Mistery piston

If you have encountered or solved a problem post here
Post Reply
User avatar
andracav
Posts: 44
Joined: Tue Sep 18, 2012 4:41 pm
Location: Bergamo-Italy

Mistery piston

Post by andracav » Tue Nov 22, 2016 3:15 pm

Hello,
I took out the head from my lightweight, engine n° 90216437C
One piston was seized, due to water in, the engine remained 8 years outside... :(

I take out the piston, it's not so bad but I need new piston rings. The piston is marked 275820 with number/letters on head.

Any help?
Attached photos of all pistons
Attachments
Piston4_a.JPG
Piston4_a.JPG (560 KiB) Viewed 1105 times
Piston3.JPG
Piston3.JPG (591.78 KiB) Viewed 1105 times
Piston2.JPG
Piston2.JPG (576.44 KiB) Viewed 1105 times
Piston1.JPG
Piston1.JPG (691.26 KiB) Viewed 1105 times
@ndracav

30FK91

User avatar
andracav
Posts: 44
Joined: Tue Sep 18, 2012 4:41 pm
Location: Bergamo-Italy

Re: Mistery piston

Post by andracav » Tue Nov 22, 2016 3:19 pm

other photos

Thanks in advance,
best regards
Andrea
Attachments
Piston4_c.JPG
Piston4_c.JPG (511.37 KiB) Viewed 1104 times
Piston4_b.JPG
Piston4_b.JPG (558.84 KiB) Viewed 1104 times
Piston4_a.JPG
Piston4_a.JPG (560 KiB) Viewed 1104 times
@ndracav

30FK91

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Mistery piston

Post by andrewjsimpson1977 » Tue Nov 22, 2016 4:19 pm

I think the letters may correspond to oversized pistons.

Ie...

A = +10 thou
B = +20 thou

Etc.

Suspect some or all of the pistons have been replaced at some point.
Happy to be proven wrong on this one if anyone else knows better..

Andy

Del

Re: Mistery piston

Post by Del » Tue Nov 29, 2016 10:29 pm

The letters probably rate to the grade of the piston. When made there are slight differences in sizes, so they tend to grade them to suit bores of the same grade. If you look on the block face you might see letters near the cylinder bore.

Post Reply