Page 1 of 1
Which Distributor & Ballast Resistor
Posted: Wed Nov 12, 2025 10:41 pm
by Devon13
Evening, I am just trying to figure out which type of distributor I have on my 1979 12v and if it has a ballast resistor, as I can’t find one and only one of the positive terminals is connected on the coil. Thinking of buying the Lumenition optical units with their coil. Any help much appreciated. Regards Mark
Re: Which Distributor & Ballast Resistor
Posted: Thu Nov 13, 2025 11:14 am
by DormyLtWt
Thats a Ducellier distributor. Most easily identified by the capacitor on the outside.
You won't have a ballast resistor as the standard coil has resistance built in.
If you buy a lumenition unit together with Lumenition coil, then I would think they should be compatible.
HTH
Ian
Re: Which Distributor & Ballast Resistor
Posted: Thu Nov 13, 2025 2:22 pm
by Devon13
Thanks Ian
Re: Which Distributor & Ballast Resistor
Posted: Wed Dec 31, 2025 3:11 pm
by LarryH57
I suggest fitting electronic ignition to your Ducellier as I did about 12 years ago. It was from a firm with the odd name of 'SimonBBC', which has become or now appears to be operating as Powerspark Ignition Ltd. No need for a ballaast resistor and I have used a standard 12 v coil with it. Highly recommended as it is hidden under the dizzy cap. I have no connection to the firm or owner.
Re: Which Distributor & Ballast Resistor
Posted: Thu Jan 01, 2026 2:04 am
by DormyLtWt
Electronic ignition is definately a good thing but always, always, carry your old points and condeser (known good ones, not cheap ones off e-bay) just in case.