I will post the pictures hopefully when I get back, maybe Thursday if I am too late.
Winterised Equipment
Winterised Equipment
I am very pleased I didn't end up bidding on the ebay Winterised kit because tomorrow I am picking up a complete kit for £100.
I will post the pictures hopefully when I get back, maybe Thursday if I am too late.
I will post the pictures hopefully when I get back, maybe Thursday if I am too late.
Thanks
Stu
55AM52 Ex RAF Land Rover Lightweight GS
Stu
55AM52 Ex RAF Land Rover Lightweight GS
Re: Winterised Equipment
Hi Stu,
Good price mate. Is that the kit we were discussing a little while ago?
Regards,
Good price mate. Is that the kit we were discussing a little while ago?
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
-
Gordon Bennett
- Maître Pâtissier
- Posts: 7422
- Joined: Sun Jan 10, 2010 12:21 pm
Re: Winterised Equipment
Hi Stu,StuWright wrote:I am very pleased I didn't end up bidding on the ebay Winterised kit because tomorrow I am picking up a complete kit for £100.![]()
I will post the pictures hopefully when I get back, maybe Thursday if I am too late.
Great price and looking forward to the pics so i can see what is in the kit.
Rgds,
Gordon
Re: Winterised Equipment
Yes it is Neil.AR4412 wrote:Hi Stu,
Good price mate. Is that the kit we were discussing a little while ago?
Regards,
I have only just got home so no chance to photo tonight.Gordon Bennett wrote:Hi Stu,StuWright wrote:I am very pleased I didn't end up bidding on the ebay Winterised kit because tomorrow I am picking up a complete kit for £100.![]()
I will post the pictures hopefully when I get back, maybe Thursday if I am too late.
Great price and looking forward to the pics so i can see what is in the kit.
Rgds,
Gordon
It looks like there are the door vents, screen vents, heater, all heater pipework, the roof pipe holder and mounting strips, large bore pipework from the engine and the valve with threaded outlet metal pipework. The adaptor from under the thermostat housing is missing because the owner didn't know it could be removed, so looped the pipework. Also the valve is missing the red round handle off the top. I can't complain though for the price and it was working perfectly before being stripped out.
The funny thing is the roof pipe holder is fitted using the same type of strips as found on the tub floor. Also the owner said before he stripped out the kit the over door vents were fitted in the rear. When I remembered a 6 outlet heater previously, it actually made sense to have rear outlet when soldiers were in the rear. I can just imagine in canvas Lwts having freezing soldiers in the rear and toasty ones I the front. With the rad muff on and the wind chill factor being low I can remember the centre box used to get red hot even in Norway. I have seen the 6 outlet box plates on ebay and pretty sure the Defender ones had this set up. I will do a bit of digging as it is highly possible it was later fix that found it's way onto some Lwt kits. I am interested to see if Defenders had outlets in the rear and what vents they used.
On a plus note I have managed to do another little deal on a partial kit currently fitted to someone elses vehicle. This consists of all the engine side parts and another heater in 12v. That way whichever Lwt I end up picking up for the project, it won't matter if it is 12v or 24v.
Thanks
Stu
55AM52 Ex RAF Land Rover Lightweight GS
Stu
55AM52 Ex RAF Land Rover Lightweight GS
Re: Winterised Equipment
Hi Stu,
Sounds like you picked up an absolute bargain there! On all the photos of winterised LWTs I have seen, it appears common to use a couple of tub strips to mount the ducting holder, which supports the windscreen blower heads ducting. This maybe because many had the strips removed so that the thick rubber matting would sit flat on the floor. Also as in my case, the strips would have interfered with the additional slave battery mounting.
Did you get a core plug adaptor as well?
Regards Jon
Sounds like you picked up an absolute bargain there! On all the photos of winterised LWTs I have seen, it appears common to use a couple of tub strips to mount the ducting holder, which supports the windscreen blower heads ducting. This maybe because many had the strips removed so that the thick rubber matting would sit flat on the floor. Also as in my case, the strips would have interfered with the additional slave battery mounting.
Did you get a core plug adaptor as well?
Regards Jon
Re: Winterised Equipment
No core plug adaptor. I probably need some advice on how that can be replaced with a core plug so I can persuade the person I am talking with to remove it.Jon S wrote:Hi Stu,
Sounds like you picked up an absolute bargain there! On all the photos of winterised LWTs I have seen, it appears common to use a couple of tub strips to mount the ducting holder, which supports the windscreen blower heads ducting. This maybe because many had the strips removed so that the thick rubber matting would sit flat on the floor. Also as in my case, the strips would have interfered with the additional slave battery mounting.
Did you get a core plug adaptor as well?
