Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Mon May 27, 2019 9:38 am

Always good to have a spare mate. I looked at it and thought, 'That's an FFR idler bracket.' , then remembered yours doesn't have one of those, but does have a dynamo. And I only thought that as I was looking at the dynamo on Martin's IIA when having a wing lean chat on Saturday.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon May 27, 2019 8:42 pm

No such thing as a day off for the professionals eh Neil. Do you see Lightweight engine bays in your sleep? :lol:

So.. after a hasty drive back from visiting my good lady’s family in Staffordshire, this afternoon I got a couple of hours at home on my own. It was one of those times when a long list of ‘to do’ is only chipped into, due to the lateness of the hour and the soreness of the bones. Man I’m tired this week. Must be the system shock from the first couple of weeks back in work.

Aaaanyway, waffling over.. time for photos :D

First job was to finish cleaning up the two side upright support brackets for the seat back, and get them into primer:

2AAD1764-2369-4F1B-B4BA-2A3EBDAE7B0F.jpeg
2AAD1764-2369-4F1B-B4BA-2A3EBDAE7B0F.jpeg (1008.01 KiB) Viewed 2071 times

..then rivet them in place. Annoyingly I have misplaced my air riveter, so it was back to the skin pinching joys of the manual gun:

CF3423A6-E2B4-4EE1-A160-524040F82F67.jpeg
CF3423A6-E2B4-4EE1-A160-524040F82F67.jpeg (601.4 KiB) Viewed 2071 times

3E058FBC-0746-4391-AA3E-BC5007E99029.jpeg
3E058FBC-0746-4391-AA3E-BC5007E99029.jpeg (731.87 KiB) Viewed 2071 times

B90BEE05-FD98-4541-A362-59F2D88423DD.jpeg
B90BEE05-FD98-4541-A362-59F2D88423DD.jpeg (720.88 KiB) Viewed 2071 times

Then it was on to the striker plate reinforcements / stiffeners...
Last edited by andrewjsimpson1977 on Mon May 27, 2019 9:27 pm, edited 2 times in total.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon May 27, 2019 8:56 pm

...which were cleaned up and primered, and left to dry while I had my dinner. If Sara asks I had a healthy salad, and definitely not a frozen pizza from the petrol station.

Lined up with a bit of wood and some metal shims until the right height was achieved:

B4204B15-8D46-445F-819A-0AA02D709A94.jpeg
B4204B15-8D46-445F-819A-0AA02D709A94.jpeg (786.47 KiB) Viewed 2068 times

After the first couple of holes were drilled it became apparent that access for at least one of the others would be limited round the back :o so I grabbed the stiffener 8-) and bolted it through the first two holes to be used as a drilling template.

84C73BEB-0627-4BBD-8AEE-B13840266A76.jpeg
84C73BEB-0627-4BBD-8AEE-B13840266A76.jpeg (776.59 KiB) Viewed 2068 times

Next, a quick check using the base bracket for the door striker (Its actually driver’s side one but it was to hand and the hole pattern is identical)

F233C544-BF12-4EB8-8952-7D6BBDEF3C9F.jpeg
F233C544-BF12-4EB8-8952-7D6BBDEF3C9F.jpeg (845.97 KiB) Viewed 2068 times

..and finally happy that the bracket was positioned correctly, it was glued and bolted up for a few days to cure:

0B4990B1-E012-4C8E-970B-EE34F7FF4963.jpeg
0B4990B1-E012-4C8E-970B-EE34F7FF4963.jpeg (345.26 KiB) Viewed 2068 times

I also fitted some more rivets, fastening the tub floor front to the valance panel, and the underside of the seat back panel, also to the valance.

I nearly forgot - have also fitted the driver's side dog ear, but then you've seen one of those already. It's coming together nicely - really pleased to see something vaguely truck-shaped appearing from the murky depths of the garage.

