lumenition unit together with Lumenition coil, then I would think they should be compatible.
HTH
Ian
"I'm sorry for the man who hears the pipes, and who wisnae born in Scotland."
Re: Which Distributor & Ballast Resistor
Thanks Ian
09GT01 s111 1979 12v Ex - 30 Sig Regt / 21 Sig Regt / 31 Sig Regt (v) / 39 Sig Regt (v)
Mark
Mark
Re: Which Distributor & Ballast Resistor
I suggest fitting electronic ignition to your Ducellier as I did about 12 years ago. It was from a firm with the odd name of 'SimonBBC', which has become or now appears to be operating as Powerspark Ignition Ltd. No need for a ballaast resistor and I have used a standard 12 v coil with it. Highly recommended as it is hidden under the dizzy cap. I have no connection to the firm or owner.
Re: Which Distributor & Ballast Resistor
Electronic ignition is definately a good thing but always, always, carry your old points and condeser (known good ones, not cheap ones off e-bay) just in case.
"I'm sorry for the man who hears the pipes, and who wisnae born in Scotland."