Regards Jon
Thanks
Stu
55AM52 Ex RAF Land Rover Lightweight GS
Stu
55AM52 Ex RAF Land Rover Lightweight GS
Re: Winterised Equipment
I cannot easily see how the adaptor fits into the block. I attach a fairly rubbish photo which shows that it is positioned quite far back on the L/H side of the block. I cannot see if it is using a core plug hole but assume it would be. Might be an idea to see if the 200TDi core plug is the same as those used on the original 2.25 petrol. If not, no point in asking the seller to try to remove his one.
I also cannot tell if the adaptor is a push fit like a core plug, or whether the hole has been tapped BSP or similar to accept it.
I might be able to get a better shot at the W/E by crawling underneath the vehicle. But not today it's dark, too cold and I haven't done my Arctic survival course!
Regards Jon
I also cannot tell if the adaptor is a push fit like a core plug, or whether the hole has been tapped BSP or similar to accept it.
I might be able to get a better shot at the W/E by crawling underneath the vehicle. But not today it's dark, too cold and I haven't done my Arctic survival course!
Regards Jon
- Attachments
-
- P1080826c.JPG (331.5 KiB) Viewed 10454 times
-
Gordon Bennett
- Maître Pâtissier
- Posts: 7422
- Joined: Sun Jan 10, 2010 12:21 pm
Re: Winterised Equipment
Stu/Jon,
I'd like to see pics please of all the Winterised bits, in the full kit, when/if you get chance.
Would make a great thread in the reference section.
Rgds,
Gordon
I'd like to see pics please of all the Winterised bits, in the full kit, when/if you get chance.
Would make a great thread in the reference section.
Rgds,
Gordon
Re: Winterised Equipment
Hi Gordon,
My plan is to include details of the winterised parts in my forthcoming restoration thread, as I go through them and install them. I agree, it would be great to have a single thread showing at least the basic components and their installation. Some of my winter components are loose in boxes just now, as no point in installing all of them until the restoration gets under way. The heater will have to come out as will be stripping back to bare chassis.
In addition to my restoration thread, I can also put photos of the parts into a separate reference thread as well. It's a great idea as something like that would have saved me hours on the internet. Happy to do both. Mind you, target date for Frosty to be complete is for the 50th. Restoration scheduled to start upon completion of new garage in Spring 2017.
Regards Jon
My plan is to include details of the winterised parts in my forthcoming restoration thread, as I go through them and install them. I agree, it would be great to have a single thread showing at least the basic components and their installation. Some of my winter components are loose in boxes just now, as no point in installing all of them until the restoration gets under way. The heater will have to come out as will be stripping back to bare chassis.
In addition to my restoration thread, I can also put photos of the parts into a separate reference thread as well. It's a great idea as something like that would have saved me hours on the internet. Happy to do both. Mind you, target date for Frosty to be complete is for the 50th. Restoration scheduled to start upon completion of new garage in Spring 2017.
Regards Jon
Re: Winterised Equipment
I definitely won't be fitting it to my Tdi Lwt and will be looking for an ex SAS or RMC Lwt that has some history with Norway. Firstly I'm trying to get pictures and will try my hardest to get hold of one from a military plate if possible.
The core plug fitting is something I have considered and can remember one failing from a leak in that area. I don't know if it was the core fitting itself or the hose fitting. Another area of failure was either the rad or the pipework joining the rad. My intention would be to have a threaded fitting in a core plug regardless of whether the original was push fit or not. Even if I wanted the kit in my current Lwt it's a job I would sooner do on a stripped engine and not happens I guess to my fully rebuilt one. I will also look at getting complete silicon hoses in replace the of the rubber, in the classic Matt black colour.
I have spoken to a Defender owner who had a Winterised Lwt 15 years ago and he removed all the kit and scrapped it due to a rad failure.
it's amazing how many of these kits were just thrown away when they first came out of service.
He did find a company that could supply a new rad for it and will try and find out the details. The other sad thing is he has a ton of photos but none of the kit.
The core plug fitting is something I have considered and can remember one failing from a leak in that area. I don't know if it was the core fitting itself or the hose fitting. Another area of failure was either the rad or the pipework joining the rad. My intention would be to have a threaded fitting in a core plug regardless of whether the original was push fit or not. Even if I wanted the kit in my current Lwt it's a job I would sooner do on a stripped engine and not happens I guess to my fully rebuilt one. I will also look at getting complete silicon hoses in replace the of the rubber, in the classic Matt black colour.
I have spoken to a Defender owner who had a Winterised Lwt 15 years ago and he removed all the kit and scrapped it due to a rad failure.
He did find a company that could supply a new rad for it and will try and find out the details. The other sad thing is he has a ton of photos but none of the kit.
Thanks
Stu
55AM52 Ex RAF Land Rover Lightweight GS
Stu
55AM52 Ex RAF Land Rover Lightweight GS