I believe the kids call this flexing.
Might have a go at 3d printing a replacement rubber gasket for the lenses as I'm missing one.
Now to actually put the vehicle together...
IR kit
Re: IR kit
Very nice , don’t know what flexing is 
Airportable 55HG89
TUL 90 LL30AA
TUM 110 KJ84AA
Harley Davidson MT 350 GJ01AA
Sankey Trailer 21KA71
TUL 90 LL30AA
TUM 110 KJ84AA
Harley Davidson MT 350 GJ01AA
Sankey Trailer 21KA71
- fv1620
- Bake Off Judge
- Posts: 2268
- Joined: Thu Oct 06, 2011 2:16 pm
- Location: GB-CMN (formerly UK91)
- Contact:
Re: IR kit
I had to look up what flexing is, but nothing wrong with displaying your treasures.
As you probably realise the rubber seal is not to keep water out but to keep the white light in.
When fitted on the headlights with your hand you will feel the warm glow of the IR energy. Be wary of starring at the glow of the filament, although you cannot see the IR energy it seems unwise to allow that energy to dissipate in your eyeball. Only view the filament obliquely in the same way that you would view a headlight without the filter, you would not stare at the full beam directly into your eye.
Don't be disappointed if you hold your torch behind a filter & see nothing. A modern LED torch is designed to only emit visible light, anything in the IR spectrum is wasted energy. You can of course get IR torches that only emit IR but it is easy to leave them on & not realise you have flattened the battery with the attendant risk of fire as it can get very hot.
Many phone cameras have sensitivity that extends into the IR spectrum so after dark it might be fun to turn on the headlights with the filters on & see the invisible beam on your phone.
I once did drive my LtWt off-road under IR illumination although I was using WW2 Tabby binoculars. It was very scary & it gave a very tunnel vision view & I got no appreciation of lateral vision & the pitfalls & obstacles lurking there.
As you probably realise the rubber seal is not to keep water out but to keep the white light in.
When fitted on the headlights with your hand you will feel the warm glow of the IR energy. Be wary of starring at the glow of the filament, although you cannot see the IR energy it seems unwise to allow that energy to dissipate in your eyeball. Only view the filament obliquely in the same way that you would view a headlight without the filter, you would not stare at the full beam directly into your eye.
Don't be disappointed if you hold your torch behind a filter & see nothing. A modern LED torch is designed to only emit visible light, anything in the IR spectrum is wasted energy. You can of course get IR torches that only emit IR but it is easy to leave them on & not realise you have flattened the battery with the attendant risk of fire as it can get very hot.
Many phone cameras have sensitivity that extends into the IR spectrum so after dark it might be fun to turn on the headlights with the filters on & see the invisible beam on your phone.
I once did drive my LtWt off-road under IR illumination although I was using WW2 Tabby binoculars. It was very scary & it gave a very tunnel vision view & I got no appreciation of lateral vision & the pitfalls & obstacles lurking there.
Clive Elliott
Collecting military technical publications, researching into military vehicle electrical systems, licensed radio amateur since 1964 using microwave bands for tropospheric scatter.
Collecting military technical publications, researching into military vehicle electrical systems, licensed radio amateur since 1964 using microwave bands for tropospheric scatter.
Re: IR kit
That's fascinating Clive, thanks for the warning.
Will definitely give the lenses a go this evening then and see what happens.
Will definitely give the lenses a go this evening then and see what happens.
1968 Rover 1 LWT
1969 2A Mystery Machine
1969 2A Mystery Machine
- fv1620
- Bake Off Judge
- Posts: 2268
- Joined: Thu Oct 06, 2011 2:16 pm
- Location: GB-CMN (formerly UK91)
- Contact:
Re: IR kit
This is rather later technology, these are the IR LED clusters on one side of my Wolf after dark. They would be much brighter than this in real IR, but it shows that the phone camera can respond a bit of the way into the IR spectrum.
So you should get something from yours & probably brighter because you will notice there is quite a bit of visible red in close proximity. This was not a disadvantage this was expected from the design of the early filters which probably made them easier to manufacture & a bit of low level red was seen as an advantage. During WW2 codeword for such a system was Tabby but prior to 1942 it was called RG Equipment (as in Red Glass).
So you should get something from yours & probably brighter because you will notice there is quite a bit of visible red in close proximity. This was not a disadvantage this was expected from the design of the early filters which probably made them easier to manufacture & a bit of low level red was seen as an advantage. During WW2 codeword for such a system was Tabby but prior to 1942 it was called RG Equipment (as in Red Glass).
Clive Elliott
Collecting military technical publications, researching into military vehicle electrical systems, licensed radio amateur since 1964 using microwave bands for tropospheric scatter.
Collecting military technical publications, researching into military vehicle electrical systems, licensed radio amateur since 1964 using microwave bands for tropospheric scatter.