That’s it for tonight - I dug out the seat box parts for cleaning up as that will be the next big piece of the jigsaw. It doesn’t look too bad, but I’ll save those photos for another day.

All the best,

Andy

Oneandtwo
Posts: 242
Joined: Sun Nov 09, 2014 7:53 am

Re: Monty the rather rusty 2A - 37FG31

Post by Oneandtwo » Tue May 28, 2019 5:55 am

Have you thought about using countersunk pop rivets for the wheelbox to side channel? Once paint is on tub they are far less noticeable than standard pop rivets.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Tue May 28, 2019 8:04 am

Oneandtwo wrote: ↑
Tue May 28, 2019 5:55 am
Have you thought about using countersunk pop rivets for the wheelbox to side channel? Once paint is on tub they are far less noticeable than standard pop rivets.
I did give it some thought, but as I didn’t have any in stock I went with what I had. The more I think about it the more you may be right - can always swap them out before paint.

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: Monty the rather rusty 2A - 37FG31

Post by Loulou » Tue May 28, 2019 8:08 am

Hello andrewjsimpson1977,

I am impressed by your work and the quality of it.
You are leaving very far, congratulations for your approach.
Receive all my congratulations and encouragement.

Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Tue May 28, 2019 8:53 am

Loulou wrote: ↑
Tue May 28, 2019 8:08 am
Hello andrewjsimpson1977,

I am impressed by your work and the quality of it.
You are leaving very far, congratulations for your approach.
Receive all my congratulations and encouragement.

Looloo
Merci pour vos compliments, qui sont très appréciés Looloo.

landylees
Pastry Chef
Posts: 639
Joined: Mon Jan 29, 2018 8:43 pm
Location: Bishops Stortford

Re: Monty the rather rusty 2A - 37FG31

Post by landylees » Tue May 28, 2019 10:38 pm

Andy,

Looking very good. If my seat back panel wasn't being remade we would be having a race to the finish of the tub.....and I know where my air riveter is :D
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Wed May 29, 2019 2:51 pm

landylees wrote: ↑
Tue May 28, 2019 10:38 pm
Andy,

Looking very good. If my seat back panel wasn't being remade we would be having a race to the finish of the tub.....and I know where my air riveter is :D
You might have some other competition soon - Mac is having his seat back panel remade too. Let battle commence! 8-)

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Wed May 29, 2019 10:26 pm

A few more pictures - first a spot of mock-uppery to see how things were aligning and what needs work to get straight:

8D57098D-7F8B-41B2-8375-B975686A9444.jpeg
8D57098D-7F8B-41B2-8375-B975686A9444.jpeg (903.33 KiB) Viewed 1947 times
166CF133-E01B-427C-BAEB-C246D14A4369.jpeg
166CF133-E01B-427C-BAEB-C246D14A4369.jpeg (760.14 KiB) Viewed 1947 times

...well ok yes and it made me feel like I had a truck shaped thing again. It does annoy me to see the land rover badge on the wrong side - that'll be getting fixed soon enough.

Next I finished straightening the centre upright support and got it in some etch primer:

0B0F403E-2D9B-4E16-AC0D-A3F1179B9619.jpeg
0B0F403E-2D9B-4E16-AC0D-A3F1179B9619.jpeg (737.34 KiB) Viewed 1947 times

..before fitting to the valance panel:

A10425ED-FA64-4D54-A9E8-02AD335B3214.jpeg
A10425ED-FA64-4D54-A9E8-02AD335B3214.jpeg (406.55 KiB) Viewed 1947 times
I just wish I could remember what I did with the square tube section which receives the uber-rare long pole for the tub passengers to cling onto when in airportable mode. I feel another garage tidy coming on.

I really am out of rivets now, so until some more turn up (hopefully Friday) I’ll have to find something else to do. I did find the timing indicator for the front engine panel, so that will get un-bent and fitted tomorrow time permitting. I should then be able to work out how to get a basic static timing job done on the engine.

Evening all,

Andy

Post Reply