44AJ20 & 93KA28 Rebuild Barbados

Tell us about any of your Land Rover related projects here.
Post Reply
User avatar
weetchus
Pastry Chef
Posts: 676
Joined: Wed Aug 15, 2018 3:15 pm

Gearbox ready for extraction

Post by weetchus » Tue Oct 30, 2018 4:25 pm

Screen Shot 2018-10-30 at 12.25.00 pm.png
Screen Shot 2018-10-30 at 12.25.00 pm.png (3.58 MiB) Viewed 2302 times

User avatar
weetchus
Pastry Chef
Posts: 676
Joined: Wed Aug 15, 2018 3:15 pm

Earth red colour

Post by weetchus » Tue Oct 30, 2018 4:27 pm

Anyone know anything about this colour engine in 93KA28?
The engine in 44AJ20 was the lovely 'Preserved' turquoise colour.
Screen Shot 2018-10-30 at 12.25.48 pm.png
Screen Shot 2018-10-30 at 12.25.48 pm.png (2.61 MiB) Viewed 2302 times

User avatar
stanfonj
Posts: 245
Joined: Thu Apr 19, 2012 11:47 am
Location: Cheshire

Re: 44AJ20 & 93KA28 Rebuild Barbados

Post by stanfonj » Tue Oct 30, 2018 4:30 pm

It's the same colour as mine in 93KA08.

User avatar
weetchus
Pastry Chef
Posts: 676
Joined: Wed Aug 15, 2018 3:15 pm

Seat back template

Post by weetchus » Tue Oct 30, 2018 4:37 pm

Getting ahead of myself here but planning the upholstery so I can get someone to make up some seats. I don't want vinyl as it is generally 30 degrees centigrade here in Barbados, 365 days a year. So I am thinking about dark, dark grey canvas or sunbrella. Sunbrella is used for patio and marine upholstery so I am leaning towards that. I'll try to keep the look but make my seats a bit cooler.

This is the seat back template. Thanks to the owner of 23 KB 26 for creating your website page http://www.land-rover-lightweight.co.uk/Seats.html.
The measurements are perfect but I made the template to make sure I get the eyelets in the right position.
Screen Shot 2018-10-30 at 12.28.50 pm.png
Screen Shot 2018-10-30 at 12.28.50 pm.png (1.77 MiB) Viewed 2301 times
Here are the seat bases I made with marine plywood. I have sprayed them now with Rustoleum Professional Grade Truck Bed liner... which is a non-slip, rubberised paint that should create a good noise and water barrier.
Happy with the results.
Screen Shot 2018-10-30 at 12.36.07 pm.png
Screen Shot 2018-10-30 at 12.36.07 pm.png (3.3 MiB) Viewed 2301 times

Landie68
Master Baker
Posts: 1564
Joined: Sat Dec 03, 2016 6:31 pm
Location: Herefordshire

Re: Cleaned engine... looking very promising

Post by Landie68 » Tue Oct 30, 2018 8:21 pm

weetchus wrote: ↑
Tue Oct 30, 2018 4:23 pm
I know the engine turns over... but it is great to give it a power wash and remove all the horrible grease and inch layer of soil (was a farm vehicle) to reveal this.
Screen Shot 2018-10-30 at 12.21.38 pm.png
I've sprayed copious amounts of WD-40 to keep any surface rust at bay.
An interesting routing for the heater pipe. However I doubt you will want a heater where you live but would be nice to see one in place just for originality.
Regards
Richard

Discovery Sport
15FM83 ex 15 Para and 7 PO's

User avatar
weetchus
Pastry Chef
Posts: 676
Joined: Wed Aug 15, 2018 3:15 pm

Re: Cleaned engine... looking very promising

Post by weetchus » Wed Oct 31, 2018 2:55 pm

Landie68 wrote: ↑
Tue Oct 30, 2018 8:21 pm
weetchus wrote: ↑
Tue Oct 30, 2018 4:23 pm
I know the engine turns over... but it is great to give it a power wash and remove all the horrible grease and inch layer of soil (was a farm vehicle) to reveal this.
Screen Shot 2018-10-30 at 12.21.38 pm.png
I've sprayed copious amounts of WD-40 to keep any surface rust at bay.
An interesting routing for the heater pipe. However I doubt you will want a heater where you live but would be nice to see one in place just for originality.
I don't even know which one it is yet! ha. I will do in due course.

User avatar
weetchus
Pastry Chef
Posts: 676
Joined: Wed Aug 15, 2018 3:15 pm

Instrument Panel Refurb

Post by weetchus » Wed Nov 07, 2018 6:04 pm

Okay. So the 93KA28 panel was way better than the horribly rusted 44AJ20 one. So I took some time off the hard labour and did some more intricate and instantly rewarding work on refurbishing it.

Here is what it looked like before:
Screen Shot 2018-11-07 at 1.56.29 pm.png
Screen Shot 2018-11-07 at 1.56.29 pm.png (2.49 MiB) Viewed 2225 times
Screen Shot 2018-11-07 at 2.00.31 pm.png
Screen Shot 2018-11-07 at 2.00.31 pm.png (1.97 MiB) Viewed 2225 times
Screen Shot 2018-11-07 at 2.01.19 pm.png
Screen Shot 2018-11-07 at 2.01.19 pm.png (2.37 MiB) Viewed 2225 times
Screen Shot 2018-11-07 at 2.01.58 pm.png
Screen Shot 2018-11-07 at 2.01.58 pm.png (895.24 KiB) Viewed 2225 times

User avatar
weetchus
Pastry Chef
Posts: 676
Joined: Wed Aug 15, 2018 3:15 pm

Instrument Panel Rebuild

Post by weetchus » Wed Nov 07, 2018 6:06 pm

And here is what it looks like after:
Screen Shot 2018-11-07 at 2.02.41 pm.png
Screen Shot 2018-11-07 at 2.02.41 pm.png (2.37 MiB) Viewed 2225 times
Screen Shot 2018-11-07 at 2.03.40 pm.png
Screen Shot 2018-11-07 at 2.03.40 pm.png (2.13 MiB) Viewed 2225 times
Very Darth Vader chest-plate -esque.
Happy with the results.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: 44AJ20 & 93KA28 Rebuild Barbados

Post by AR4412 » Wed Nov 07, 2018 6:13 pm

That looks a lot smarter for your efforts. 8-)

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
landymad
Admin
Posts: 3979
Joined: Wed Jan 13, 2010 8:42 am
Location: Doncaster

Re: 44AJ20 & 93KA28 Rebuild Barbados

Post by landymad » Wed Nov 07, 2018 6:41 pm

that looks much better, nice to so something with instant results now and then.
Rob.
Chairman and Webmaster.

1972 Series III Lightweight GS 200Tdi
----------------------------------------------------------

Post Reply