Sankey Widetrack brake overrun..........

Any trailer related disscussion
Post Reply
Vlaanderen

Sankey Widetrack brake overrun..........

Post by Vlaanderen » Wed Jun 20, 2012 9:08 pm

Hi to all,

Anyone know what gap there should be between the brake lever, no 10, and the adjustable bolt, no 11, at the end of the towing ring;

Photo is from a Narrow Track.
Image2.jpg
Image2.jpg (24.79 KiB) Viewed 4845 times
Regards, Norman.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Sankey Widetrack brake overrun..........

Post by AR4412 » Wed Jun 20, 2012 11:19 pm

Hi Norman,

IIRC it is adjusted like so.

Make sure the brake shoes are correctly adjusted and then,

Chock the wheels and release the handbrake.
Ensure the draught eye (Overrun damper) is fully forwards.
Release locknut on operating bolt and screw inwards to create a gap between it and the brake lever.
Push brake operating lever fully forwards.
Wind out the operating bolt until its head just touches the brake lever and then tighten the locknut.
Move the trailer back and forth to ensure brakes are free.
Attach to your vehicle and push trailer backwards to ensure the brakes apply.

Been a while since I did one.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

Vlaanderen

Re: Sankey Widetrack brake overrun..........

Post by Vlaanderen » Wed Jun 20, 2012 11:51 pm

Hi Neil,

Many thanks for your info, it is what I had thought of, just needed some confirmation, (from a person in the know :) ).

Are you at Beltring this year?.

Regards, Norman.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Sankey Widetrack brake overrun..........

Post by AR4412 » Thu Jun 21, 2012 12:45 am

Vlaanderen wrote:Are you at Beltring this year?.

Regards, Norman.
I'm hoping to make it for a visit on the Saturday, I'm on course/briefings in the week beforehand. It depends on what else gets thrown our way, they keep changing the plans every five minutes at the moment. We're meant to be going on training this Saturday, or Sunday, maybe Monday. 'Wait out and we'll get back to you.' SNAFU. Security training for the Olympics has got most of the Army running around not knowing what's going on at the moment.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
Chaos
Master Baker
Posts: 1271
Joined: Sun May 30, 2010 10:21 pm
Location: Hook, Hants

Re: Sankey Widetrack brake overrun..........

Post by Chaos » Thu Jun 21, 2012 7:47 pm

Might be different on a brake sho'ed Sankey but when Cam,Hibbo and myself adjusted the Brakes on Geoff's Sankey at the Overlord show we discovered(Via Cam's Ipad and tinternet) that there was a gap of 3.5 mm between stop and lever,
Don't mean to cloud the issue but the Sankey towed and braked perfect afterwards.
Steve


74 FM 18, a 1974 series 3 Ex Northern Ireland 24 Volt FFR VPK.

Vlaanderen

Re: Sankey Widetrack brake overrun..........

Post by Vlaanderen » Thu Jun 21, 2012 9:27 pm

Many thanks Steve. I'll go along with Neils recommendation and have a gap of 3.5mm. Sounds feasable to me. Will adjust at weekend and take the trailer out for a trial blast.

Regards, Norman.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Sankey Widetrack brake overrun..........

Post by AR4412 » Thu Jun 21, 2012 9:44 pm

I was going off what I was taught many years ago when I was Germany, doesn't mean those who taught me were right though. :lol:

A gap of 3.5mm won't cause any braking problems. A gap has the advantage of that it will help to stop the brakes from trying to apply as it bumps along behind you, and as you come off the gas, but they would still apply when you want them to.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
cam3r0n
Master Baker
Posts: 1591
Joined: Fri Mar 05, 2010 1:45 pm
Location: Swindon

Re: Sankey Widetrack brake overrun..........

Post by cam3r0n » Thu Jun 21, 2012 10:24 pm

If I rember right it was precisely 3.54mm as we all debated the .04 and surmised it must be an imperial conversion.
Cam

1980 SIII Lightweight GS 15HG59
1966 3/4 Ton Sankey 19ES51
1968 3/4 Ton Sankey 33ET83 - deceased and partly stolen

Jons 109

Re: Sankey Widetrack brake overrun..........

Post by Jons 109 » Sun Jun 05, 2016 7:25 am

AR4412 wrote:Hi Norman,

IIRC it is adjusted like so.

Make sure the brake shoes are correctly adjusted and then,

Chock the wheels and release the handbrake.
Ensure the draught eye (Overrun damper) is fully forwards.
Release locknut on operating bolt and screw inwards to create a gap between it and the brake lever.
Push brake operating lever fully forwards.
Wind out the operating bolt until its head just touches the brake lever and then tighten the locknut.
Move the trailer back and forth to ensure brakes are free.
Attach to your vehicle and push trailer backwards to ensure the brakes apply.

Been a while since I did one.

Regards,
Just what I'm after thanks, by brake operating lever do you mean the handbrake?
Thanks
Jon

Post Reply