2A Wiper Motor Cover Bracket - FAO Bomber

Any Land Rover related info can be posted here.
chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

2A Wiper Motor Cover Bracket - FAO Bomber

Post by chipbury » Thu Oct 20, 2016 10:05 am

Morning all,

I was just chatting to Martin (bomber71) about the wiper motor cover on a 2A - as usual a picture paints a thousand words so here they are!

The two brackets fit at either end of the vent panel (the LH one is the bigger bracket that the wiper motor cover fixes to).

A smaller seal holder 346391 rivets to the two brackets that the seal slides into.
Attachments
photo.JPG
photo.JPG (409.39 KiB) Viewed 2004 times
Seal 3.JPG
Seal 3.JPG (223 KiB) Viewed 2004 times
2A - 39 FG 70

User avatar
Sidders101
Bake Off Judge
Posts: 2406
Joined: Wed Apr 02, 2014 7:57 pm
Location: Winchester

Re: 2A Wiper Motor Cover Bracket - FAO Bomber

Post by Sidders101 » Thu Oct 20, 2016 1:57 pm

Ahem....!!!!!! Suggsy.
Sidders


1974 Series 3 LWT 12v RHD 69-FM-24 , Royal Marines ("Intrepid")
1976 101 forward control gun tractor 12v RHD- 73-FL-43 ex 1,2 & 3 Para ("Kryten")
1979 Sankey NT Trailer 06-HF-86 78 Engr Reg (Herman)
1978 Trophy Frank Spencer impression (1st place)

BOMBER71
Pastry Chef
Posts: 524
Joined: Thu Jul 25, 2013 12:47 pm
Location: BLANDFORD DORSET

Re: 2A Wiper Motor Cover Bracket - FAO Bomber

Post by BOMBER71 » Thu Oct 20, 2016 8:50 pm

Hi Chris , It was good to talk to you today and many thanks for posting the picture . I can see now why i cannot get my cover to fit . I have gone back and looked at my pictures when i stripped my landrover and the bracket was on the vent panel before i sent it away to be refurbished but was not on it when it returned ! I will look for the part number and source a replacement. Enjoy your trip away and i will catch up with you next week. Cheers Martin
series 2a lightweight 40 FG 24. Landrover wolf 90 LN 92 AA Landrover 101 24v FFR 74 FL 87 EX 12AD RAPIER LAUNCHER. Landrover 101 12v RHD 73 FL 30 EX 7 PARA

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: 2A Wiper Motor Cover Bracket - FAO Bomber

Post by chipbury » Fri Oct 28, 2016 7:53 am

Does anyone know if there is a 2A specific part number for the LH bracket shown above?

In the series 3 parts book they are shown as RH 335498 / LH 335499
2A - 39 FG 70

User avatar
andracav
Posts: 44
Joined: Tue Sep 18, 2012 4:41 pm
Location: Bergamo-Italy

Re: 2A Wiper Motor Cover Bracket - FAO Bomber

Post by andracav » Fri Oct 28, 2016 10:47 am

Hello,
anyone can give me that seal (right and left) part code and where I could find it?
Thanks in advance
Andrea
@ndracav

30FK91

88lr
Posts: 285
Joined: Sat Jun 27, 2015 3:59 pm

Re: 2A Wiper Motor Cover Bracket - FAO Bomber

Post by 88lr » Fri Oct 28, 2016 7:35 pm

Does anyone know if there is a 2A specific part number for the LH bracket shown above? In the series 3 parts book they are shown as RH 335498 / LH 335499
They are the same.
Seal is 346391 (not handed)

BOMBER71
Pastry Chef
Posts: 524
Joined: Thu Jul 25, 2013 12:47 pm
Location: BLANDFORD DORSET

Re: 2A Wiper Motor Cover Bracket - FAO Bomber

Post by BOMBER71 » Fri Oct 28, 2016 8:33 pm

chipbury wrote:Does anyone know if there is a 2A specific part number for the LH bracket shown above?

In the series 3 parts book they are shown as RH 335498 / LH 335499
Hi Chris , You beat me to it hopefully Norman will come on with the part number . I asked Blanchards but they did not know the difference between the 2a and 3 . If they have one i wonder how much they would charge for it ! Cheers Martin
series 2a lightweight 40 FG 24. Landrover wolf 90 LN 92 AA Landrover 101 24v FFR 74 FL 87 EX 12AD RAPIER LAUNCHER. Landrover 101 12v RHD 73 FL 30 EX 7 PARA

User avatar
StuWright
Master Baker
Posts: 1740
Joined: Wed Feb 24, 2016 11:10 pm
Location: Southampton

Re: 2A Wiper Motor Cover Bracket - FAO Bomber

Post by StuWright » Wed Nov 09, 2016 10:01 pm

I am a bit confused on the answers to this thread and wondered if anyone would explain please?

I have the seal and metal holder already like a series 3, but need the 2 extra brackets so I can fit my series 2a metal cover.
Thanks

Stu

55AM52 Ex RAF Land Rover Lightweight GS

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: 2A Wiper Motor Cover Bracket - FAO Bomber

Post by removeduser185 » Wed Nov 09, 2016 10:28 pm

Ah, I see the problem, Stu. This is a picture of the set-up on the Series 3. The door seal brackets aren't the same as those for the Series 2A with the metal wiper motor box as they lack the extra right angle strip with the two securing bolt holes which you need for attaching the left-hand side f the wiper motor cover. If you compare this rough photo with the excellent Chris one, you'll see what I mean. Bear in mind that, in my photo, the windscreen securing bolt is hanging down as the windscreen has been removed - normally it would be sticking up.

Fred
Attachments
outside view of wiper motor cover small.jpg
outside view of wiper motor cover small.jpg (785.32 KiB) Viewed 1854 times

User avatar
StuWright
Master Baker
Posts: 1740
Joined: Wed Feb 24, 2016 11:10 pm
Location: Southampton

Re: 2A Wiper Motor Cover Bracket - FAO Bomber

Post by StuWright » Thu Nov 10, 2016 7:44 am

chipbury wrote:Morning all,

I was just chatting to Martin (bomber71) about the wiper motor cover on a 2A - as usual a picture paints a thousand words so here they are!

The two brackets fit at either end of the vent panel (the LH one is the bigger bracket that the wiper motor cover fixes to).

A smaller seal holder 346391 rivets to the two brackets that the seal slides into.
Have you got a picture of what the bracket looks like underneath please? I'm trying to work out how the extra bit that the cover fits on attaches.
Thanks

Stu

55AM52 Ex RAF Land Rover Lightweight GS

Post Reply