Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon Jul 15, 2019 7:11 pm

AR4412 wrote: ↑
Mon Jul 15, 2019 7:01 pm
Hiya Andy! :D ,

Happy to see that you got the steering relay back together without loosing an eyebrow.

Regards,
Those Brothers Grimm style tales of spring loaded woe..it's all a great big lie to keep us all oppressed and controlled by the government Neil... you know... like monsters under your bed or clowns in the sewers..

THEY WANT YOU TO BE SCARED

Go on..smash the system! Rebuild a relay and show them you won't be kept down any more! Grrrrrr!

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Mon Jul 15, 2019 7:14 pm

:lol:

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

Jon S
Posts: 452
Joined: Sun Jun 14, 2015 10:01 am

Re: Monty the rather rusty 2A - 37FG31

Post by Jon S » Mon Jul 15, 2019 8:46 pm

Hi Andy

Of course I have the joy of removing the relay from the chassis in the first place to look forward to! I picked up a spare one at a jumble so will fill with the correct amount of oil and leave it to see if it leaks. (Giving the shaft a regular turn to move it to a different sealing area). If ok it may save me some time later. Currently looking at starting the resto in the Autumn, now that I have somewhere undercover to work on it.

Won't set any completion goals, as what ever I predict will no doubt turn out to be complete fantasy! At least it has been on the road until earlier this year, so feeling reasonably positive at the prospect at this stage. What could possibly go wrong?

Regards

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon Jul 15, 2019 10:05 pm

Jon S wrote: ↑
Mon Jul 15, 2019 8:46 pm

What could possibly go wrong?

Regards
You actually said that out loud :lol:

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Mon Jul 15, 2019 10:23 pm

I rebuilt one using a home-made compressor which worked fine. But, unfortunately, having got the old shaft into the new casing, I discovered that it was damaged. But, if anyone is in need of a NOS casing, I have one. As for leaking, I am told that the steering relay is perfect for "one-shot" grease rather than oil. Using one-shot in the hubs is contentious as it won't spray up onto the bearings at the top, but, in the relay it should be fine.

This was mine - rather Heath Robinson, but it worked.
rebuilt steering relay 1.JPG
rebuilt steering relay 1.JPG (1.17 MiB) Viewed 2404 times
If you look closely you can see that the end of the shaft is damaged. I didn't of course, at the time!

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jul 21, 2019 9:27 am

I’ve been there with other parts Fred - most annoying when you’ve put the time in, only to notice a calamity right when you want to fit the finished article.

This weekend i’ve been at a family friendly music and comedy festival with Sara and the kids. Here’s a shot of the miserable buggers behind me yesterday.

A3DE301B-9371-4420-8243-E812F41FEB70.jpeg
A3DE301B-9371-4420-8243-E812F41FEB70.jpeg (711.66 KiB) Viewed 2338 times
Not a single smiling face. Obviously they had enjoyed less of the cider than I had :D

So... while I’m enjoying the last morning of Latitude Festival, I remembered I had saved up a couple of photos of the brake pedal tower going back together, replete with shiny new bushes:

944F6F6E-9146-47F5-AB5D-ECFD2EBDAC0D.jpeg
944F6F6E-9146-47F5-AB5D-ECFD2EBDAC0D.jpeg (746.81 KiB) Viewed 2338 times

The pedal shaft is a replacement, as I had to drill both the clutch and brake ones out.

ED9EFF4F-F11F-4633-B512-654236073A29.jpeg
ED9EFF4F-F11F-4633-B512-654236073A29.jpeg (1.25 MiB) Viewed 2338 times
64B3FA5D-6217-43CC-B6DF-B9BDE31CAE4D.jpeg
64B3FA5D-6217-43CC-B6DF-B9BDE31CAE4D.jpeg (1.08 MiB) Viewed 2338 times

Will be back home on the range next week, when hopefully I can get the steering relay fitted to the chassis, and crack on with the bulkhead because the welder parts have arrived!

