Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Thu Jun 15, 2017 7:31 pm

You are a mind reader Jon. Front axle is WIP, as the swivel balls are in caustic having the chrome stripped off them. I have a cunning plan for a new coating which is less labour intensive (and expensive) than re-chroming.. I'm going to try coating them in Dry Moly.

Yes - the stuff I baulked at as too costly to coat the springs in, is back in the game. I got the idea from a guy who plastic coated his balls (matron). I don't have access to the same equipment (he worked at a powder coating business), but after some research it turns out that dry Moly is more durable, a better lubricant, oil and water resistant, and designed to operate under pressure as its original purpose is for use in heavy machinery (where wet lubricants would be broken down by heat or extreme pressure).

That coupled with the fact I intend to use one-shot in the swivels instead of oil - I don't think that much can go wrong (famous last words, I know).

I know it's not one for the purists, but hell - if it doesn't work, I'll just buy some more balls, or get mine stripped and re-chromed.

Should be able to get the balls coated and back on the axle tube this weekend.

I'm starting to get slightly feverish at the thought of a complete rolling chassis. I have a good gearbox ready to drop into it (apart from replaced a snapped lever and a general clean), so it's going to be half a truck soon :D

Cheers,

Andy

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Thu Jun 15, 2017 7:35 pm

Hi Fred,

In my Autosparks loom, there is a correctly colour coded pair of wires (for the fuel cabling) inside the chassis rail, which lines up with the big hole on the underside of the chassis. I mean, it seems a bit daft to have a vulnerable wire poke out underneath the chassis. Can anyone confirm where the fuel talk wires are supposed to go on a 2a? It's worth bearing in mind that on the series 3 the fuel changeover switch is mounted on the seat box. In the 2a it's in the bulkhead next to the footwell, so it makes more sense for the wires to follow the rest of the loom around the front of the bulkhead.

Fred- Do you have such a large hole in the underside of the chassis rail on your series 3? If not for wires what is it for? Drainage?

Maybe it's yet another one of those 2a idiosyncrasies. I mean either that, or the autosparks colour coding is complete cobblers and I have just threaded the utterly wrong bit of loom through the chassis.

Let's face it, either eventuality is possible :lol:

88lr
Posts: 285
Joined: Sat Jun 27, 2015 3:59 pm

Re: Monty the rather rusty 2A - 37FG31

Post by 88lr » Thu Jun 15, 2017 7:57 pm

Andy nice to see your getting on well.
I see I bought two prop shaft gaiters, I didn't realise I only needed one, 'cos the rear prop shaft doesn't have one.
That is incorrect, the Lightweight rear prop is the same as fitted to the earlier Rover 10. It certainly has one fitted. Indeed the LR Supp parts lists, under miscellaneous chassis items states "Rear prop shaft with gaiter on sliding joint...etc"

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Thu Jun 15, 2017 10:53 pm

88lr wrote: ↑
Thu Jun 15, 2017 7:57 pm
I see I bought two prop shaft gaiters, I didn't realise I only needed one, 'cos the rear prop shaft doesn't have one.
That is incorrect, the Lightweight rear prop is the same as fitted to the earlier Rover 10. It certainly has one fitted. Indeed the LR Supp parts lists, under miscellaneous chassis items states "Rear prop shaft with gaiter on sliding joint...etc"
That's interesting. I haven't looked in the supplementary parts list - but mine doesn't have one on the rear and, of course, nor do they in the main IPC. I wonder whether there was a change during production? Of course, just because mine doesn't have one now is no proof that it didn't originally - with over 20 years in private hands anything can have happened. Interestingly, I think the seatbox was changed at some point - now why would anyone need to do that?

Do you know of any other anomalies from the Supplementary arts List which might affect a 1979 GS Series 3?

Fred

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Thu Jun 15, 2017 10:59 pm

andrewjsimpson1977 wrote: ↑
Thu Jun 15, 2017 7:35 pm
Hi Fred,

In my Autosparks loom, there is a correctly colour coded pair of wires (for the fuel cabling) inside the chassis rail, which lines up with the big hole on the underside of the chassis. I mean, it seems a bit daft to have a vulnerable wire poke out underneath the chassis. Can anyone confirm where the fuel talk wires are supposed to go on a 2a? It's worth bearing in mind that on the series 3 the fuel changeover switch is mounted on the seat box. In the 2a it's in the bulkhead next to the footwell, so it makes more sense for the wires to follow the rest of the loom around the front of the bulkhead.

Fred- Do you have such a large hole in the underside of the chassis rail on your series 3? If not for wires what is it for? Drainage?

Maybe it's yet another one of those 2a idiosyncrasies. I mean either that, or the autosparks colour coding is complete cobblers and I have just threaded the utterly wrong bit of loom through the chassis.

