Look down the front of the engine at the crankshaft pulley. You should see a metal plate with 3 pointers just above. There is a notch in the pulley rim which is TDC of the No. 1 cylinder.
Rotate the engine with the starting handle until the notch is in line with the 3rd pointer (furthest right) and the rotor arm points to the No. 1 cyl spark plug lead . This should have your engine at TDC and is a good position to set your contact breaker points just opening with modern fuels.
Having got the engine started and warmed up take it for a road test. Find a hill (not too steep) and drive up in 4th gear at low revs (don't labour the engine) under full throttle. If you hear a rattling sound - pre-ignition ('Pinking'), retard the timing a little. If you don't hear anything then you can try advancing the ignition a little until you do, then back off a bit.
If after a longer trip the engine runs on a little when you switch off the ignition, you probably need to retard the timing a tad more.
Remember the distributor shaft rotates ant-clockwise. So turning the distributor body anti-clockwise retards the timing, clockwise advances it.
What is that?
Any Land Rover related info can be posted here.
Return to “General Land Rover information”
Jump to
- Welcome
- ↳ Introductions
- ↳ Registering on this forum
- Your Land Rover
- ↳ General Land Rover information
- ↳ Your Land Rover Projects
- ↳ Problems
- ↳ Military Vehicle History
- Your Sankey Trailer
- ↳ General Trailer Information
- ↳ Your Sankey Project
- ↳ Trailer Problems
- Military Equipment
- ↳ Radio Equipment
- ↳ Weapons
- ↳ Uniforms
- ↳ Specialist Equipment
- ↳ Other Kit
- ↳ Reference Material
- ↳ Uniforms - Impressions
- Events
- ↳ Shows, Meetings and Gatherings
- General
- ↳ Other Topics.
- ↳ Cake Pictures
- ↳ Members Other Vehicles/Projects - Military and Non-Military
- ↳ Forum Relay
- Military Lightweight Website
- ↳ Click here if you are unable to log in
- ↳ Whats new on the website?
- Marketplace
- ↳ Complete Vehicles, for sale or wanted.
- ↳ Parts and accessories FOR SALE
- ↳ Parts and accessories WANTED
- ↳ Miscellaneous