All the best from the fest,

Cheers :!

Andy

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jul 28, 2019 9:35 pm

Right so after a mostly family time weekend, I managed to repair my welder and do a bit of a test weld on a smaller bit.. that orrible gearstick.

I had bought a replacement on the bay of e, but when It arrived I realised that while it was a double kink, it wasn’t quite as double kinky as the original double kink, and besides it doesn’t have a threaded top.

It did however have a much better castle thingy than the original gouged number:

CC952862-BC9E-4A5D-818A-D5E74E8323A3.jpeg
CC952862-BC9E-4A5D-818A-D5E74E8323A3.jpeg (904.61 KiB) Viewed 2216 times

I decided that rather than over-kink the less kinky stick, and preferring not to have to cut a thread into the top of it, I would fix the old one properly. First the previous owner’s repair was ground off, along with a channel around the circumference at the base just above where the stick meets the ball. This allowed me to bend and manipulate the stick to correct for the fact that:

a) It was bent over to the passenger side, meaning I’d have to be Larry Longarms to reach reverse gear

and

b) It was also sloping backwards too much above the ball section.

I couldn’t really get this combined misalignment to show up on camera, but trust me it looked a sight.

Weld ground off and stick ground thinner to aid bending:

8B74CFA7-EECC-4C82-8DF9-55A03E7958FE.jpeg
8B74CFA7-EECC-4C82-8DF9-55A03E7958FE.jpeg (932.16 KiB) Viewed 2216 times

Stick straightened, welded up, evaporust-dipped and given a coat of paint:

9A59C808-BAED-4211-99C8-FFE788D52B52.jpeg
9A59C808-BAED-4211-99C8-FFE788D52B52.jpeg (658.04 KiB) Viewed 2216 times

Other bits ready to go on:

D7F4787E-ED97-4BB7-BD85-AADE318B7F05.jpeg
D7F4787E-ED97-4BB7-BD85-AADE318B7F05.jpeg (1.77 MiB) Viewed 2216 times

I’ve also stripped, dipped and painted the bracket that mounts it all to the top of the gearbox, but there's an image limit, and I’m not doing a whole extra page just for that so you’ll have to imagine it :P

I also cleaned up and painted the longitudinal steering rod but you can wait to see that until it has its rod ends fitted. We are not, after all, animals.

...and so, with excuses exhausted and welder fixed, the very next job will be some bulkhead welding! Yaaaaay!..... Hello? Is anyone still out there? Ah shucks.

All the best,

Andy

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Mon Jul 29, 2019 12:46 am

That's a precision bit of work there on the gear stick! Looks great!. Do you have the grub screw which goes in the side of the alloy turret? Originally, mine had been replaced with a bolt, but that fouls the rubber gaiter.

I forgot to comment on the cheerful crowd at the music festival. What sort of festival was it, a wake?

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Mon Jul 29, 2019 7:45 am

The miserable look is because that's the queue for the bogs Fred.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon Jul 29, 2019 8:40 am

AR4412 wrote: ↑
Mon Jul 29, 2019 7:45 am
The miserable look is because that's the queue for the bogs Fred.

Regards,
I think it was more because they were stood behind my kids Neil :?

Fred - the new castle / turret thing came with a bolt and lock nut, where someone had ground the end of the bolt into a pin. Thankfully when I stripped the unit that came with the landy, the original grub screw was floating about in the grease inside. The thread on the new turret seems to have survived unscathed so it seems. The PO was thoughtful, or perhaps lazy enough to find a bolt which has the same thread.

As regards precision - well it’s not all that really... I just ran the grinder around the base, bent the stick for a few minutes until it sat right, and then went round the circumference with the MIG blobbing liquid metal in the gap and building it up a little. The rest is Rob’s School of welding: grind it back until it looks pretty. I’ve left the end of the stick fluted where it meets the ball, in the hope it is stronger than the original.

What a lot of shenanigans over a simple gearstick eh.

Andy

Post Reply