Let's face it, either eventuality is possible :lol:
That's interesting - you're right, of course, the fuel tap is in a different place on the 2A. But, as your wires have to go from the top of the tank to the rear of the inner OS footwell, I would have thought that the easiest route would have been along the gearbox tunnel. But, I am right out of my comfort zone here - as I said the other day, I know nothing about Series 2As and, of course, it is perfectly possible that my wiring was fiddled with. I don't know about the hole underneath - I'll have a look tomorrow. I do have holes underneath on the old chassis, but I think they aren't supposed to be there!
Fred

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Fri Jun 16, 2017 9:03 am

Fred wrote: ↑
Thu Jun 15, 2017 10:53 pm
88lr wrote: ↑
Thu Jun 15, 2017 7:57 pm
I see I bought two prop shaft gaiters, I didn't realise I only needed one, 'cos the rear prop shaft doesn't have one.
That is incorrect, the Lightweight rear prop is the same as fitted to the earlier Rover 10. It certainly has one fitted. Indeed the LR Supp parts lists, under miscellaneous chassis items states "Rear prop shaft with gaiter on sliding joint...etc"
That's interesting. I haven't looked in the supplementary parts list - but mine doesn't have one on the rear and, of course, nor do they in the main IPC. I wonder whether there was a change during production? Of course, just because mine doesn't have one now is no proof that it didn't originally - with over 20 years in private hands anything can have happened. Interestingly, I think the seatbox was changed at some point - now why would anyone need to do that?

Do you know of any other anomalies from the Supplementary arts List which might affect a 1979 GS Series 3?

Fred
Ignore this! I can't think what my mind is up to these days. I bought two because I saw, in the Lightweight IPC, I needed two. But, lately, I have been using the civvy IPC pages for final drive reference and the drawing there shows no gaiter. So, somehow, I have got it into my mind that you only need one. But, as my IPCs are combined in the same folder, on the very next page is the illustration with the gaiter! Many apologies for confusing - i shall be a bit more careful in future (I hope).

Fred

Landie68
Master Baker
Posts: 1564
Joined: Sat Dec 03, 2016 6:31 pm
Location: Herefordshire

Re: Monty the rather rusty 2A - 37FG31

Post by Landie68 » Fri Jun 16, 2017 7:06 pm

All looking good Andy. Have to say, I didn't notice any wires coming out of the chassis on my series 3 FFR for the fuel tanks, mine definitely ran on the underside of the seat box, but again after 20 years in civilian hands anything is possible, but the way it's fixed under the seat box it looks original. Maybe the knowledgeable on hear can enlighten us all.
Regards
Richard

Discovery Sport
15FM83 ex 15 Para and 7 PO's

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 17, 2017 7:20 pm

Evening all.

Today I finally got round to stripping the tub, of paint, door slam plate, the two remaining tub floor runners, the floor itself... and a whole load of horrible bitumastic.

I hate the stuff. I want to make it my life's mission to eradicate it from the planet. So long as someone invents a nice easy way for me to do it.

As well as the floor coming out, it was time for the rotten valance panel / crossmembery thing to come out.

The steel brackets for the seat belts were rusted in so badly, it was easier for me to grind off the captive nuts. I'll weld in new ones upon reassembly, but I have to say that in today's 32 degrees of heat, I'm much preferring the impatient approach in terms of getting things done.
IMG_4374.JPG
IMG_4374.JPG (119.17 KiB) Viewed 1611 times
Next, rivets were drilled out..
IMG_4375.JPG
IMG_4375.JPG (96.72 KiB) Viewed 1611 times
Also, Idon't know who was on shift at Land Rover the day my tub was built but they seem to have got a bit zap happy with the spot welder. I counted over thirty spots across the front of the panel... talk about overkill!
IMG_4376.JPG
IMG_4376.JPG (101.5 KiB) Viewed 1611 times
Anyway - now it's off it looks the poor relation compared to the shiny new replacement..
IMG_4381.JPG
IMG_4381.JPG (159.63 KiB) Viewed 1611 times
More photos to follow..

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 17, 2017 7:24 pm

Tub:
IMG_4377.JPG
IMG_4377.JPG (148.46 KiB) Viewed 1611 times
Floor removed - still covered in bitumastic:
IMG_4378.JPG
IMG_4378.JPG (152.48 KiB) Viewed 1611 times
Damage to edge - not too bad actually. Definitely repairable:
IMG_4379.JPG
IMG_4379.JPG (158.09 KiB) Viewed 1611 times
Damage to floor strengthener - also doable:
IMG_4380.JPG
IMG_4380.JPG (177.96 KiB) Viewed 1611 times

Gordon Bennett
Maître Pâtissier
Posts: 7422
Joined: Sun Jan 10, 2010 12:21 pm

Re: Monty the rather rusty 2A - 37FG31

Post by Gordon Bennett » Sat Jun 17, 2017 7:29 pm

Hi Andy,

Wow, you've cracked on there mate :P

I could say weld done, but it's more a case of weld undone! That does seem like overkill.

Not been quite as hot up here, but I've been stuck indoors all day :cry:

Father's Day tomoz, so hopefully you will get lots of LWT style Prezzies :!

Rgds,
Gordon

Post Reply