Yep! A good day.
23HF14
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: 23HF14
You're quite right Bob! But then, I don't suppose there is anything else I am likely to drive nearly 500 miles to get! Don't they look splendid! Still with their labels on! I just hope that, now I have 8 NOS tyres I can find a set of 5 which will be strong enough to fit - difficult to tell as, of course, they must be quite old - that having been said, they all look and feel excellent. So, yes, really pleased and most grateful to Neil
for spotting them for me on MILWEB - I look at MILWEB most days, but missed them! The seller bought them for his Champ before realising they were a size too small! Now, I need to clean prep and respray the rims I already have and get my old wheels on eBay.
Yep! A good day.
Yep! A good day.
Re: 23HF14
Hiya Fred!
,
I'm glad that you got the tyres mate, happy to have helped in a small way, From the pics on Milweb they looked good, so hopefully they will serve you well.
Regards,
I'm glad that you got the tyres mate, happy to have helped in a small way, From the pics on Milweb they looked good, so hopefully they will serve you well.
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
Re: 23HF14
Lovely Tyres Fred, they're minters, well worth the 500 mile rounder.
Bet you cannot wait to get them on your wagon and listen to that lovely whine they make at speed.
Regards
Bob
Bet you cannot wait to get them on your wagon and listen to that lovely whine they make at speed.
Regards
Bob
042Bobf
19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.
19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.
- fv1620
- Bake Off Judge
- Posts: 2268
- Joined: Thu Oct 06, 2011 2:16 pm
- Location: GB-CMN (formerly UK91)
- Contact:
Re: 23HF14
Fred I'm sure you must be savouring the smell of rubber & those little pointy bits you get on a new tyre, with a degree of satisfaction on a nice acquisition that many must be envying. Well done!
Clive Elliott
Collecting military technical publications, researching into military vehicle electrical systems, licensed radio amateur since 1964 using microwave bands for tropospheric scatter.
Collecting military technical publications, researching into military vehicle electrical systems, licensed radio amateur since 1964 using microwave bands for tropospheric scatter.
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: 23HF14
Many thanks for the encouragement and positive reactions, chaps. Yes, I'm pretty pleased as I now have a full set and three NOS spares, plus 5 others - the ones on the rims (of course). It will be my later-in-the-year project: I have to add a window to my wife's shed first and sort out a bathroom, but, I'll be on it soon!
Re: 23HF14
Tyres look good, will only look better on wheels!
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: 23HF14
Many thanks, Graham, how's your Lightweight these days?
Today I decided to fix the leaking NSF hub. It has been sweating oil for a while, nothing major, but I could do without it. It was the joint between the hub and the backplate. Fortnately, I could tighten the nuts without having to take the backplate (and the driving member etc) off. I just hope that tightening the nuts which were a bit "softly" done up, will do the trick. I topped up the hub oil and I hope all will be well. As you can see, it was a trifle warm in the garage.
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: 23HF14
It can be a bit complicated to assemble the headlamps correctly, so here is a guide to how to do it. Everything is slightly offset, so you can't actually get it together incorrectly, but, even so, it is useful to mark the top of each component so as to make it easier when fiddling. First of all, you have this set up which is the lamp holder with its three adjusters. This has a rubber seal between it and the wing. It is held in place by the three crosshead screws shown. This one has a modern halogen bulb connector block, but the same applies to the standard military original.
When you take the headlamp off, it looks like this from the back:
There are actually four rings: the top one which you can see is green and isn't attached to the others by anything, but, note the elongated holes shaped like keyholes align with those on the brass ring which actually fit over the three adjusters - in this photo, the green ring is slightly off so not showing that quite as well as I'd have liked.
This shows the green ring removed from both sides - this photo shows how it appears on the vehicle when viewed in place. I'll now do another post to continue as I need more space for the photos.
When you take the headlamp off, it looks like this from the back:
There are actually four rings: the top one which you can see is green and isn't attached to the others by anything, but, note the elongated holes shaped like keyholes align with those on the brass ring which actually fit over the three adjusters - in this photo, the green ring is slightly off so not showing that quite as well as I'd have liked.
This shows the green ring removed from both sides - this photo shows how it appears on the vehicle when viewed in place. I'll now do another post to continue as I need more space for the photos.
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: 23HF14
PART TWO
With the green ring off you can now see the rear of the light fitting with the three remaining rings:
The brass-coloured one is attached to one of the two black rings with three small self tappers and the bottom black ring is attached with the three "L" shaped cast nuts which we#ll see in a moment.
That is all attached like this:
You can see the self tappers and one of the "L" shaped fixings.
This photo shows one of them undone and you can see clearly the two black rings.
And the fasteners themselves
Off to part three!
With the green ring off you can now see the rear of the light fitting with the three remaining rings:
The brass-coloured one is attached to one of the two black rings with three small self tappers and the bottom black ring is attached with the three "L" shaped cast nuts which we#ll see in a moment.
That is all attached like this:
You can see the self tappers and one of the "L" shaped fixings.
This photo shows one of them undone and you can see clearly the two black rings.
And the fasteners themselves
Off to part three!