Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Thu Feb 23, 2017 12:41 pm

Well after three and a half hours failing to get into London today, I am now WFH until the train service resumes.

I got home at lunch, which meant ramming down some food in record time so I could justify jetwashing the rear diff. It's. It's been in mild acid overnight, then a few days degreasing before a check over.
IMG_1195.JPG
IMG_1195.JPG (154.17 KiB) Viewed 1337 times
All seems fine, so next step is to prevent rust returning.
IMG_1197.JPG
IMG_1197.JPG (125.24 KiB) Viewed 1337 times
I'll get some grey primer over the top later on, as for once the anti rust primer is drying quickly due to all this wind.

Also the new diff gaskets I ordered have arrived, and I found (and dipped) all the diff nuts - so assuming this awful weather calms down a bit at the weekend, we should be all good to go for the rebuil... actually I'm not going to say it. Let's just see what happens.

Andy

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Thu Feb 23, 2017 5:14 pm

Grey primer on. Hope to get some chassis black on it tomorrow if the paint gun frees up. Some daft so and so forgot to flush it through. :roll:
IMG_1199.JPG
IMG_1199.JPG (111.83 KiB) Viewed 1319 times

User avatar
Bob Fell
Cake Guru
Posts: 3044
Joined: Wed Sep 18, 2013 7:17 am
Location: Melton Mowbray

Re: Monty the rather rusty 2A - 37FG31

Post by Bob Fell » Thu Feb 23, 2017 6:38 pm

Rule 1

Always clean your tool.

Bob
042Bobf


19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Thu Feb 23, 2017 7:55 pm

Agreed Bob - schoolboy error on my part. The gun is in acid tonight as white spirit failed to clear the nozzle.

I have had a strong word or two with myself don't worry.

Andy

Gordon Bennett
Maître Pâtissier
Posts: 7422
Joined: Sun Jan 10, 2010 12:21 pm

Re: Monty the rather rusty 2A - 37FG31

Post by Gordon Bennett » Sat Feb 25, 2017 11:25 am

Hi Gndy,

Great to see that you have been making good progress over the last couple of weeks.

Hope the gun cleans out ok.

Rgds,
Gordon

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Feb 25, 2017 3:00 pm

Thanks Gordon,

Gun is still being stubborn, so it's over to the rattle cans for today's update.

Today I have cleaned the paint off the mating rim of the diff part of the axle casing, washed the whole casing thoroughly in every type of cleaner I could lay my hands on, rinsed thoroughly with the garden hose, and dried it inside and out with some old rags.

Stage two was getting the diff bolted up - which was done with the aid of some gasket sealant and a new gasket. The diff has received its first coat of black, before the horizontal rains came down again, and it was time to pack up.
IMG_1208.JPG
IMG_1208.JPG (110.45 KiB) Viewed 1340 times
IMG_1209.JPG
IMG_1209.JPG (106.89 KiB) Viewed 1340 times
An old friend is coming over this afternoon with his son, so we are on parental / kicking back with beer duties.

I did manage to rub down the hub, stub and brake parts I painted by hand previously, and gave them a blow over with rattle can black.

Hopefully tomorrow there will be enough time to bolt the stub axles and brake plates on, and finish the hubs with new bearings / seals etc.

I know progress is slow, but in my defence it is winter, and I am feeling old.

All the best,

Andy

Macvfork
Pastry Chef
Posts: 717
Joined: Sun Aug 17, 2014 3:31 pm
Location: Heathfield, sussex

Re: Monty the rather rusty 2A - 37FG31

Post by Macvfork » Sun Feb 26, 2017 7:30 am

Lovely job Andy. Feeling envious. Have fun today!
Just been told to take my diff off by a guru.
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.

User avatar
StuWright
Master Baker
Posts: 1740
Joined: Wed Feb 24, 2016 11:10 pm
Location: Southampton

Re: Monty the rather rusty 2A - 37FG31

Post by StuWright » Sun Feb 26, 2017 8:30 am

Nice work Andy. Good to hear you took your time with the prep work, which makes all the difference. If you own a Lwt you will never be old inside mate. 8-)
Thanks

Stu

55AM52 Ex RAF Land Rover Lightweight GS

Macvfork
Pastry Chef
Posts: 717
Joined: Sun Aug 17, 2014 3:31 pm
Location: Heathfield, sussex

Re: Monty the rather rusty 2A - 37FG31

Post by Macvfork » Sun Feb 26, 2017 8:41 am

StuWright wrote: ↑
Sun Feb 26, 2017 8:30 am
Nice work Andy. Good to hear you took your time with the prep work, which makes all the difference. If you own a Lwt you will never be old inside mate. 8-)
Closer one gets to finishing, the younger one gets I guess Stu. Excitement factor. Must be close to nappy purchase time for you. Lovely job.
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.

User avatar
StuWright
Master Baker
Posts: 1740
Joined: Wed Feb 24, 2016 11:10 pm
Location: Southampton

Re: Monty the rather rusty 2A - 37FG31

Post by StuWright » Sun Feb 26, 2017 11:24 am

Macvfork wrote: ↑
Sun Feb 26, 2017 8:41 am
StuWright wrote: ↑
Sun Feb 26, 2017 8:30 am
Nice work Andy. Good to hear you took your time with the prep work, which makes all the difference. If you own a Lwt you will never be old inside mate. 8-)
Closer one gets to finishing, the younger one gets I guess Stu. Excitement factor. Must be close to nappy purchase time for you. Lovely job.
I agree and I am excited to get back on the road. The good thing about Lwts is they are not ten a penny like Defenders and you still meet people that have not seen one before. The bad thing is they are not as main stream as Defenders so some of the parts take ages to find or have to be restored. Yes owning a Lwt gives you Peter Pan status. :D
Thanks

Stu

55AM52 Ex RAF Land Rover Lightweight GS

Post Reply