That makes sense it's the year stamp. There is a guy called Ffogpart on the Lightweight owners club who has tons of info on diff codes and can tell you all sorts of info about the batches etc.88lr wrote:Diffs often have stamps the 74 is almost certainly for made in 1974.The 4T maybe a quality control marking?
FM, What have I done project
Re: FM, What have I done project
Thanks
Stu
55AM52 Ex RAF Land Rover Lightweight GS
Stu
55AM52 Ex RAF Land Rover Lightweight GS
Re: FM, What have I done project
Thanks Chaps. Apologies I should have looked at her ERM before posting.
From that her recorded DIS was 1/1974 and from what I gather on here, the date of manufacture could be some two years before. I guess a Heritage cert will be useful for getting an age related number plate as currently on a Q plate and no log book.Amongst many other things I don't know anything about Heritage carts.
Mac
Ps. Found this in the General debris surrounding the take apart area. As far as aware have not taken apart anything likely to go ping. Baler twine is so I can see it with or without my glasses!
From that her recorded DIS was 1/1974 and from what I gather on here, the date of manufacture could be some two years before. I guess a Heritage cert will be useful for getting an age related number plate as currently on a Q plate and no log book.Amongst many other things I don't know anything about Heritage carts.
Mac
Ps. Found this in the General debris surrounding the take apart area. As far as aware have not taken apart anything likely to go ping. Baler twine is so I can see it with or without my glasses!
- Attachments
-
- IMG_3616.JPG (722.28 KiB) Viewed 1402 times
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
Re: FM, What have I done project
My axle has a "hammered" finish thanks to corrosion and some non original holes in the reinforcing sections which will be cut out and replaced. Other than that externally I am thinking all it needs is rust converter and painting black. What would be a propa job in your view?
I have the bits for the internals.
I have the bits for the internals.
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
Re: FM, What have I done project
Need my glasses obviously or too much Badgers more likely.
Pics of said axle below.
A welding hammer in one reinforcing section.
Breather banjo removed.
Pics of said axle below.
A welding hammer in one reinforcing section.
Breather banjo removed.
- Attachments
-
- IMG_3617.JPG (790.25 KiB) Viewed 1387 times
-
- IMG_3622.JPG (583.39 KiB) Viewed 1387 times
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
Re: FM, What have I done project
Well a busy day or so my back tells me.
Four shackle bushes in
Springs reassembled but wrong shackle bolts. Grrr
Tried to remove diff housing.
Sold set of tyres
Removed half shafts and drums.
Succeeded in removing diff housing AND all the guts. Never seen one before so sat back rather like a teenager and admired the workmanship/view wondering what the hell do I do with that.
Went back to steering relay and cleaned that up.
Four shackle bushes in
Springs reassembled but wrong shackle bolts. Grrr
Tried to remove diff housing.
Sold set of tyres
Removed half shafts and drums.
Succeeded in removing diff housing AND all the guts. Never seen one before so sat back rather like a teenager and admired the workmanship/view wondering what the hell do I do with that.
Went back to steering relay and cleaned that up.
- Attachments
-
- IMG_3645.JPG (625.63 KiB) Viewed 1377 times
-
- IMG_3641.JPG (594.96 KiB) Viewed 1377 times
-
- IMG_3624.JPG (802.62 KiB) Viewed 1377 times
-
- IMG_3623.JPG (642.59 KiB) Viewed 1377 times
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
-
Gordon Bennett
- Maître Pâtissier
- Posts: 7422
- Joined: Sun Jan 10, 2010 12:21 pm
Re: FM, What have I done project
Hi Mac,
Sounds and looks like you've had a great day!
Great method for getting the new bushes into the springs without a press
Take it easy with your back.
Rgds,
Gordon
Sounds and looks like you've had a great day!
Great method for getting the new bushes into the springs without a press
Take it easy with your back.
Rgds,
Gordon
Re: FM, What have I done project
Hi Mac,Gordon Bennett wrote:Hi Mac,
Sounds and looks like you've had a great day!
Great method for getting the new bushes into the springs without a press![]()
Take it easy with your back.
Rgds,
Gordon
I'll second all of the above.
Good to know the internals of the diff seem to be okay.
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
Re: FM, What have I done project
[quote="Gordon Bennett"]Hi Mac,
Sounds and looks like you've had a great day!
Great method for getting the new bushes into the springs without a press
Take it easy with your back.
Rgds,
Gordon
Aye Gordon, a good day as you say.
Could have used the log splitter as a press but needed to spin it out to avoid going shopping!
Mac
Sounds and looks like you've had a great day!
Great method for getting the new bushes into the springs without a press
Take it easy with your back.
Rgds,
Gordon
Aye Gordon, a good day as you say.
Could have used the log splitter as a press but needed to spin it out to avoid going shopping!
Mac
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
Re: FM, What have I done project
Cheers Neil,AR4412 wrote:Hi Mac,Gordon Bennett wrote:Hi Mac,
Sounds and looks like you've had a great day!
Great method for getting the new bushes into the springs without a press![]()
Take it easy with your back.
Rgds,
Gordon
I'll second all of the above.
Good to know the internals of the diff seem to be okay.
Regards,
Anything else to look for now that I am in there?
Couple of badgers cured the backache which by comparison to others makes it trivial. Hope the pain is easing or gone.
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.